How To Pause Macro Then Select Object? |
How To Pause Macro Then Select Object? - Excel |
|
Hi Everyone,
I have found code to pause a macro and select a range of cells using an inputbox. This is NOT what I want to do. What I wish to do is pause the macro, allow the user to select an object (it will be a picture as an embedded object), then restart the macro (ie: the macro will tell it where to copy and paste the picture).
If it is possible to restart the macro automatically upon selecting the object that is great, but even better would be an OK button on the message box.
Is there a method whereby an vbokonly messagebox appears (the text will prompt the user to select a picture), then once the ok button is clicked it will restart the macro?
I have found code to pause a macro and select a range of cells using an inputbox. This is NOT what I want to do. What I wish to do is pause the macro, allow the user to select an object (it will be a picture as an embedded object), then restart the macro (ie: the macro will tell it where to copy and paste the picture).
If it is possible to restart the macro automatically upon selecting the object that is great, but even better would be an OK button on the message box.
Is there a method whereby an vbokonly messagebox appears (the text will prompt the user to select a picture), then once the ok button is clicked it will restart the macro?
Excel VBA Course - From Beginner to Expert
200+ Video Lessons 50+ Hours of Instruction 200+ Excel Guides
Become a master of VBA and Macros in Excel and learn how to automate all of your tasks in Excel with this online course. (No VBA experience required.)
(80% Discount Ends Soon!)
Similar Topics
Hello,
As the title goes this is as simple as it gets. The macro worked good when I was using excel 2003 but now that I have 2007 everything works for except the resizing (Picture.Width & Picture. Height).
Code:
I have tried to record some macros while I am resizing the pictures but to no avail the macros are blank.
Please help
Thanks!
As the title goes this is as simple as it gets. The macro worked good when I was using excel 2003 but now that I have 2007 everything works for except the resizing (Picture.Width & Picture. Height).
Code:
Sub AddImage()
Dim strPath As String
Dim strFile As String
Dim Picture As Object
Dim Response As String
Dim C As Range
strPath = "C:\\Photos\"
For Each C In Range("A1", Range("A65536").End(xlUp))
If C 0 Then
With C.Offset(0, 1)
Set Picture = Nothing
On Error Resume Next
Set Picture = Sheets("Raw Pix").Pictures.Insert(strPath & C.Value & ".jpg")
Picture.Top = .Top
Picture.Left = .Left
Picture.LockAspectRatio = msoTrue
Picture.Width = 157
Picture.Height = 138
End With
End If
NextC:
Next C
End Sub
I have tried to record some macros while I am resizing the pictures but to no avail the macros are blank.
Please help
Thanks!
I have searched and read all the help files. I find the properties of
an object, I see how I can "lock", "size and move with cells" or "not
move with cells". No matter what I select, the object moves off the
screen, when the user, scrolls to the right of the spreadsheet.
Is there a way to lock the position, let's say , in the upper right
corner and have it stay there?
This would be quite useful for an EXIT button, that I have created,
that will close the program without saving (it's a read-only file.)
Thanks to all the wonderful people here that have been so helpful and
give us their valuable insight and time.
Jo
an object, I see how I can "lock", "size and move with cells" or "not
move with cells". No matter what I select, the object moves off the
screen, when the user, scrolls to the right of the spreadsheet.
Is there a way to lock the position, let's say , in the upper right
corner and have it stay there?
This would be quite useful for an EXIT button, that I have created,
that will close the program without saving (it's a read-only file.)
Thanks to all the wonderful people here that have been so helpful and
give us their valuable insight and time.
Jo
Hi All,
I got the below macro which uses IE and open the URLs. I want to create a userform with listbox with radio button and commandbutton on the same which will help me to connect to each url when I select the same in listbox and click on the commandbutton.
Code:
Any suggestions..
I got the below macro which uses IE and open the URLs. I want to create a userform with listbox with radio button and commandbutton on the same which will help me to connect to each url when I select the same in listbox and click on the commandbutton.
Code:
Sub DoBrowse1()
Dim ie As Object
Set ie = CreateObject("Internetexplorer.Application")
ie.Visible = True
ie.Navigate "www.google.com"
End Sub
Any suggestions..
I am looking for the code to select the visible data after applying a data filter. Actually I know how to select the data after applying the data filter but the issue is I am not able to exclude the header row and give the target range as used (non-blank) rows only!!
I am using below code to Select the Visible rows in the target range:
Code:
Problems in this code a
1) after applying the filter, while selecting the data it is selecting all the rows in given range till last row on the workbook. I need this to select the the data only till the last used row in the given range.
2) It is not possible to provide the address of the first row after we apply the filter since the first row address may change depending on the values in the table.
E.g. 1st time when I am running the macro the first row in the visible filtered data is starting at Cell address A4 and next time when I will run the macro it may be A6
3) The Code is also selecting the 1st row which is a header row. How can we exclude it from selection.
Some one please revert with the solution.
Thanks in advance.
I am using below code to Select the Visible rows in the target range:
Code:
Range("A:p").SpecialCells(xlCellTypeVisible).Select
Problems in this code a
1) after applying the filter, while selecting the data it is selecting all the rows in given range till last row on the workbook. I need this to select the the data only till the last used row in the given range.
2) It is not possible to provide the address of the first row after we apply the filter since the first row address may change depending on the values in the table.
E.g. 1st time when I am running the macro the first row in the visible filtered data is starting at Cell address A4 and next time when I will run the macro it may be A6
3) The Code is also selecting the 1st row which is a header row. How can we exclude it from selection.
Some one please revert with the solution.
Thanks in advance.
Helllo,
I have written a macro and at the end it displays a message "The macro has finished".
I would like this message box to disappear after 2 seconds automatically so that users don't have to press the OK button all the time.
can this happen ?
thanks
andy
I have written a macro and at the end it displays a message "The macro has finished".
I would like this message box to disappear after 2 seconds automatically so that users don't have to press the OK button all the time.
can this happen ?
thanks
andy
Is there a trick to copy-paste a group of cells into Outlook? I don't want to paste as a picture (shows up as an attachment and is lost when someone else Replies), but formatting is skewed when pasted as an Excel object. Right now I'm recreating the table in Word, then pasting, which doesn't loose formatting.
A specific problem is cells which don't have borders show up with very light grey borders in Outlook. This, I do not want.
TiA
A specific problem is cells which don't have borders show up with very light grey borders in Outlook. This, I do not want.
TiA
Hi all.
I have set up a workbook that is sent out to lots of different users. They each keep and use their own copy.
I have set it up so that everything looks OK and is visible on MY screen, but I'm conscious that some users may have different screen sizes, different toolbars set up, and so on, which might make some parts not immediately visible to them.
I have set up an auto-execute macro which automatically sets the zoom factor to best fit, for several of the worksheets, and this works fine.
Here's the code that does it.
Code:
By repeating this code for each worksheet, I can make each one be zoomed just right.
However, the file contains 8 sheets that are all identically laid out, except the number of rows is different.
What I want to do is go to the worksheet that has the largest number of rows (it's always the same worksheet, so I know which one it is), set the zoom factor for THAT worksheet (which I can do, and it always has the same number of rows), and then take THAT zoom factor, whatever it is - and it will vary depending on the user - and apply that to the other worksheets that have a similar layout.
I could just go through each worksheet and zoom it automatically, but that would mean that some of the sheets looked very large, others very small, and I'd like them to have a consistent appearance.
I could also specify a range on each worksheet that was similar to the appropriate range on the longest worksheet, and zoom that automatically, but that's not ideal either, because some of the row heights vary from sheet to sheet, and again I'll end up with different font sizes.
Anyone know how to do this ?
I have set up a workbook that is sent out to lots of different users. They each keep and use their own copy.
I have set it up so that everything looks OK and is visible on MY screen, but I'm conscious that some users may have different screen sizes, different toolbars set up, and so on, which might make some parts not immediately visible to them.
I have set up an auto-execute macro which automatically sets the zoom factor to best fit, for several of the worksheets, and this works fine.
Here's the code that does it.
Code:
Sheets("WELCOME").Select
Range("A1:N18").Select
ActiveWindow.Zoom = True
By repeating this code for each worksheet, I can make each one be zoomed just right.
However, the file contains 8 sheets that are all identically laid out, except the number of rows is different.
What I want to do is go to the worksheet that has the largest number of rows (it's always the same worksheet, so I know which one it is), set the zoom factor for THAT worksheet (which I can do, and it always has the same number of rows), and then take THAT zoom factor, whatever it is - and it will vary depending on the user - and apply that to the other worksheets that have a similar layout.
I could just go through each worksheet and zoom it automatically, but that would mean that some of the sheets looked very large, others very small, and I'd like them to have a consistent appearance.
I could also specify a range on each worksheet that was similar to the appropriate range on the longest worksheet, and zoom that automatically, but that's not ideal either, because some of the row heights vary from sheet to sheet, and again I'll end up with different font sizes.
Anyone know how to do this ?
I have an Excel workbook that was created by a former coworker. It includes a macro that, among other things, displays a message box about the 2008 file. The macro runs as soon as the file is opened. I'd like to access that macro to correct the date to 2011 and see what else, if anything, it's doing for me (it doesn't appear to do much). I can find references to creating macros to hide and unhide rows/columns and I found ways to delete all macros in a workbook, but I cannot find anything about unhiding a macro without knowing its name.
Does anyone know of a way to unhide this macro?
Thanks!
Does anyone know of a way to unhide this macro?
Thanks!
I have an excel form, I want my users to be able to open the form, fill in appropriate data, then click the save button. When the button is clicked, the data in the form should be saved to a new file and then the original form should be reset (clear all values) for a new set of data entry. When the data is saved, I want the new excel sheet to be saved to a location specified within the macro so the user doesn't have any options and I want the title of the new file to be the value of one of the cells.
I'm new to macros and would appreciate any help this board can offer. Thanks...
I'm new to macros and would appreciate any help this board can offer. Thanks...
Hi there, longtime user firsttime poster. Looking for some help as I am a non-expert with macros. Here's what I'm trying to do:
We have to submit things to a certain regulatory body and we usually enter tasks in as soon as they come, do the submission, and then keep a record of that submission.
So, I have a workbook with two sheets, one is "TO DO", the other is "ARCHIVE". Both sheets have the same columns and everything. I am looking for a macro that will automatically cut a (row) from the TO DO sheet and paste it in into the ARCHIVE sheet once it is done, then delete the cut row from the TO DO list so it stays topped up.
The trigger for archiving is the columns M and N which are titled "Complete ?" and each has a validation drop down that says "YES". When both cells in columns M and N have the YES in them, I would like the macro to make the above mentioned actions.
I ran a search on the forums and found something similar, but not quite what I was looking for.
Any help?
We have to submit things to a certain regulatory body and we usually enter tasks in as soon as they come, do the submission, and then keep a record of that submission.
So, I have a workbook with two sheets, one is "TO DO", the other is "ARCHIVE". Both sheets have the same columns and everything. I am looking for a macro that will automatically cut a (row) from the TO DO sheet and paste it in into the ARCHIVE sheet once it is done, then delete the cut row from the TO DO list so it stays topped up.
The trigger for archiving is the columns M and N which are titled "Complete ?" and each has a validation drop down that says "YES". When both cells in columns M and N have the YES in them, I would like the macro to make the above mentioned actions.
I ran a search on the forums and found something similar, but not quite what I was looking for.
Any help?
I am using XL2007 and have a macro that refreshes microsoft query connections. The issue is the refreshes only happen if you step through the macro using the debugger. When you run the macro normally, everything else functions properly, but the data is not refreshed.
Any help is appreciated. Here is an excerpt of the code:
Workbooks.Open Filename:="C:\Profile.xls"
Sheets("SELECTION").Select
Range("F3").Value = SNR
' THIS PART ONLY WORKS IF YOU STEP THROUGH THE MACRO USING THE DEBUGGER...IF YOU RUN MACRO NORMALLY THE CONNECTIONS DO NOT REFRESH
ActiveWorkbook.Connections("Connection").Refresh
ActiveWorkbook.Connections("Connection14").Refresh
ActiveWorkbook.Connections("Query from C_Profile").Refresh
ActiveWorkbook.Connections("Query from C_Profile1").Refresh
Any help is appreciated. Here is an excerpt of the code:
Workbooks.Open Filename:="C:\Profile.xls"
Sheets("SELECTION").Select
Range("F3").Value = SNR
' THIS PART ONLY WORKS IF YOU STEP THROUGH THE MACRO USING THE DEBUGGER...IF YOU RUN MACRO NORMALLY THE CONNECTIONS DO NOT REFRESH
ActiveWorkbook.Connections("Connection").Refresh
ActiveWorkbook.Connections("Connection14").Refresh
ActiveWorkbook.Connections("Query from C_Profile").Refresh
ActiveWorkbook.Connections("Query from C_Profile1").Refresh
Hi everyone,
I found an excellent macro this morning that allows the user to filter a pivot table based on the value found in a specific cell. This cell essentially acts as a search bar, allowing the user to type in what they are looking for rather than select it from a drop-down list.
The macro works perfectly for my purposes except in one regard: I can no longer perform a "show all" filter. If I leave the "search bar" cell blank, the pivot table shows nothing. I'm sure that there is an easy fix for this but I'm still learning the basics of how to write and use macros. How can I change the code so that when I leave the cell blank, the pivot table shows all? The search bar cell is D2.
Thanks for your time!
I found an excellent macro this morning that allows the user to filter a pivot table based on the value found in a specific cell. This cell essentially acts as a search bar, allowing the user to type in what they are looking for rather than select it from a drop-down list.
The macro works perfectly for my purposes except in one regard: I can no longer perform a "show all" filter. If I leave the "search bar" cell blank, the pivot table shows nothing. I'm sure that there is an easy fix for this but I'm still learning the basics of how to write and use macros. How can I change the code so that when I leave the cell blank, the pivot table shows all? The search bar cell is D2.
Thanks for your time!
I am trying to get my macro to do this on open. Check if a1 is empty, if its empty run another macro (which is an input box to put something IN a1), but if A1 has something in it, DO NOTHING.
I keep getting errors, saying I'm not formulating my if statements correctly.
This is what I have:
Code:
I keep getting errors, saying I'm not formulating my if statements correctly.
This is what I have:
Code:
Private Sub Workbook_Open()
If Range("a1") = "" Then macrox
else do nothing
End If
End Sub
Hello, I am pretty new to excel programming/messing around so I'll refer to those who are much wiser than I am. I am trying to set up a form for work, in this form I want to have a page with a bunch of cells pre-sized. What I want to do is when I insert a picture from a job site, that when this picture gets inserted, it will automatically resize to fit within the cell. I don't have time to manually resize dozens of pictures and if I could get this to work it would be awesome! I tried to search for an answer using the search function, but I kept getting a fatal error about allowable memory? Thanks in advance for you help!
Hello everyone!!!!
Here is my situation. I have been trying to learn macros but have not made one yet. Need your help. Here at work, I have some incompentant computer workers who claim they KNOW MS sooo well and have certificates etc... *COUGH COUGH* ya ok... LMAO
We have a "shared" work book we all work in. It's nothing fancy, just use it as a PO Book but since it is shared some people continue to not save before they add in more work so that they see a "refreshed" copy of the workbook before they start writing in cells that already contain information.
How to I create a macro button at the top of the page that is literally a SAVE button.. instead of them saving by going to File - Save or cntrl+s ??? I just thought that MAYBE having a big button in their face will remind them.
Secondly as back up I was wondering if you can create a macro to do a refresh of everyones screens automatically - say every 2 or 5 mins??? I don't mean a save... but a refresh so the screen actually updates in front of you. (although I will keep this little piece of magic out of their knowledge so they don't rely on it, just though it would be a secondary back up to helping eliminate these mishaps cause we are loosing alot of information by people saving overtop of other peoples work and not caring.)
Thanks so much!!!!! Muchly appriciated.
Here is my situation. I have been trying to learn macros but have not made one yet. Need your help. Here at work, I have some incompentant computer workers who claim they KNOW MS sooo well and have certificates etc... *COUGH COUGH* ya ok... LMAO
We have a "shared" work book we all work in. It's nothing fancy, just use it as a PO Book but since it is shared some people continue to not save before they add in more work so that they see a "refreshed" copy of the workbook before they start writing in cells that already contain information.
How to I create a macro button at the top of the page that is literally a SAVE button.. instead of them saving by going to File - Save or cntrl+s ??? I just thought that MAYBE having a big button in their face will remind them.
Secondly as back up I was wondering if you can create a macro to do a refresh of everyones screens automatically - say every 2 or 5 mins??? I don't mean a save... but a refresh so the screen actually updates in front of you. (although I will keep this little piece of magic out of their knowledge so they don't rely on it, just though it would be a secondary back up to helping eliminate these mishaps cause we are loosing alot of information by people saving overtop of other peoples work and not caring.)
Thanks so much!!!!! Muchly appriciated.
I have an image or picture within a worksheet.
I want to be able to reference it from a cell so that depending on a
validation list a different picture is shown.
Is this possible in Microsoft Exec 2000
I want to be able to reference it from a cell so that depending on a
validation list a different picture is shown.
Is this possible in Microsoft Exec 2000
If I am using sendmail in a simple macro, is there any code I can add to actually open Outlook?
Some users of the macro are pressing the macro button and do not have Outlook open so the email isn't sent until they eventually open Outlook!
Thanks in advance
Some users of the macro are pressing the macro button and do not have Outlook open so the email isn't sent until they eventually open Outlook!
Thanks in advance
Hi,
I would like to send SMS from a VBA macro to my mobile phone. Do anyone know how to do this?
I am ready to pay a cost per SMS if necessary.
(I asked the same question at another Excel forum without getting any reply.)
I would like to send SMS from a VBA macro to my mobile phone. Do anyone know how to do this?
I am ready to pay a cost per SMS if necessary.
(I asked the same question at another Excel forum without getting any reply.)
I'm having a problem in a workbook with several ActiveX command buttons. I had been using the form control buttons to run macros, but the boss wanted each button to have it's own, different color. So I removed the form control buttons and created new ActiveX command buttons. I got into the button properties and set the background colors. I added the _Click code to run the macros when the user clicked the buttons.
All of the buttons were working fine. Then I saved and closed the workbook and went to lunch. Now when I open the workbook, the buttons don't work! When I click them nothing happens. They appear frozen. They don't even seem to click. No error message. Nothing.
If I right-click the button in Design Mode and select Properties, I get sheet properties not the button properties. I can't seem to locate the command button properties any longer. I still see the button name "cmdButtonGetInfo" and "=EMBED("Forms.CommandButton.1","") in the name box and formula bar. The odd thing is if I create a new button it works fine until I save and close the file. When I reopen the file none of the buttons work.
It's like the buttons are being disabled when I close or open the file. Any suggestions?
All of the buttons were working fine. Then I saved and closed the workbook and went to lunch. Now when I open the workbook, the buttons don't work! When I click them nothing happens. They appear frozen. They don't even seem to click. No error message. Nothing.
If I right-click the button in Design Mode and select Properties, I get sheet properties not the button properties. I can't seem to locate the command button properties any longer. I still see the button name "cmdButtonGetInfo" and "=EMBED("Forms.CommandButton.1","") in the name box and formula bar. The odd thing is if I create a new button it works fine until I save and close the file. When I reopen the file none of the buttons work.
It's like the buttons are being disabled when I close or open the file. Any suggestions?
I did a search in here but didn't find an answer so here goes nothing...
I have a spreadsheet with data from A1 to H1 down to A275 to H275. I select all of it, Copy, go into the Sheet2 tab and select A1, Paste Special -> Transpose and it give me the following error message:
Quote:
The information cannot be pasted because the Copy area and the paste area are not the same size and shape. Try one of the following:
- Click a single cell, and then paste.
- Select a rectangle that's the same size and shape, and then paste.
For the life of me, I can't figure out why it's not working! I have done this many times with other spreadsheets. Has anyone ever experienced this? If so, were you able to resolve it and how?
Many Thanks,
Mike
I have a spreadsheet with data from A1 to H1 down to A275 to H275. I select all of it, Copy, go into the Sheet2 tab and select A1, Paste Special -> Transpose and it give me the following error message:
Quote:
The information cannot be pasted because the Copy area and the paste area are not the same size and shape. Try one of the following:
- Click a single cell, and then paste.
- Select a rectangle that's the same size and shape, and then paste.
For the life of me, I can't figure out why it's not working! I have done this many times with other spreadsheets. Has anyone ever experienced this? If so, were you able to resolve it and how?
Many Thanks,
Mike