Switch Between Read/write And Read Only

Hi all,

I've been getting this error on occasion recently.

- It's a shared document
- There is usually 10-12 people using the file at the same time

I've read on the Microsoft Help site that the issue is that somebody is accessing the file while another is trying to open it.

Is there a way, perhaps through VBA, that I can not allow a user to save while somebody else is opening the document? Other suggestions on how to avoid this error?

Thanks!

I did a bit of browsing on this problem. Found others suffering the same but haven't found any conclusive answer yet.

Every so often when I attempt to save a file, (including save as), Excel won'r let me. By won't let me I mean:

using Save doesn't appear to do anything using Save As doesn't either do anything, the dialog is not displayed and if I am doing via the File menu then the File menu is exited and the previous ribbon tab is displayed (i.ethe one I was on before clicking 'File') if I close the workbook I am prompted to save, close without saving or cancel. Clicking save just invokes the same msgbox again. I can't work out when it goes into this mode. Some days I can work without this problem, other days I encounter this 2 or 3 times.

The only thing I could suspect was I think this started around about the time I installed xlDennis' code library. I have uninstalled the addin and so far so good, but I cannot categorically say that this was the cause.

Anyone have any idea?

Cheers
Jon

Edit: I have read this: http://support.microsoft.com/kb/271513
Doesn't seem to cover the issue I describe

I have searched and read all the help files. I find the properties of
an object, I see how I can "lock", "size and move with cells" or "not
move with cells". No matter what I select, the object moves off the
screen, when the user, scrolls to the right of the spreadsheet.

Is there a way to lock the position, let's say , in the upper right
corner and have it stay there?

This would be quite useful for an EXIT button, that I have created,
that will close the program without saving (it's a read-only file.)

Thanks to all the wonderful people here that have been so helpful and
give us their valuable insight and time.

Jo

I was wondering if there is a way of getting a macro to open the "save as" dialogue box and then have it fill in the "file name" field.

I dont want it to actually make the save though as I want the user to have the chance to check that the save location is correct and the option to change the filename if required.

Cheers.

I cannot edit an excel spreadsheet that I had made. When I open up the file I can view everything but change nothing. The file is not saved as read-only. What can I do?

I have a file that became too big due to phantom bloat, unused range saved by Excel and all that kind of reasons. Thank to previous posts on that board tackling that issue, I was able to find how to proceed to reduce the file back to its normal size.
But I did so in a beta file (test file). The real file has become so big (103MB!) that Excel cannot even open it anymore! The file contains archive info that we do not have anywhere else.
Is there anyway then to open the file or to reduce its size without opening it (through magics...)? I just honestly don't know how to retrieve that info before deleting that file.

Thank you very much for your help.

I know this question has been asked a bajillion times, so I apologize for the redundancy.

I am working with an Excel spreadsheet and saving it as a .csv file in order to upload to an application that parses out the .csv data as transactions. The system requires .csv files, so this is how I need to save my doc (with this extension). I have been successful at preventing Excel from coverting that long number into scientific format. I have saved as a TXT file, pasted the longer number and it displays correctly. That is all good. But I have to save as a .csv. So if I do that, close the Excel window, and then open again (as the .csv file), the numbers are back to being displayed in scientific format. I have tried creating an Excel doc from scratch and entering text in Text format, to see if this created a cleaner file. But again, the second I save as .csv, close the window and then open that file up again, that dang scientific format is back.

Does anyone have any idea of how to work around this? Once I have successfully gotten the numbers to display as the long-chain number, how can I get them to "stick" so that they don't revert back to scientific format when I reopen the file?

Thanks so much for your help!

I'm trying to open a pdf file from within excel vba. I have tried using the followhyperlink method but adobe acrobat opens very briefly then immediately closes Code:

Sub OpenPDF()

'Dim pdf As String

    On Error Resume Next

    'pdf file to open
    pdf = "K:\PDF\mypdf.pdf"

    'open the pdf file
    ActiveWorkbook.FollowHyperlink pdf

End Sub

So then I tried to create an instance of acrobat by setting a reference to the acrobat object but I can't get this to work either!

The code I'm using is Code:

Sub OpenPDF()

    Dim pdf As AcroPDDoc
    Dim strPDF As String

    Set pdf = CreateObject("AcroExch.PDDoc")
    
    'pdf file to open
    strPDF = "K:\PDF\mypdf.pdf"

    'open the pdf file
    pdf.Open strPDF

End Sub

Any ideas what could be wrong with either approach?

Thank-you

I'm having a problem in a workbook with several ActiveX command buttons. I had been using the form control buttons to run macros, but the boss wanted each button to have it's own, different color. So I removed the form control buttons and created new ActiveX command buttons. I got into the button properties and set the background colors. I added the _Click code to run the macros when the user clicked the buttons.

All of the buttons were working fine. Then I saved and closed the workbook and went to lunch. Now when I open the workbook, the buttons don't work! When I click them nothing happens. They appear frozen. They don't even seem to click. No error message. Nothing.

If I right-click the button in Design Mode and select Properties, I get sheet properties not the button properties. I can't seem to locate the command button properties any longer. I still see the button name "cmdButtonGetInfo" and "=EMBED("Forms.CommandButton.1","") in the name box and formula bar. The odd thing is if I create a new button it works fine until I save and close the file. When I reopen the file none of the buttons work.

It's like the buttons are being disabled when I close or open the file. Any suggestions?

Hi all,

I've had a long search through your pages to see if this question has been answered before but having browsed through about 50 pages worth of threads I couldn't see anything, but if I am repeating prior information I do apologise.

I've written a macro that is relatively simple. It just takes some information in one format, rearranges it, adds some formatting and performs some calculations. Nothing incredibly fancy but it works fine on my computer.

Now, I need to share this macro with some other people, so basically I've just sent that excel file on to the people that need to use it. Should be fine and in most cases it is, however there is one user who although they can open the file, can't seem to get the macro to run properly.

It seems to get a small way through the macro but then stop with no error messages or any sign that it hasn't completed properly.

I have checked Macro Security level and that is the same as mine, Tools - Add-Ins is the same, In Visual Basic, Tools - References is the same as mine. It is the same Operating system and the same version of Excel.

I have even signed into this person's computer as myself (it's a big company network thing) and tried to run the macro and it works fine, so there is nothing wrong with the hardware.

I've googled and searched and tried everything I can think of but I'm no closer to solving this problem, so if anyone has read through this wall of text and can come up with a possible solution, that would be greatly appreciated to save me from tearing ALL my hair out!

Thanks very much for your time.

Using VBA, I am trying to retrieve the contents of the Source of a web page (the same as would appear if you right-clicked on the page and chose "View Source") into a variable so I can work on it in VBA (using InStr, etc.).

The problem is I can use code such as
strHTMLText = ie.Document.body.innerText
or
strHTMLText = ie.Document.body.outerText
to retrieve the code, but in either case only part, not all, of the source code is captured. I need ALL the code. Is there some kind of code such as ie.Document.body.allText or similar that would perform this function?

Much obliged!

I have workbook in which I want to save a specific worksheet to a new file with only the values saved - all data in this worksheet are references to cells on another worksheet, which is using VLOOKUP to pull data from a database.

Found the following code and it gets me close, but it copies the cell references, not the values. It also allows me to specify the file name from a cell reference.

I want the new workbook file to simply be saved, not opened, and a message box to display stating where the file was saved (will always be in the same location on the LAN).

What modifications do I make to this to get this to work per above requirements?

Sub CopyMe()
Dim SaveMeAs As String
SaveMeAs = Sheets("Sheet1").Range("B2").Text
Sheets("Sheet3").Copy
ActiveWorkbook.SaveAs Filename:="C:\My Documents\" & SaveMeAs
End Sub

How do I grant only specific people to be able to open, view, edit an excel file? I don't want anybody else besides these two people to be able to even open the file, so I'm not talking about password protecting to prohibit editing a file. I would assume I need to go to the properties, security settings but I'm not sure?

Hello,

I'm pretty new at VBA and was wondering if you could help me out on this:

I have created a VBA userform but will need to have it used by at least 5 users. My question is, can it be done with all users working at the same time and when saving their work all data entered will go to one master excel sheet? if yes, would you be kind enough to share the code?
MS Access is not an option for me so I was wondering if you could help me do this in excel.

thank you so much and would really appreciate to hear from anyone soon.

Hey guys,

I'm trying to write a macro which prints to PDF and saves the file name as the contents of a cell. I've been looking through all the posts currently on this forum to get something working. I'm using the following code -

Sub PrintPDF()
Filename = "C:\Documents and Settings\samb\My Documents\" & ActiveSheet.Range("Z1").Value
SendKeys Filename & "{ENTER}", False
ActiveWindow.SelectedSheets.PrintOut Copies:=1, ActivePrinter:= _
"Adobe PDF:", Collate:=True
End Sub

The macro prints to PDF, but then it stops at the Save As stage, where I have to manually enter the name of the file and click Save. I want the macro to automatically name the file with the contents of cell Z1. I then want it to then automatically press enter. Any ideas where I'm going wrong? Any help would be much appreciated!