Indirect Function To A Cell With A Hyperlink; Follow The Hyperlink

I would like the contents of a selected active cell to be displayed in a certain other cell, say R4. When another cell is selected and active, that cell's contents should be displayed.

I have an array of 9 columns and 20 rows with equity symbols and conditionally formatted to show the severity of price movement in either direction.

Instead of typing in the value of whatever cell a trader is looking at I would like for them to just be able to click on the cell and have that symbol copied into R4 so some detailed information can be displayed for them.

Can't find a thing about this on any forum or msdn.

Hope I'm explaining this at least somewhat clearly.

Thanks.

I'm using some basic code below in an on Workbook Open event to format cells with a value less then 2 and less than 1 with a particular color.

The code works, but it really slows my worksheet down when opening. Is there better way to write this? Thanks!

Code:

 
Dim myRange As Range
Dim cell As Range
Set myRange = Range("V6:V50000")
    For Each cell In myRange
    If cell.Value < 2 Then cell.Font.ColorIndex = 5
    If cell.Value < 1 Then cell.Font.ColorIndex = 3
    Next

Corporate edict.

I have a worksheet that is locked and protected now, except for cells in a certain collumn. I have named the cells in that column "MS96A".

If a user enters a date in a cell or range of cells anywhere in the column, the changed cells also need to be locked and protected (Once they enter a date, it is not allowed EVER to be changed again. Corporate requirement! *Shrug*).

What I am looking for is this. If the user selects that cell again, they will get the usual pop-up message, "The cell or chart that you are trying to change is protected..."

I think I am close, but I am getting an "End If without block If" error on the If Clause.


Sub Worksheet_Change(ByVal Target As Excel.Range)
Dim MRange As Range
Set MRange = Range("MS96A")
' If Not Intersect(Target, MRange) Is Nothing Then For Each cell In MRange Sheets("Sheet1").Unprotect Password:="temp"
cell.Interior.ColorIndex = 3
cell.Font.Color = vbBlack
Selection.Locked = True
Selection.FormulaHidden = False
Next cell
ActiveSheet.Protect Password:="temp", _
DrawingObjects:=False, _
Contents:=True, _
Scenarios:=False
ActiveSheet.EnableSelection = xlUnlockedCells
End Sub

Hi all,

I have some formulae in A1, is it possible for cell B1 to display the value only of A1 without the link to the formulae. I dont want to have to run a macro, or paste values, more of a formula that could be assigned to cell B1 so whenever A1 is changed, so is B1 automatically.

Thanks,

Pedro.

I would like to send an Excel file with hyperlinks of photo's attached to cells but when it is sent the recieving person cannot access the hyperlinks anymore. I am using 2007, I have tried to send the folder but that didn't seem to work. Any other way around this?

Hello,

I am new to using Excel and I am not very computer literate. I am looking for some help with a spreadsheet I am making. Here is the problem:

I have a column of 14 numbers in cells A1 to A14. If all of these values are less than 2%, I would like a "Pass" to display in cell B1. If any of these values are greater than 2% I would like a "Fail" to display in cell B1.

I have got a formula that works for a single cell but I can't figure out how to get it to apply to more than one cell. For example, I have entered =IF(A1<2,"Pass","Fail") in cell B1. Now if the value I enter in A1 is less than 2, it shows a "Pass", and if the value in A1 is greater than 2 it shows a "Fail" in cell B1. How can I get this to apply to all of the cells from A1 to A14?

If somebody could help me out that would be great.

Thanks,
Randy

I have cells in a column, some colored yellow, some not. I am trying to use
the SUMIF function to sum only the cells in the range that are colored. Can
this be done? Can I enter something in the "criteria" part of the formula
that can do this?

=SUMIF(D3:D13,"criteria",D3:D13)

I also tried to use the CELL function's color feature, but I couldn't get it
to work right. I don't know how to get Excel to recognize if a cell is
colored in a formula.
=CELL("color",cell)

It might just be that I don't know what this means in Help:

"color" --> 1 if the cell is formatted in color for negative values;
otherwise returns 0 (zero).

Can anyone help?

I am trying to automatically capture and record the date of a cell's last change in value (date stamp). I have an item price list and if a particular cell gets updated I want to automatically record the date of change of that cell. I realize that after I change cell A1 I could tab to cell B1 and enter Ctrl+; but if I have a hundred new prices to enter I don't want to do that (plus me or the data entry person might forget).

For instance,

A B
1 $32.17 8/17/08
2 $43.20 9/12/09

If I go in and update cell A1 to $33.98 today I would like cell B1 to read 2/16/10. But I don't want cell B2 to change.


Thanks

I was wondering if anyone could help me out please?!?!

I need to have a cell on Sheet2 display the TEXT from a cell on Sheet1, is his possible??

Example:

Sheet1, Cell A1 contains a clients name and I would like to have Sheet2, Sheet3, Sheet4 etc... Display that clients name in a cell of my choosing (could be a different cell on each Sheet) automatically after entering it once on Sheet1, cell A1.

I thought this was possible but I can't seem to figure it out. I haven't done any real Excel work in quite a long time but I thought I had done this before a long time ago!! Any help would be GREATLY appreciated!! Thanks in advance...

P.S. If I use autosum to do this it just displays the number 0, obviously, since it is trying to add numbers...

I uploaded a copy of the spreadsheet, What I would like to happen is have the text from Sheet1,D4 automatically be placed in Sheet2,A1 and Sheet3, B2. Hope this helps

-Aric

I have a co-worker's file that he is having trouble with. He is using Excel 2000 SP3. When copying a cell with a formula in it of "=D6+C6" and pasting it into the next cell down, it will display the same value in the cell as the calculated value from above, but has the correct formula displayed in the formula bar of "=D7+C7".

Example:
A1: 50
A2: 10
B1: 60
B2: 20

A3: Formula: =A1+A2 Displays: 60
Right click A3, Copy, right click B3, paste
A3 displays 60

When I click save, it will change the display value to 80.

I am trying this on his workstation and mine. Mine has Office 2010, so I think there might be an issue with the file itself.

Also, not just copy and paste. I can also just click the top cell after filling in the formula and then drag the bottom right of the cell downward and it will do the same of filling in the correct formula, but have the incorrect value.

I know that I could get him to just click save each time before really looking at the results, but that is just a band aid to the problem.

Any ideas how to fix this?

Hello all,

Until now I have been able to find all my answers through searches. As a VBA novice, it has been very helpful. I am stumped on this one, however. I am trying to autofill from the selected cell in Column C down. I would like it to stop at the last cell with data in Column B. This is the code I have so far:

Range("C2").Select
Selection.AutoFill Destination:=Range(Selection, Selection.End(xlDown))

This does the autofill, but doesn't stop at the last cell with data in Column B.

In the past I have use this code to acheive similar results:

Dim endRow As Long
endRow = Cells(Rows.Count, "B").End(xlUp).Row
Range("C2").AutoFill Destination:=Range("C2:C" & endRow)

The problem with this code is that I will not always be starting in "C2". I need code that uses whatever the selected cell is.

All help is appreciated. Thanks!

Hi was wondering if anyone can help.

I am trying to reference a cell on another worksheet, the cell is formatted to be a date. when i put in the following formula =Sheet2!A1 and i don't input a date into A1 on sheet 2 the cell containing the formula shows the date 00/01/1900, is there any way of stopping this showing, ideally the cell would be blank until I inputted a date into A1 on sheet 2

Any help would be very much appreciated

I have a workbook that has compliance dates in columns "F","G" and "H" from row 7. What I need is when the date in either column comes within 30 days to auto send an email, address in column "A", recipients name in column "B". and then place todays date in column 'P". ALso need to send a follow up email when either date comes within 7days and then place todays date in column "Q". If there is a date in column "P" then don't send email. If there is a date in column "Q" then don't send follow up. Can this be done without the users intervention and each time the workbook is opened.
Thanks in advance for any assistance.

Mick

I am a very advanced Excel user so this is a new one for me.

When I open any spreadsheet (new or already populated) the black box that normally frames the active cell is missing (showing which cell you have selected). Likewise when I 'select all' the sheet does not become shaded.

In addition:

Can not fill series
Can not change cell format (specifically to show Currency or Accounting w/$ symbol)

And I am sure there is much more that I have not found yet. I have not seen a single thread on this topic anywhere on the internet.

Help!

Greetings all,

How do I link cells so that I can make data entries into either cell? I believe this is called 2 way cell linking.

In short, I want to have a cell on one tab linked to a cell on another tab and be able to change the value of both cells by entering data either tab.