Excel VBA Course
Excel VBA Course - From Beginner to Expert

200+ Video Lessons
50+ Hours of Video
200+ Excel Guides

Become a master of VBA and Macros in Excel and learn how to automate all of your tasks in Excel with this online course. (No VBA experience required.)

View Course

(80% Discount Ends Soon!)

Close Window (X)   
Excel VBA Course
[80% Discount] Excel VBA Course - From Beginner to Expert

200+ Video Lessons
50+ Hours of Video
200+ Excel Guides

Become a master of VBA and Macros in Excel and learn how to automate all of your tasks in Excel with this online course. (No VBA experience required.)

View Course

(80% Discount Ends Today!)

Open Password Protected Excel Using Vba Automatically

i am trying to do a coding which automatically open password protected file.
Workbook.xls is password protected & the password is "password".

when i run the code, still there's a pop up asking for the password.

Code:

Sub OpenBookTest()
Dim myFile As String
Dim myPath As String
myPath = "C:\My Documents"
myFile = "My Workbook.xls"
Workbooks.Open myPath & "\" & myFile, password:="password"
End Sub





Excel VBA Course
Excel VBA Course - From Beginner to Expert

200+ Video Lessons 50+ Hours of Instruction 200+ Excel Guides

Become a master of VBA and Macros in Excel and learn how to automate all of your tasks in Excel with this online course. (No VBA experience required.)

(80% Discount Ends Soon!)

View Course




Similar Topics







Hi

I need to open a password protected workbook using VBA.

I've tried the code below but I still get prompted for a password.

Code:

Workbooks.Open Filename:="\\HOME\Working\Report.xls" _
        , Password:="xxxx"


How do I get it to open automatically???


We have a large (4,000+ rows) excel worksheet from a prior employee that I
would like to be able to use, but it is password protected and no one has the
password. Is there a way to copy or save it as a different file that will
not copy the password protection? It would save me a couple days of work if
it is possible.
Thanks



Hey guys,

I have an excel file that is password protected. I have opened it as read-only.. Is there any way to unlock it & do it modifiable when I already opened it as read only (of course without having to close it & re-open it and enter password lol)

Thanks,


I have found similar posts on the forum, but nothing without use of a userform.

I have the following code:

Code:

 
Sub Development()
    Pass = InputBox("Please enter development password", "Password")
    If Pass = "XYZ" Then
        UnhideAll
    Else: MsgBox ("Password incorrect, please try again")
    End If
End Sub


This works, but I want to hide the text as it is entered.
Is there a way I can enter this as a property? i.e. inputbox.text.property = ... or something?? I've tried what seems intuitive, but nothing works.

Help!


Is there a way to lets say go to www.gmail.com and automatically have VBA fill in the user name and password ? I am trying to automate login for my co workers to a certain site. Just havent been able to find out how. PLZ HELP !!


Thnx for your help man. Now I have another situation.

I have the following:

1. Login form containing username and password fields.
2. Data entry form

I want to do the following:

1. Coding for username and password fields, which, If the login is successful, takes me to DATA Entry Form, Otherwise shows message "Invalid Login".

Thanks in anticipation.


I'm trying to use VBA to go to a website that requires a User Name, Password, and a Submit Button.

So far I can get everything to work besides the Submit part. The code runs without errors, but doesn't actually "hit" the submit button on the webpage.

For posting, I removed my actual user name and password and and used the generic " User Name " and " Password " highlighted in blue.

I highlighted another section in green that I took from a previous post hoping it would solve my problem. The link is: http://www.mrexcel.com/forum/showthr...xplorer+submit


Here is the code I am using:

Sub GoToWebSiteAndPlayAroundNew()

Dim appIE As Object ' InternetExplorer.Application
Dim URL As String


Set appIE = CreateObject("InternetExplorer.Application")
URL = " https://efolio.morgankeegan.com/escripts/defaultLogon.asp?errCode=2 "


With appIE
.navigate URL
.Visible = True

Do While .busy: DoEvents: Loop
Do While .ReadyState 4: DoEvents: Loop

.document.getelementbyid("fUserName").Value = " UserName "
.document.getelementbyid("fPassword").Value = " Password "

End With


On Error Resume Next
x = 0
For Each mitem In IE.document.all
mitem.Value = "x"
x = x + 1
Next

x = 0
For Each mitem In IE.document.all
If x = "Submit" Then
mitem.Click
Exit For
End If

Next

End Sub


Corporate edict.

I have a worksheet that is locked and protected now, except for cells in a certain collumn. I have named the cells in that column "MS96A".

If a user enters a date in a cell or range of cells anywhere in the column, the changed cells also need to be locked and protected (Once they enter a date, it is not allowed EVER to be changed again. Corporate requirement! *Shrug*).

What I am looking for is this. If the user selects that cell again, they will get the usual pop-up message, "The cell or chart that you are trying to change is protected..."

I think I am close, but I am getting an "End If without block If" error on the If Clause.


Sub Worksheet_Change(ByVal Target As Excel.Range)
Dim MRange As Range
Set MRange = Range("MS96A")
' If Not Intersect(Target, MRange) Is Nothing Then For Each cell In MRange Sheets("Sheet1").Unprotect Password:="temp"
cell.Interior.ColorIndex = 3
cell.Font.Color = vbBlack
Selection.Locked = True
Selection.FormulaHidden = False
Next cell
ActiveSheet.Protect Password:="temp", _
DrawingObjects:=False, _
Contents:=True, _
Scenarios:=False
ActiveSheet.EnableSelection = xlUnlockedCells
End Sub


Hi All,

I got the below macro which uses IE and open the URLs. I want to create a userform with listbox with radio button and commandbutton on the same which will help me to connect to each url when I select the same in listbox and click on the commandbutton.
Code:

Sub DoBrowse1()
    Dim ie As Object
    Set ie = CreateObject("Internetexplorer.Application")
    ie.Visible = True
    ie.Navigate "www.google.com"
End Sub


Any suggestions..


Hi all -

Im very familiar with how to write a macro to automatically autofilter a list based upon a Cell Value (i.e. Range =(A1)...etc.).... but what I cannot figure out how to correctly write is a way to have Excel automatically autofilter a list for any row that CONTAINS the Cell Value, instead of just the exact value.

Cell Value = "birds"
Example -- I need to filter every row so that I see every row that CONTAINS "birds" in the character-string, not just the row that = "birds".

a) is this possible?

If not, I'd like to know also so I can stop attempting to guess (-;
Thanks!!!

Matt

How do I grant only specific people to be able to open, view, edit an excel file? I don't want anybody else besides these two people to be able to even open the file, so I'm not talking about password protecting to prohibit editing a file. I would assume I need to go to the properties, security settings but I'm not sure?


I get the error message "reference is not valid" each time I open my spreadsheet. I get this message three times, and once I am done clicking ok on all three of them, my spreadsheet works just fine. The problem is, I have to send it to a bunch people.

I have a sheet with raw data a sheet with pivot tables a sheet with a dashboard and a simple macro
I don't have any #REF cells either.

Someone has any idea of what could be the problem?

thanks

NA


I have a requirement to change the panes in excel.
My excel file will contain more than one tab.
I have to free the first two lines in all the tabs except the first one.
I tried the following code.

Code:

xlsobj.Worksheets(1).Rows("1:2").Select
ActiveWindow.FreezePanes = True


But in this I have to change the Active Worksheets in VBA, Which I want to avoid.
Is there any method to achieve this without selecting the cells.
Something like
Code:

xlsobj.Worksheets(1).Rows("1:2").FreezePanes = True





I run a small business. I want to start keeping track of inventory using a barcode system.

I know Excel "ok", but I don't know programming.'

I'd like to be able to do something very simple (for now)...

For example...if I had PRODUCT / CODE / INV VALUE

A - CODE A - 5
B - CODE B - 11
C - CODE C - 14

I would want to be able to click a button (or scan a code for) : ADD +1 or REMOVE -1

...then scan the barcode on the product (A) and have it add or remove one, respectively. So, if the row for A is:

A - CODE A - 5

I choose "ADD" (with a button or scan code), then scan the barcode, and the spreadsheet automatically finds the code in the sheet, and changes the corresponding inventory value:

A - CODE A - 6

Does that make sense? How might I go about doing that?


Is it possible to apply a filter to multiple sheets within the same Excel workbook, using the same filter criteria?

For example, suppose you have tables of data on 3 different tabs, all having the same headings. Suppose one of the headings is "gender". If you apply a filter to the table on Sheet 1, to only show the rows containing the word "female", is it possible to have the tables on Sheets 2 and 3 automatically update to only show the "female" rows? Or would you have to manually update the filter criteria in Sheets 2 and 3?

I hope this makes sense. Thank you in advance for any help.


How do I get the colors to change automatically when I use a drop down list.
Per say here is what I am trying to do

If a certain "word" is used from the drop down list I want the background of
that cell to change its color to "green." And if later I change the "word" to
another from the drop down list, it will change it's color to a specified
color.

The drop down list that I use was created from cells that have the colors
already in the "word", but I do not know how to make the list show the colors
so it puts the word & color automatically in the drop down list to the cell
with the drop down (if that makes any sense).

If there is a way, please spell it out simple enough for me to understand,
as I don't know fully the capabilities of formulas or vba.



I'm trying to come up with a solution to calculate the man hours and days worked over multiple sheets.

I have a file that has 8 sheets. the first seven sheets are the days of the week and the 8th sheet is where I want to calculate the hours.

The days of the week consists of "Name" "Date" Hours"

The 8th sheet consists of "Name", "Days of the week in their own column (7 columns in total)", "Total Hours" and "Total Days Worked"

Now... each day is always a different group and what I'm hoping for is to create a formula that can grab each name with their hours and throw them into the 8th sheet. So when the end of the week is done I have all the Employees weekly hours and days worked all finished.

I hope this makes sense. This file is to track about 100 employees that are on a rotational work schedule.

I have attached a sample file.

Thanks in advance for your help.


Hello,

I am new to using Excel and I am not very computer literate. I am looking for some help with a spreadsheet I am making. Here is the problem:

I have a column of 14 numbers in cells A1 to A14. If all of these values are less than 2%, I would like a "Pass" to display in cell B1. If any of these values are greater than 2% I would like a "Fail" to display in cell B1.

I have got a formula that works for a single cell but I can't figure out how to get it to apply to more than one cell. For example, I have entered =IF(A1<2,"Pass","Fail") in cell B1. Now if the value I enter in A1 is less than 2, it shows a "Pass", and if the value in A1 is greater than 2 it shows a "Fail" in cell B1. How can I get this to apply to all of the cells from A1 to A14?

If somebody could help me out that would be great.

Thanks,
Randy


I'm trying to open a pdf file from within excel vba. I have tried using the followhyperlink method but adobe acrobat opens very briefly then immediately closes Code:

Sub OpenPDF()

'Dim pdf As String

    On Error Resume Next

    'pdf file to open
    pdf = "K:\PDF\mypdf.pdf"

    'open the pdf file
    ActiveWorkbook.FollowHyperlink pdf

End Sub


So then I tried to create an instance of acrobat by setting a reference to the acrobat object but I can't get this to work either!

The code I'm using is Code:

Sub OpenPDF()

    Dim pdf As AcroPDDoc
    Dim strPDF As String

    Set pdf = CreateObject("AcroExch.PDDoc")
    
    'pdf file to open
    strPDF = "K:\PDF\mypdf.pdf"

    'open the pdf file
    pdf.Open strPDF

End Sub


Any ideas what could be wrong with either approach?

Thank-you


I was wondering if there is a way of getting a macro to open the "save as" dialogue box and then have it fill in the "file name" field.

I dont want it to actually make the save though as I want the user to have the chance to check that the save location is correct and the option to change the filename if required.

Cheers.