Editing And Saving In Notepad While Controlling Macro In Excel

I know this question has been asked a bajillion times, so I apologize for the redundancy.

I am working with an Excel spreadsheet and saving it as a .csv file in order to upload to an application that parses out the .csv data as transactions. The system requires .csv files, so this is how I need to save my doc (with this extension). I have been successful at preventing Excel from coverting that long number into scientific format. I have saved as a TXT file, pasted the longer number and it displays correctly. That is all good. But I have to save as a .csv. So if I do that, close the Excel window, and then open again (as the .csv file), the numbers are back to being displayed in scientific format. I have tried creating an Excel doc from scratch and entering text in Text format, to see if this created a cleaner file. But again, the second I save as .csv, close the window and then open that file up again, that dang scientific format is back.

Does anyone have any idea of how to work around this? Once I have successfully gotten the numbers to display as the long-chain number, how can I get them to "stick" so that they don't revert back to scientific format when I reopen the file?

Thanks so much for your help!

I am using the code below to disable the save function very successafully. However, is there a work around to allow a macro to save?
----------------------------------------------------------------------
Private Sub Workbook_BeforeSave(ByVal SaveAsUI As Boolean, Cancel As Boolean)

'this disables the save function on the XLS

MsgBox "****Save is Disabled****"
' Following line will prevent all saving
Cancel = True
' Following line will prevent the Save As Dialog box from showing
If SaveAsUI Then SaveAsUI = False
End Sub

I have a co-worker's file that he is having trouble with. He is using Excel 2000 SP3. When copying a cell with a formula in it of "=D6+C6" and pasting it into the next cell down, it will display the same value in the cell as the calculated value from above, but has the correct formula displayed in the formula bar of "=D7+C7".

Example:
A1: 50
A2: 10
B1: 60
B2: 20

A3: Formula: =A1+A2 Displays: 60
Right click A3, Copy, right click B3, paste
A3 displays 60

When I click save, it will change the display value to 80.

I am trying this on his workstation and mine. Mine has Office 2010, so I think there might be an issue with the file itself.

Also, not just copy and paste. I can also just click the top cell after filling in the formula and then drag the bottom right of the cell downward and it will do the same of filling in the correct formula, but have the incorrect value.

I know that I could get him to just click save each time before really looking at the results, but that is just a band aid to the problem.

Any ideas how to fix this?

ok. vba newbie...

i want to select and entire row in excel in sheet 1, and paste the entire row into sheet 2. (2 different worksheets in the same workbook)

what code do i need to do this?

Hello everyone!!!!

Here is my situation. I have been trying to learn macros but have not made one yet. Need your help. Here at work, I have some incompentant computer workers who claim they KNOW MS sooo well and have certificates etc... *COUGH COUGH* ya ok... LMAO

We have a "shared" work book we all work in. It's nothing fancy, just use it as a PO Book but since it is shared some people continue to not save before they add in more work so that they see a "refreshed" copy of the workbook before they start writing in cells that already contain information.

How to I create a macro button at the top of the page that is literally a SAVE button.. instead of them saving by going to File - Save or cntrl+s ??? I just thought that MAYBE having a big button in their face will remind them.

Secondly as back up I was wondering if you can create a macro to do a refresh of everyones screens automatically - say every 2 or 5 mins??? I don't mean a save... but a refresh so the screen actually updates in front of you. (although I will keep this little piece of magic out of their knowledge so they don't rely on it, just though it would be a secondary back up to helping eliminate these mishaps cause we are loosing alot of information by people saving overtop of other peoples work and not caring.)

Thanks so much!!!!! Muchly appriciated.

I need to find data in two different formats within a column

Examples

Webb Christopher


Greer Nancy

I need to find cells with text that have more than one space between the first and last names; and cells with text that have only one space between the first and last names.

I am fairly new to excel. I can find the space after the first word but cannot tell it to find ones that say have a space then another string of text.

Thank you for your help!

Arcangelo from Italy asks: How can I write an Excel VBA macro to save the current Excel file with a filename derived from cell A1?
This macro is amazingly straight-forward:

Public Sub SaveAsA1()
ThisFile = Range("A1").Value
ActiveWorkbook.SaveAs Filename:=ThisFile
End Sub
I'm totally lost on this "amazingly straight-forward" macro!!!! Could someone help if I tell you the SAVE location? It's T:\COMMISSIONING\IJT\TIMELOG project\Staff#1. I'm just not certain what value I'm replacing in the Macro above.

Any help appreciated..

I did a bit of browsing on this problem. Found others suffering the same but haven't found any conclusive answer yet.

Every so often when I attempt to save a file, (including save as), Excel won'r let me. By won't let me I mean:

using Save doesn't appear to do anything using Save As doesn't either do anything, the dialog is not displayed and if I am doing via the File menu then the File menu is exited and the previous ribbon tab is displayed (i.ethe one I was on before clicking 'File') if I close the workbook I am prompted to save, close without saving or cancel. Clicking save just invokes the same msgbox again. I can't work out when it goes into this mode. Some days I can work without this problem, other days I encounter this 2 or 3 times.

The only thing I could suspect was I think this started around about the time I installed xlDennis' code library. I have uninstalled the addin and so far so good, but I cannot categorically say that this was the cause.

Anyone have any idea?

Cheers
Jon

Edit: I have read this: http://support.microsoft.com/kb/271513
Doesn't seem to cover the issue I describe

Hi all,

I've had a long search through your pages to see if this question has been answered before but having browsed through about 50 pages worth of threads I couldn't see anything, but if I am repeating prior information I do apologise.

I've written a macro that is relatively simple. It just takes some information in one format, rearranges it, adds some formatting and performs some calculations. Nothing incredibly fancy but it works fine on my computer.

Now, I need to share this macro with some other people, so basically I've just sent that excel file on to the people that need to use it. Should be fine and in most cases it is, however there is one user who although they can open the file, can't seem to get the macro to run properly.

It seems to get a small way through the macro but then stop with no error messages or any sign that it hasn't completed properly.

I have checked Macro Security level and that is the same as mine, Tools - Add-Ins is the same, In Visual Basic, Tools - References is the same as mine. It is the same Operating system and the same version of Excel.

I have even signed into this person's computer as myself (it's a big company network thing) and tried to run the macro and it works fine, so there is nothing wrong with the hardware.

I've googled and searched and tried everything I can think of but I'm no closer to solving this problem, so if anyone has read through this wall of text and can come up with a possible solution, that would be greatly appreciated to save me from tearing ALL my hair out!

Thanks very much for your time.

I was wondering if there is a way of getting a macro to open the "save as" dialogue box and then have it fill in the "file name" field.

I dont want it to actually make the save though as I want the user to have the chance to check that the save location is correct and the option to change the filename if required.

Cheers.

We have a large (4,000+ rows) excel worksheet from a prior employee that I
would like to be able to use, but it is password protected and no one has the
password. Is there a way to copy or save it as a different file that will
not copy the password protection? It would save me a couple days of work if
it is possible.
Thanks

file locked for editing , can I kick the other user out if its my file?

I have made an excel file where other people have to go in and update it. This process takes 2 secs but some people forget and stay in it over lunch etc causing a great annoyance.
Is there anyway I can "kick" them out my file? Im not concerned if they lose any data they've entered as I'm sure this will help them get the message to get out the file quicker..
Its really doing my head in... pls help

Hi,

I'd like help in creating a macro that deletes an entire row that has emtpy cells in col B, C & D in the same row.
So for example if I have empty cells in b3,c3 & d3 I'd like the row deleted.

I've used the code below for just column B but I need to include column C & D as well. I tried putting Columns("B:D") but it deletes everything.

Code:

Sub Step4()
   On Error Resume Next
   Columns("B:B").SpecialCells(xlCellTypeBlanks).EntireRow.Delete
End Sub

I'm sure it's something simple... like me !

Any help much appreciated

Wrightie

We have a number of Excel users in our office who cannot copy and paste
between Excel workbooks. They can copy and paste between worksheets. When
you highlight the section to copy and then go to the new workbook both the
paste
and paste special are "grayed out". This is true whether you right-click the
mouse, go to the edit menu, or use control keys. This occurs with any data
type and the most simple workbooks. I have seen some suggestions here but
none have worked for this particular problem. I have reset the menus and
renamed the .xlb files and neither helps. You can open the clipboard and the
paste will work, but there is no paste special option. Any help would be
greatly appreciated. Thanks!

I have a template that automatically populates the date field with the
current date when opened, using today(). Users then Save As to have an
archive copy of their spreadsheet. However, when they go back to access
their saved sheet, the date changes from the created date to the current
date. How do I stop this in Excel?

I know that Word lets you do this by changing the code from {DATE} to
{CREATEDATE}, but I can't find a similar setting in Excel.

Please help and thank you!