Deleting Images When Deleting Entire Row |
Deleting Images When Deleting Entire Row - Excel |
|
Folks,
I have a simple spreadsheet with product size, quantity, description and visual (containing a small image).
I'm looking for code that will delete images completely when deleting the entire row in which they reside. At the moment I have images set to "Move and size with cells", however this deposits the re-sized image over the cell lines above.
Is there a simply way to automatically delete an image from the worksheet when deleting the corresponding row?
Thanks in advance,
gor
I have a simple spreadsheet with product size, quantity, description and visual (containing a small image).
I'm looking for code that will delete images completely when deleting the entire row in which they reside. At the moment I have images set to "Move and size with cells", however this deposits the re-sized image over the cell lines above.
Is there a simply way to automatically delete an image from the worksheet when deleting the corresponding row?
Thanks in advance,
gor
Excel VBA Course - From Beginner to Expert
200+ Video Lessons 50+ Hours of Instruction 200+ Excel Guides
Become a master of VBA and Macros in Excel and learn how to automate all of your tasks in Excel with this online course. (No VBA experience required.)
(80% Discount Ends Soon!)
Similar Topics
Still learning VBA - I am trying to delete an entire row based on a condition in one cell in the row. Typically I would just filter on that value and delete the rows, but I am not sure if that is a possibility in VBA code. Can you provide the code if not too complex.
Select Cell A1 if value is 100 delete entire row, else skip to next row. Then loop through each row in the spreadsheet till all rows with selected cell equal to 100 are deleted.
Select Cell A1 if value is 100 delete entire row, else skip to next row. Then loop through each row in the spreadsheet till all rows with selected cell equal to 100 are deleted.
I have a file that became too big due to phantom bloat, unused range saved by Excel and all that kind of reasons. Thank to previous posts on that board tackling that issue, I was able to find how to proceed to reduce the file back to its normal size.
But I did so in a beta file (test file). The real file has become so big (103MB!) that Excel cannot even open it anymore! The file contains archive info that we do not have anywhere else.
Is there anyway then to open the file or to reduce its size without opening it (through magics...)? I just honestly don't know how to retrieve that info before deleting that file.
Thank you very much for your help.
But I did so in a beta file (test file). The real file has become so big (103MB!) that Excel cannot even open it anymore! The file contains archive info that we do not have anywhere else.
Is there anyway then to open the file or to reduce its size without opening it (through magics...)? I just honestly don't know how to retrieve that info before deleting that file.
Thank you very much for your help.
Hi,
I'd like help in creating a macro that deletes an entire row that has emtpy cells in col B, C & D in the same row.
So for example if I have empty cells in b3,c3 & d3 I'd like the row deleted.
I've used the code below for just column B but I need to include column C & D as well. I tried putting Columns("B:D") but it deletes everything.
Code:
I'm sure it's something simple... like me !
Any help much appreciated
Wrightie
I'd like help in creating a macro that deletes an entire row that has emtpy cells in col B, C & D in the same row.
So for example if I have empty cells in b3,c3 & d3 I'd like the row deleted.
I've used the code below for just column B but I need to include column C & D as well. I tried putting Columns("B:D") but it deletes everything.
Code:
Sub Step4()
On Error Resume Next
Columns("B:B").SpecialCells(xlCellTypeBlanks).EntireRow.Delete
End Sub
I'm sure it's something simple... like me !
Any help much appreciated
Wrightie
Imagine a whole box of lengths of aluminium sections for making windows.
To make those windows I need to cut these lengths into smaller sizes.
I need to do this economically.
How can I use Excel to help me make this a reality.
Firstly you would take a big size out of it and then another size out of the offcut piece.
And then another size out of the offcut left over.
I need to know how many full stock lengths (6500) long it will take to cut all the pieces listed above.
Is it possible?
You need to take into account the quantity of each size and fit it all in together for the most optimal outcome.
See attached example of possible layout.
To make those windows I need to cut these lengths into smaller sizes.
I need to do this economically.
How can I use Excel to help me make this a reality.
Firstly you would take a big size out of it and then another size out of the offcut piece.
And then another size out of the offcut left over.
I need to know how many full stock lengths (6500) long it will take to cut all the pieces listed above.
Is it possible?
You need to take into account the quantity of each size and fit it all in together for the most optimal outcome.
See attached example of possible layout.
Hi All,
I have the below code which deletes all items from a listbox and my excel sheet which is the source for populating that listbox. I am using a option button style for my listbox and the selection style as single .i.e. you can select only one item at one go in the lisbox. I want my macro to delete the selected item from my worksheet .i.e. it's entire row so that it doesn't reflect in my lisbox any more. Below is my code :
Code:
Thanks a lot for your help in advance.
I have the below code which deletes all items from a listbox and my excel sheet which is the source for populating that listbox. I am using a option button style for my listbox and the selection style as single .i.e. you can select only one item at one go in the lisbox. I want my macro to delete the selected item from my worksheet .i.e. it's entire row so that it doesn't reflect in my lisbox any more. Below is my code :
Code:
Private Sub CommandButton2_Click()
'REMOVE SELECTION
Dim I As Long
With ListBox1
For I = .ListCount - 1 To 0 Step -1
If .Selected(I) Then
.RemoveItem I
Sheets("URL List").Rows(I + 2).EntireRow.Delete
End If
Next I
End With
End Sub
Thanks a lot for your help in advance.
Hello, I am pretty new to excel programming/messing around so I'll refer to those who are much wiser than I am. I am trying to set up a form for work, in this form I want to have a page with a bunch of cells pre-sized. What I want to do is when I insert a picture from a job site, that when this picture gets inserted, it will automatically resize to fit within the cell. I don't have time to manually resize dozens of pictures and if I could get this to work it would be awesome! I tried to search for an answer using the search function, but I kept getting a fatal error about allowable memory? Thanks in advance for you help!
Hi,
I need the necessity do delete a sequence of sheets in my workbook.
If I use this code:
With ActiveWorkbook
If .Worksheets.Count >= 5 Then
For n = 5 To .Worksheets.Count
Worksheets(n).Delete
Next n
End If
End With
I receive a confirmation message box with this message:
"Data may exist in the sheet(s) selected for deletion. To permanently delete the data, press Delete" [DELETE] [CANCEL]
I wish to delete all sheets without receiving any message.
Is it possible?
Many thanks in advance for your kind support.
Regards,
Giovanni
I need the necessity do delete a sequence of sheets in my workbook.
If I use this code:
With ActiveWorkbook
If .Worksheets.Count >= 5 Then
For n = 5 To .Worksheets.Count
Worksheets(n).Delete
Next n
End If
End With
I receive a confirmation message box with this message:
"Data may exist in the sheet(s) selected for deletion. To permanently delete the data, press Delete" [DELETE] [CANCEL]
I wish to delete all sheets without receiving any message.
Is it possible?
Many thanks in advance for your kind support.
Regards,
Giovanni
Hi,
how do I select (in VBA) all the rows that were filtered out by autofilter (using VBA code) and delete them leaving just header. I just can't figure out how to select entire rows when the data is filtered...
Thanks for your hints!
how do I select (in VBA) all the rows that were filtered out by autofilter (using VBA code) and delete them leaving just header. I just can't figure out how to select entire rows when the data is filtered...
Thanks for your hints!
I run a small business. I want to start keeping track of inventory using a barcode system.
I know Excel "ok", but I don't know programming.'
I'd like to be able to do something very simple (for now)...
For example...if I had PRODUCT / CODE / INV VALUE
A - CODE A - 5
B - CODE B - 11
C - CODE C - 14
I would want to be able to click a button (or scan a code for) : ADD +1 or REMOVE -1
...then scan the barcode on the product (A) and have it add or remove one, respectively. So, if the row for A is:
A - CODE A - 5
I choose "ADD" (with a button or scan code), then scan the barcode, and the spreadsheet automatically finds the code in the sheet, and changes the corresponding inventory value:
A - CODE A - 6
Does that make sense? How might I go about doing that?
I know Excel "ok", but I don't know programming.'
I'd like to be able to do something very simple (for now)...
For example...if I had PRODUCT / CODE / INV VALUE
A - CODE A - 5
B - CODE B - 11
C - CODE C - 14
I would want to be able to click a button (or scan a code for) : ADD +1 or REMOVE -1
...then scan the barcode on the product (A) and have it add or remove one, respectively. So, if the row for A is:
A - CODE A - 5
I choose "ADD" (with a button or scan code), then scan the barcode, and the spreadsheet automatically finds the code in the sheet, and changes the corresponding inventory value:
A - CODE A - 6
Does that make sense? How might I go about doing that?
I have a workbook that has recently changed on me and is causing a lot of grief. I have a lot of named ranges that the scope of the named range has changed to a new sheet. This is creating a lot of problems! Is there any way to manually change the scope of a named range? without deleting the nmaed range and recreating it?
I have an image or picture within a worksheet.
I want to be able to reference it from a cell so that depending on a
validation list a different picture is shown.
Is this possible in Microsoft Exec 2000
I want to be able to reference it from a cell so that depending on a
validation list a different picture is shown.
Is this possible in Microsoft Exec 2000
Sorry for the question. Normally I find answers to my excel questions by going through the help tab or by searching on Google. However, I don't even know what question to ask on this one!?!
Basically I have created a spreadsheet with several columns, but I have one column that lists the shirt size (YS, YM, YL, AS, AM, AL, XL, 2X, 3X) of each person. Is there a formula that I can create that will tabulate the number of sizes (i.e. AS=2, AM=7, etc.)?
In previous years I made a column for each size, and simply placed a "1" in the correct column, and had excel just add the 1's from each column. However, that takes more time and space. I was hoping to streamline it this time around.
Thanks for taking the time to read this post. Any help would be appreciated! Thanks, doug
Basically I have created a spreadsheet with several columns, but I have one column that lists the shirt size (YS, YM, YL, AS, AM, AL, XL, 2X, 3X) of each person. Is there a formula that I can create that will tabulate the number of sizes (i.e. AS=2, AM=7, etc.)?
In previous years I made a column for each size, and simply placed a "1" in the correct column, and had excel just add the 1's from each column. However, that takes more time and space. I was hoping to streamline it this time around.
Thanks for taking the time to read this post. Any help would be appreciated! Thanks, doug
ok. vba newbie...
i want to select and entire row in excel in sheet 1, and paste the entire row into sheet 2. (2 different worksheets in the same workbook)
what code do i need to do this?
i want to select and entire row in excel in sheet 1, and paste the entire row into sheet 2. (2 different worksheets in the same workbook)
what code do i need to do this?
Hi,
I am entering lots of family history data into a spreadsheet. At the simplest I have columns (in cells A1 B1 C1) the headings, Surname, Forename, Year. Right now, I enter in cells A2 B2 and C2 say: Smith <Tab> John <Tab> 1555 <Enter, move mouse to the A column in the next row down). What I want to happen is when I have entered the last data in a row and pressed <Enter> I move automatically to the A-column in the next row down.
Is this possible?
Regards and a Merry Christmas to all
Wibs
I am entering lots of family history data into a spreadsheet. At the simplest I have columns (in cells A1 B1 C1) the headings, Surname, Forename, Year. Right now, I enter in cells A2 B2 and C2 say: Smith <Tab> John <Tab> 1555 <Enter, move mouse to the A column in the next row down). What I want to happen is when I have entered the last data in a row and pressed <Enter> I move automatically to the A-column in the next row down.
Is this possible?
Regards and a Merry Christmas to all
Wibs
I have searched and read all the help files. I find the properties of
an object, I see how I can "lock", "size and move with cells" or "not
move with cells". No matter what I select, the object moves off the
screen, when the user, scrolls to the right of the spreadsheet.
Is there a way to lock the position, let's say , in the upper right
corner and have it stay there?
This would be quite useful for an EXIT button, that I have created,
that will close the program without saving (it's a read-only file.)
Thanks to all the wonderful people here that have been so helpful and
give us their valuable insight and time.
Jo
an object, I see how I can "lock", "size and move with cells" or "not
move with cells". No matter what I select, the object moves off the
screen, when the user, scrolls to the right of the spreadsheet.
Is there a way to lock the position, let's say , in the upper right
corner and have it stay there?
This would be quite useful for an EXIT button, that I have created,
that will close the program without saving (it's a read-only file.)
Thanks to all the wonderful people here that have been so helpful and
give us their valuable insight and time.
Jo
Hi Everybody,
First post on the forum, have only recently joined and im hoping that someone can help me before my head explodes!
I am trying to prepare a simple Material Quantity List for some Steel materials.
The materials are all in specific sizes.
What i want to do is, as i input the length, width and height of the structure in the spreadsheet, the Material Quantity List will generate the quantity of each piece of material i will need.
Does anybody know of a formula for this. I have been trying to use the IF function and getting absolutely nowhere, all suggestions will be highly appreciated!!
First post on the forum, have only recently joined and im hoping that someone can help me before my head explodes!
I am trying to prepare a simple Material Quantity List for some Steel materials.
The materials are all in specific sizes.
What i want to do is, as i input the length, width and height of the structure in the spreadsheet, the Material Quantity List will generate the quantity of each piece of material i will need.
Does anybody know of a formula for this. I have been trying to use the IF function and getting absolutely nowhere, all suggestions will be highly appreciated!!
Also, I cannot move the Pivot Table from the new Worksheet it is created in, to my existing Worksheet.
I am running Excel 2011 for Mac.
I have a Worksheet with a small amount of data, and when I click the Pivot Table button it automatically creates the Pivot Table in a new Worksheet. The Pivot Table data is fine, but I want it to display alongside the source data.
I've tried using the Move Pivot Table option and choosing to Create Pivot Table in Existing Worksheet and choosing a source cell alongside my current data, but nothing appears. Also, I checked in Edit menu and found that the Pivot Table appears to have not even been created/moved because there is no option to undo it.
Appreciate any help, let me know if you have any further questions.
Hunter
I am running Excel 2011 for Mac.
I have a Worksheet with a small amount of data, and when I click the Pivot Table button it automatically creates the Pivot Table in a new Worksheet. The Pivot Table data is fine, but I want it to display alongside the source data.
I've tried using the Move Pivot Table option and choosing to Create Pivot Table in Existing Worksheet and choosing a source cell alongside my current data, but nothing appears. Also, I checked in Edit menu and found that the Pivot Table appears to have not even been created/moved because there is no option to undo it.
Appreciate any help, let me know if you have any further questions.
Hunter
Hi folks,
Hoping someone can help me quickly as I'm pulling my hair out and have a deadline getting too close.
Been trailing the net and this board but can't work out how to do a simple variance.
How do I work out the difference between two numbers - including negatives.
If the numbers are all positive, it's fine as it's simply a case of A - B = C which is your difference. However, that doesn't work if B is negative.
I need a formula that would give the following:
First Number / Second Number / Difference
1 / 5 / 4
1 / -5 / -6
-1 / 5 / 6
-1 / -5 / -4
-5 / -1 / 4
Hopefully there's a simple function I've been missing.
Thanks in advance, R
Hoping someone can help me quickly as I'm pulling my hair out and have a deadline getting too close.
Been trailing the net and this board but can't work out how to do a simple variance.
How do I work out the difference between two numbers - including negatives.
If the numbers are all positive, it's fine as it's simply a case of A - B = C which is your difference. However, that doesn't work if B is negative.
I need a formula that would give the following:
First Number / Second Number / Difference
1 / 5 / 4
1 / -5 / -6
-1 / 5 / 6
-1 / -5 / -4
-5 / -1 / 4
Hopefully there's a simple function I've been missing.
Thanks in advance, R
I have a textbox in my userform where anything typed in the box is entered into cell A2 in my worksheet. However, multiple lines of text are not properly displayed in my worksheet. I have enabled MultiLine and EnterKeyBehaviour in the properties window of the textbox so I can type multiple lines in my textbox. The problem is that when I press the button to enter the text from my txtbox to cell A2, the cell doesn't actually display the text in separate lines. It just places a square symbol in the place that enter should have been pressed and the text should have been split into separate lines.
How can I get the separate lines of text in my textbox to be properly displayed in a cell? Thanks for your help in advance..
How can I get the separate lines of text in my textbox to be properly displayed in a cell? Thanks for your help in advance..
I did a search in here but didn't find an answer so here goes nothing...
I have a spreadsheet with data from A1 to H1 down to A275 to H275. I select all of it, Copy, go into the Sheet2 tab and select A1, Paste Special -> Transpose and it give me the following error message:
Quote:
The information cannot be pasted because the Copy area and the paste area are not the same size and shape. Try one of the following:
- Click a single cell, and then paste.
- Select a rectangle that's the same size and shape, and then paste.
For the life of me, I can't figure out why it's not working! I have done this many times with other spreadsheets. Has anyone ever experienced this? If so, were you able to resolve it and how?
Many Thanks,
Mike
I have a spreadsheet with data from A1 to H1 down to A275 to H275. I select all of it, Copy, go into the Sheet2 tab and select A1, Paste Special -> Transpose and it give me the following error message:
Quote:
The information cannot be pasted because the Copy area and the paste area are not the same size and shape. Try one of the following:
- Click a single cell, and then paste.
- Select a rectangle that's the same size and shape, and then paste.
For the life of me, I can't figure out why it's not working! I have done this many times with other spreadsheets. Has anyone ever experienced this? If so, were you able to resolve it and how?
Many Thanks,
Mike