Removing Used Item From Dynamic Drop Down Menu |
Removing Used Item From Dynamic Drop Down Menu - Excel |
|
I have a dynamic list that needs to be validated in another sheet (same workbook) in three different ranges eg. (b3:b15) (j3:j15) and (p3:p15).
The dynamic list contains options that should not be used more than once.
I'm unable to figure out how to make the drop down list to remove any used items.
I would greatly appreciate any solution and thank you in advance!
Similar Topics
Perhaps a better solution is to use a workaround that relies on the HYPERLINK function to refer to whatever is selected in the drop-down list. For instance, if you have your data validation drop-down list in cell A1, then you might put the following formula in cell B1:
=HYPERLINK(A1, "Goto Link")
The solution directly above provides exactly what I am looking for
in the field where I write the formula, but it fails to hyperlink.
I have created a drop down list and linked each one of them to a
specific worksheet. When I select them individually they link to
appropriate worksheet. But when I select them in the drop down
list I receive the following error when I select the Hyperlink in
cell B1 as directed above.
"Cannot open the specified file"
Any thoughts?
Bob
I want to protect a cell that I have a drop down list in, but I still want the drop down list to work.
When I try to protect it, the user is not able to use the drop down list to select other items. I didn't see an option on the protect sheet area.
Thanks for any help.
Nick
My question I believe is easily solvable for you cracks of excel.
I have a worksheet with a list of rows (item#, date, price, etc). In the last column of this list I can put an x for some of the items.
On another worksheet or sheet, I need to autoamtically have a list of the items in the first list above, that have an X in the last columns.
I created an example on a worksheet attached just for you to understand.
I apreciate all the help I can get.
Thank you so much.
RG
BUT.......if I click in the cell and right click and chose "pick from list" the list will then appear.
Why is this happening? Why does the drop down list not appear when I click on the arrow but only work if I chose the "pick from list" ???
I need the drop down arrow to work
Per say here is what I am trying to do
If a certain "word" is used from the drop down list I want the background of
that cell to change its color to "green." And if later I change the "word" to
another from the drop down list, it will change it's color to a specified
color.
The drop down list that I use was created from cells that have the colors
already in the "word", but I do not know how to make the list show the colors
so it puts the word & color automatically in the drop down list to the cell
with the drop down (if that makes any sense).
If there is a way, please spell it out simple enough for me to understand,
as I don't know fully the capabilities of formulas or vba.
I have a long list of data validation. I was wondering if there is a way when I clik on the drop down menu and type the first letter, automatically Excel shows all list with that letter.
Right now, I have to click on the drop down menu and scroll manually until I reach that desired list.
Thanks.
it as a drop-down list, you can select a name from the drop-down and it's
corresponding value will be added to separate cell? Basically, I have survey
questions which have five possible responses: Excellent - Very Good - Good -
Fair - Poor. We want to assign a value to each, 5 for Excellent, 4 for Very
Good and so on, so that when a response is selected from a drop-down, it's
value appears in a separate cell (so that we can calculate a total and
average score from the selections).
Thanks
B
I would like a formula that would list all the items in row B that match the criteria in row A. the first cell with formula would list the first item, the second cell with the formula would list the next item, and so forth. Also, column B might have a duplicates that should be listed. Is this possible? I cannot manipulate the order of the original items (ie, filters) because this data is being used to derive other formulas.
I have 2 colombs of data.
AT the bottom of the first, I have created a drop down menu using the "data validation" feature in excel.
At the bottom of the second colomb, I have used an "IF" function that returns a result, which depends on what value is chosen from the drop down menu in colomb 1
The problem I have is that I want the TRUE result from the IF function to be another drop down menu, being the data in colomb 2.
How do you write an IF function where the TRUE result is a drop down menu??
I tried to create a drop down menu of colomb2 elsewhere in the spread sheet, and used that cells location as the TRUE value, but this didn't work either...
ANy suggestions??
Is there a way to have the Min and Max values adjusted dynamically for the Scale of the values being displayed ??
I know that I can use named ranges to display various sections of data -- month by month, or quarter by quarter, for example.
But when the value of these ranges vary greatly from section to section I end of having to manually go and adjust the Min and Max values of the chart scale.
For example, if I was looking at a graph of the S&P 500's prices last November, a Min and Max range of 750 to 1200 would be fine. But if I had a dynamic range established and scrolled over to view the S&P 500's prices for this past February, I would need a Min and Max range of around 650 to 850.
Is there a way to have these Min & Max values adjust automatically depending on the values being displayed ??
Thanks
StanSz
We have to submit things to a certain regulatory body and we usually enter tasks in as soon as they come, do the submission, and then keep a record of that submission.
So, I have a workbook with two sheets, one is "TO DO", the other is "ARCHIVE". Both sheets have the same columns and everything. I am looking for a macro that will automatically cut a (row) from the TO DO sheet and paste it in into the ARCHIVE sheet once it is done, then delete the cut row from the TO DO list so it stays topped up.
The trigger for archiving is the columns M and N which are titled "Complete ?" and each has a validation drop down that says "YES". When both cells in columns M and N have the YES in them, I would like the macro to make the above mentioned actions.
I ran a search on the forums and found something similar, but not quite what I was looking for.
Any help?
How do I do this?
I have the below code which deletes all items from a listbox and my excel sheet which is the source for populating that listbox. I am using a option button style for my listbox and the selection style as single .i.e. you can select only one item at one go in the lisbox. I want my macro to delete the selected item from my worksheet .i.e. it's entire row so that it doesn't reflect in my lisbox any more. Below is my code :
Code:
Private Sub CommandButton2_Click() 'REMOVE SELECTION Dim I As Long With ListBox1 For I = .ListCount - 1 To 0 Step -1 If .Selected(I) Then .RemoveItem I Sheets("URL List").Rows(I + 2).EntireRow.Delete End If Next I End With End Sub
Thanks a lot for your help in advance.
I have a spreadsheet with some cells setup with a drop-down list containing
Y, N or N/A
This is being used on a TabletPC but if I make a mistake or need to change
back to a blank field I have to invoke the soft keyboard, activate the cell
and hit backspace then close the soft keyboard - quite a long-winded
procedure just to change an incorrect choice!
What I would like to do is add a blank to the list so if I have to revert
back to a blank I can just use the stylus to choose a blank from the chooser
list.
How do I add the option of inputting a blank from the Data Validation List
bearing in mind I am using the Data Validation Source box for entering my
choices directly and not specifying a range of cells?
I have tried adding "" and even a space to no avail.
Although not a betting man I would wager there is a simple 'fix' for this
but things are only simple if you know how in the first instance! ;^)
--
Thanks & regards,
-pp-
I need to look up data from a cell on one Excel sheet, compare it to a list on a 2nd sheet and when they equal, take a value from a different column on the 2nd sheet and drop it back on the 1st sheet. Since that's a horrible explanation, let me try explaining it this way:
Sheet 1
Column A has a long list of code type 1s
Column E has a long list of code type 2s
Sheet 2
Cell C2 has code 1
Cell E2 needs code 2
I know it should take an index/match function, but nothing I try is working. What I'm trying is the following formula in Cell E2 of sheet 2:
=INDEX('Sheet 1'!A:A,MATCH(C2,'Sheet 1"!E:E,0),5)
But all I get is no result. What's driving me bonkers is that if I copy everything over to a single sheet, that formula works fine.
Firstly i haven't used excel to a great extent since my college days. So i'm having to re-learn 99.9% of everything i once new...
I am volunteering for a non profit organization and trying to create a reservation system for the rooms that they have - kind of like hotel software, but in excel (i did a similiar thing in college but for plane seats)
Please find it attached.
What i need it to do:
Copy all of the info from the main page to the guest lit (a new row each time).
From the guest list to the Gannt chart - i did a few tutorials on dynamic gantt charts using conditional formatting but cannot get them to work when based on data on a different worksheet.
Finaly is there a way to check for availabilty on any given date?
if just someone could point me in the right direction, i would be appreciate it so much words can't express!!!
Best Regards,
Jamie
P.S for the calender drop down on the main page, i'm using 'microsoft time & date picker 6.0)
http://www.2shared.com/file/6521961/...ibsV05b32.html - pop ups on this site
http://www.easy-share.com/1906519167/RibsV0.5b3.2.xlsm - same file, better website
James
eliminate from the sheet the filtered-out rows. So when I refilter the sheet
with new items to get rid of, the old filtered items come back. I've tried
copying the range to another file, but I always get all the old data in the
new file.
I want F3 to turn yellow if someone selects "Yes" from a drop down list in cell E3, then F3 has no fill once data is entered into it. And F3 turns Black if E3= no selected from the list. Or F3 turns red if E3 contains "TBC"
so in summary,
if E3="Yes", then F3 conditional format to Yellow until data is entered in it.
if E3="No", then F3 conditional format to Black
if E3="TBC", then E3 & F3 conditional format to Red until E3 is changed to
"Yes" or "No" at a later time.
Thanks in Advance for the help
Mutley13