How To Add Markers To Chart |
How To Add Markers To Chart - Excel |
|
One of the most bothersome problems for a scientific/engineering application in excel is that there aren't enough markers to go around for a scatter plot. The easiest way to get around this is to make your own. This discussion was implemented in Excel 2007
First you need to draw your own symbols and save them as gif, or png files. This can be done with a variety of packages including Inkscape (free!) or MSPaint. I did mine with Inkscape. Just draw a polygon (say a hexagon) with thick lines (2 pt or thicker). Then save/export the symbol to a .gif or .png file. You may want to make up a bunch of these and give them clever names like hex2pt.png or inverttri3pt.gif so that you can remember later.
In Excel, build your chart like always, then if you need a custom symbol do this:
1. Use built-in marker option for a square (it's symbol size will dictate your symbol size)
2. Go to Marker Line Color and select "No Color"
3. Go to Marker Fill and select "Picture or Texture fill"
4. Get the file that has your favorite polygon (like hex2.png)
5. Click on Insert and you got it.
6. Note: you need to select the square marker as your marker otherwise your custom symbol will be clipped off.
You can generate an infinite (well, nearly infinite) number of symbols this way. The size of the symbol is goverened by the size of the "square" marker you selected in step 1.
Hope this is helpful
First you need to draw your own symbols and save them as gif, or png files. This can be done with a variety of packages including Inkscape (free!) or MSPaint. I did mine with Inkscape. Just draw a polygon (say a hexagon) with thick lines (2 pt or thicker). Then save/export the symbol to a .gif or .png file. You may want to make up a bunch of these and give them clever names like hex2pt.png or inverttri3pt.gif so that you can remember later.
In Excel, build your chart like always, then if you need a custom symbol do this:
1. Use built-in marker option for a square (it's symbol size will dictate your symbol size)
2. Go to Marker Line Color and select "No Color"
3. Go to Marker Fill and select "Picture or Texture fill"
4. Get the file that has your favorite polygon (like hex2.png)
5. Click on Insert and you got it.
6. Note: you need to select the square marker as your marker otherwise your custom symbol will be clipped off.
You can generate an infinite (well, nearly infinite) number of symbols this way. The size of the symbol is goverened by the size of the "square" marker you selected in step 1.
Hope this is helpful
Excel VBA Course - From Beginner to Expert
200+ Video Lessons 50+ Hours of Instruction 200+ Excel Guides
Become a master of VBA and Macros in Excel and learn how to automate all of your tasks in Excel with this online course. (No VBA experience required.)
(80% Discount Ends Soon!)
Similar Topics
Hi, hope someone can assist, i want to add some arrow syimbols in to a formula, so that when the formula works out it shows an up arrow for higher or a down arrow for lower, i am using this formula at the moment because i dont know any better but it works, putting in the word up or down:
I have entered the following formula in to a cell: =IF(S3<R3,"DOWN","UP") it works however i want to replace the word Down and up with the relevant arrows symbol. How do i do this?
Thanks
I have entered the following formula in to a cell: =IF(S3<R3,"DOWN","UP") it works however i want to replace the word Down and up with the relevant arrows symbol. How do i do this?
Thanks
I would like the contents of a selected active cell to be displayed in a certain other cell, say R4. When another cell is selected and active, that cell's contents should be displayed.
I have an array of 9 columns and 20 rows with equity symbols and conditionally formatted to show the severity of price movement in either direction.
Instead of typing in the value of whatever cell a trader is looking at I would like for them to just be able to click on the cell and have that symbol copied into R4 so some detailed information can be displayed for them.
Can't find a thing about this on any forum or msdn.
Hope I'm explaining this at least somewhat clearly.
Thanks.
I have an array of 9 columns and 20 rows with equity symbols and conditionally formatted to show the severity of price movement in either direction.
Instead of typing in the value of whatever cell a trader is looking at I would like for them to just be able to click on the cell and have that symbol copied into R4 so some detailed information can be displayed for them.
Can't find a thing about this on any forum or msdn.
Hope I'm explaining this at least somewhat clearly.
Thanks.
I am a very advanced Excel user so this is a new one for me.
When I open any spreadsheet (new or already populated) the black box that normally frames the active cell is missing (showing which cell you have selected). Likewise when I 'select all' the sheet does not become shaded.
In addition:
Can not fill series
Can not change cell format (specifically to show Currency or Accounting w/$ symbol)
And I am sure there is much more that I have not found yet. I have not seen a single thread on this topic anywhere on the internet.
Help!
When I open any spreadsheet (new or already populated) the black box that normally frames the active cell is missing (showing which cell you have selected). Likewise when I 'select all' the sheet does not become shaded.
In addition:
Can not fill series
Can not change cell format (specifically to show Currency or Accounting w/$ symbol)
And I am sure there is much more that I have not found yet. I have not seen a single thread on this topic anywhere on the internet.
Help!
I have a textbox in my userform where anything typed in the box is entered into cell A2 in my worksheet. However, multiple lines of text are not properly displayed in my worksheet. I have enabled MultiLine and EnterKeyBehaviour in the properties window of the textbox so I can type multiple lines in my textbox. The problem is that when I press the button to enter the text from my txtbox to cell A2, the cell doesn't actually display the text in separate lines. It just places a square symbol in the place that enter should have been pressed and the text should have been split into separate lines.
How can I get the separate lines of text in my textbox to be properly displayed in a cell? Thanks for your help in advance..
How can I get the separate lines of text in my textbox to be properly displayed in a cell? Thanks for your help in advance..
Imagine a whole box of lengths of aluminium sections for making windows.
To make those windows I need to cut these lengths into smaller sizes.
I need to do this economically.
How can I use Excel to help me make this a reality.
Firstly you would take a big size out of it and then another size out of the offcut piece.
And then another size out of the offcut left over.
I need to know how many full stock lengths (6500) long it will take to cut all the pieces listed above.
Is it possible?
You need to take into account the quantity of each size and fit it all in together for the most optimal outcome.
See attached example of possible layout.
To make those windows I need to cut these lengths into smaller sizes.
I need to do this economically.
How can I use Excel to help me make this a reality.
Firstly you would take a big size out of it and then another size out of the offcut piece.
And then another size out of the offcut left over.
I need to know how many full stock lengths (6500) long it will take to cut all the pieces listed above.
Is it possible?
You need to take into account the quantity of each size and fit it all in together for the most optimal outcome.
See attached example of possible layout.
I know this question has been asked a bajillion times, so I apologize for the redundancy.
I am working with an Excel spreadsheet and saving it as a .csv file in order to upload to an application that parses out the .csv data as transactions. The system requires .csv files, so this is how I need to save my doc (with this extension). I have been successful at preventing Excel from coverting that long number into scientific format. I have saved as a TXT file, pasted the longer number and it displays correctly. That is all good. But I have to save as a .csv. So if I do that, close the Excel window, and then open again (as the .csv file), the numbers are back to being displayed in scientific format. I have tried creating an Excel doc from scratch and entering text in Text format, to see if this created a cleaner file. But again, the second I save as .csv, close the window and then open that file up again, that dang scientific format is back.
Does anyone have any idea of how to work around this? Once I have successfully gotten the numbers to display as the long-chain number, how can I get them to "stick" so that they don't revert back to scientific format when I reopen the file?
Thanks so much for your help!
I am working with an Excel spreadsheet and saving it as a .csv file in order to upload to an application that parses out the .csv data as transactions. The system requires .csv files, so this is how I need to save my doc (with this extension). I have been successful at preventing Excel from coverting that long number into scientific format. I have saved as a TXT file, pasted the longer number and it displays correctly. That is all good. But I have to save as a .csv. So if I do that, close the Excel window, and then open again (as the .csv file), the numbers are back to being displayed in scientific format. I have tried creating an Excel doc from scratch and entering text in Text format, to see if this created a cleaner file. But again, the second I save as .csv, close the window and then open that file up again, that dang scientific format is back.
Does anyone have any idea of how to work around this? Once I have successfully gotten the numbers to display as the long-chain number, how can I get them to "stick" so that they don't revert back to scientific format when I reopen the file?
Thanks so much for your help!
I have an extensive spreadsheet with several columns and all showing borders
where each cell/column begins and ends. However there are a few cells where
the break with the next cell does not show the line.
I have highlighed the cell in question, gone to format/cell/borders and
everything looks fine. Black color + format border shows square with all
sides of square showing.
Any thoughts on how to fix these few random cells.
Thanks
where each cell/column begins and ends. However there are a few cells where
the break with the next cell does not show the line.
I have highlighed the cell in question, gone to format/cell/borders and
everything looks fine. Black color + format border shows square with all
sides of square showing.
Any thoughts on how to fix these few random cells.
Thanks
I did a search in here but didn't find an answer so here goes nothing...
I have a spreadsheet with data from A1 to H1 down to A275 to H275. I select all of it, Copy, go into the Sheet2 tab and select A1, Paste Special -> Transpose and it give me the following error message:
Quote:
The information cannot be pasted because the Copy area and the paste area are not the same size and shape. Try one of the following:
- Click a single cell, and then paste.
- Select a rectangle that's the same size and shape, and then paste.
For the life of me, I can't figure out why it's not working! I have done this many times with other spreadsheets. Has anyone ever experienced this? If so, were you able to resolve it and how?
Many Thanks,
Mike
I have a spreadsheet with data from A1 to H1 down to A275 to H275. I select all of it, Copy, go into the Sheet2 tab and select A1, Paste Special -> Transpose and it give me the following error message:
Quote:
The information cannot be pasted because the Copy area and the paste area are not the same size and shape. Try one of the following:
- Click a single cell, and then paste.
- Select a rectangle that's the same size and shape, and then paste.
For the life of me, I can't figure out why it's not working! I have done this many times with other spreadsheets. Has anyone ever experienced this? If so, were you able to resolve it and how?
Many Thanks,
Mike
I have a file that became too big due to phantom bloat, unused range saved by Excel and all that kind of reasons. Thank to previous posts on that board tackling that issue, I was able to find how to proceed to reduce the file back to its normal size.
But I did so in a beta file (test file). The real file has become so big (103MB!) that Excel cannot even open it anymore! The file contains archive info that we do not have anywhere else.
Is there anyway then to open the file or to reduce its size without opening it (through magics...)? I just honestly don't know how to retrieve that info before deleting that file.
Thank you very much for your help.
But I did so in a beta file (test file). The real file has become so big (103MB!) that Excel cannot even open it anymore! The file contains archive info that we do not have anywhere else.
Is there anyway then to open the file or to reduce its size without opening it (through magics...)? I just honestly don't know how to retrieve that info before deleting that file.
Thank you very much for your help.
I'm working on an Excel file that it's size is about 90 M.B and that makes it very slow to deal with ... is there anyhow to make it faster ???
i use in it alot of formulas and conditional formats
thank u
i use in it alot of formulas and conditional formats
thank u
I was wondering if there is a way of getting a macro to open the "save as" dialogue box and then have it fill in the "file name" field.
I dont want it to actually make the save though as I want the user to have the chance to check that the save location is correct and the option to change the filename if required.
Cheers.
I dont want it to actually make the save though as I want the user to have the chance to check that the save location is correct and the option to change the filename if required.
Cheers.
Hello, I am pretty new to excel programming/messing around so I'll refer to those who are much wiser than I am. I am trying to set up a form for work, in this form I want to have a page with a bunch of cells pre-sized. What I want to do is when I insert a picture from a job site, that when this picture gets inserted, it will automatically resize to fit within the cell. I don't have time to manually resize dozens of pictures and if I could get this to work it would be awesome! I tried to search for an answer using the search function, but I kept getting a fatal error about allowable memory? Thanks in advance for you help!
I have searched and read all the help files. I find the properties of
an object, I see how I can "lock", "size and move with cells" or "not
move with cells". No matter what I select, the object moves off the
screen, when the user, scrolls to the right of the spreadsheet.
Is there a way to lock the position, let's say , in the upper right
corner and have it stay there?
This would be quite useful for an EXIT button, that I have created,
that will close the program without saving (it's a read-only file.)
Thanks to all the wonderful people here that have been so helpful and
give us their valuable insight and time.
Jo
an object, I see how I can "lock", "size and move with cells" or "not
move with cells". No matter what I select, the object moves off the
screen, when the user, scrolls to the right of the spreadsheet.
Is there a way to lock the position, let's say , in the upper right
corner and have it stay there?
This would be quite useful for an EXIT button, that I have created,
that will close the program without saving (it's a read-only file.)
Thanks to all the wonderful people here that have been so helpful and
give us their valuable insight and time.
Jo
Is there a way I can use conditional formatting or something to change the color of the cell once I enter a value or text into that cell? For example if I currently have the A2 cell color as a gray color, and I enter information into A2 can I have it set to automatically change to no fill or any other color without having to click out of the cell, back into it, and then clicking the button?? Does that make sense??? Can someone help me?
I'm trying to use conditional formatting to highlight phone calls that came in between certain hours.
The call times are in the custom format h:mm, although it could easily be changed to an Excel time format. I'm using Excel 2002. I want the cell to have a different fill color if it falls within particular time frames.
Example: If the call came in between 22:00 and 23:59 color is light green.
If the call came in between 23:59 and 08:00 the color is yellow.
Example spreadsheet is attached.
Thanks in advance.
The call times are in the custom format h:mm, although it could easily be changed to an Excel time format. I'm using Excel 2002. I want the cell to have a different fill color if it falls within particular time frames.
Example: If the call came in between 22:00 and 23:59 color is light green.
If the call came in between 23:59 and 08:00 the color is yellow.
Example spreadsheet is attached.
Thanks in advance.
When using the copy and paste function it is extremely slow to paste the
result. Also the file size seems to be increasing to a much larger size for
no reason.
Any feedback would be appreciated.
result. Also the file size seems to be increasing to a much larger size for
no reason.
Any feedback would be appreciated.
Sorry for the question. Normally I find answers to my excel questions by going through the help tab or by searching on Google. However, I don't even know what question to ask on this one!?!
Basically I have created a spreadsheet with several columns, but I have one column that lists the shirt size (YS, YM, YL, AS, AM, AL, XL, 2X, 3X) of each person. Is there a formula that I can create that will tabulate the number of sizes (i.e. AS=2, AM=7, etc.)?
In previous years I made a column for each size, and simply placed a "1" in the correct column, and had excel just add the 1's from each column. However, that takes more time and space. I was hoping to streamline it this time around.
Thanks for taking the time to read this post. Any help would be appreciated! Thanks, doug
Basically I have created a spreadsheet with several columns, but I have one column that lists the shirt size (YS, YM, YL, AS, AM, AL, XL, 2X, 3X) of each person. Is there a formula that I can create that will tabulate the number of sizes (i.e. AS=2, AM=7, etc.)?
In previous years I made a column for each size, and simply placed a "1" in the correct column, and had excel just add the 1's from each column. However, that takes more time and space. I was hoping to streamline it this time around.
Thanks for taking the time to read this post. Any help would be appreciated! Thanks, doug
Hi
I am using Excel 2007 and suddenly I can no longer filter by color. The option is greyed out and so is the sort by Color option. Does anyone have any idea why this would happen?
Thanks in advance.
I am using Excel 2007 and suddenly I can no longer filter by color. The option is greyed out and so is the sort by Color option. Does anyone have any idea why this would happen?
Thanks in advance.
I have a co-worker's file that he is having trouble with. He is using Excel 2000 SP3. When copying a cell with a formula in it of "=D6+C6" and pasting it into the next cell down, it will display the same value in the cell as the calculated value from above, but has the correct formula displayed in the formula bar of "=D7+C7".
Example:
A1: 50
A2: 10
B1: 60
B2: 20
A3: Formula: =A1+A2 Displays: 60
Right click A3, Copy, right click B3, paste
A3 displays 60
When I click save, it will change the display value to 80.
I am trying this on his workstation and mine. Mine has Office 2010, so I think there might be an issue with the file itself.
Also, not just copy and paste. I can also just click the top cell after filling in the formula and then drag the bottom right of the cell downward and it will do the same of filling in the correct formula, but have the incorrect value.
I know that I could get him to just click save each time before really looking at the results, but that is just a band aid to the problem.
Any ideas how to fix this?
Example:
A1: 50
A2: 10
B1: 60
B2: 20
A3: Formula: =A1+A2 Displays: 60
Right click A3, Copy, right click B3, paste
A3 displays 60
When I click save, it will change the display value to 80.
I am trying this on his workstation and mine. Mine has Office 2010, so I think there might be an issue with the file itself.
Also, not just copy and paste. I can also just click the top cell after filling in the formula and then drag the bottom right of the cell downward and it will do the same of filling in the correct formula, but have the incorrect value.
I know that I could get him to just click save each time before really looking at the results, but that is just a band aid to the problem.
Any ideas how to fix this?
I did a bit of browsing on this problem. Found others suffering the same but haven't found any conclusive answer yet.
Every so often when I attempt to save a file, (including save as), Excel won'r let me. By won't let me I mean:
using Save doesn't appear to do anything using Save As doesn't either do anything, the dialog is not displayed and if I am doing via the File menu then the File menu is exited and the previous ribbon tab is displayed (i.ethe one I was on before clicking 'File') if I close the workbook I am prompted to save, close without saving or cancel. Clicking save just invokes the same msgbox again. I can't work out when it goes into this mode. Some days I can work without this problem, other days I encounter this 2 or 3 times.
The only thing I could suspect was I think this started around about the time I installed xlDennis' code library. I have uninstalled the addin and so far so good, but I cannot categorically say that this was the cause.
Anyone have any idea?
Cheers
Jon
Edit: I have read this: http://support.microsoft.com/kb/271513
Doesn't seem to cover the issue I describe
Every so often when I attempt to save a file, (including save as), Excel won'r let me. By won't let me I mean:
using Save doesn't appear to do anything using Save As doesn't either do anything, the dialog is not displayed and if I am doing via the File menu then the File menu is exited and the previous ribbon tab is displayed (i.ethe one I was on before clicking 'File') if I close the workbook I am prompted to save, close without saving or cancel. Clicking save just invokes the same msgbox again. I can't work out when it goes into this mode. Some days I can work without this problem, other days I encounter this 2 or 3 times.
The only thing I could suspect was I think this started around about the time I installed xlDennis' code library. I have uninstalled the addin and so far so good, but I cannot categorically say that this was the cause.
Anyone have any idea?
Cheers
Jon
Edit: I have read this: http://support.microsoft.com/kb/271513
Doesn't seem to cover the issue I describe