Format Text In Textbox On Userform |
Format Text In Textbox On Userform - Excel |
|
http://www.j-walk.com/ss/excel/tips/tip51.htm
...has anyone managed to find a way to copy text formatting (bold, underline, strikethrough etc) from the source cell to the textbox on the form? I would really like to be able to do this.
Similar Topics
When a user clicks on a line in the listbox I want to automatically copy the text in the 3rd column of the selected line to the textbox.
If anyone could provide code which would allow me to do this I would be grateful
Thanks
Colin
How can I get the separate lines of text in my textbox to be properly displayed in a cell? Thanks for your help in advance..
Could you be so kind as to provide some code that will enable me to display a text box on a userform rounded up to 1 decimal place.
Where am I going wrong....
it calculates the number entered in textbox1 and divides it by a value that changes in cell O26 but the answer is in about 8 or more decimel places.
Only need like 65.3 as an answer not 65.277756942
This is the code ive used.
Private Sub CommandButton1_Click()
TextBox2.Value = Val(TextBox1.Value) / Range("O26").Value
End Sub
I have a userform with frames containing textboxes. The user enters a currency value and once they leave the control, then a protected textbox next to it shows the corresponding value in SEK. I started off using the exit event but ran into 2 problems.
If you tabbed out of the last textbox in the frame, the exit event never kicked in (this is documented in other topics but took some time to find). This resulted in me using the exit event for all except the last textbox in the frame that used afterupdate instead I then discovered that the exit events didn't kick in if, instead of tabbing out of the field, I deliberately placed focus in a control elsewhere on the form. Changing the event from exit to afterupdate corrected this. My question then is ... could you guys document in this topic when you would/must use the exit rather than the afterupdate event (or vice-versa).
Thanks
I have the following code to put data from a VBA userform into Excel
Dim Sh As Worksheet
Dim Rng As Range
Set Sh = ActiveSheet
Set Rng = Sh.Range("A65536").End(xlUp).Offset(1, 0)
With Rng
.Cells(1, 1) = Surname.Text
.Cells(1, 2) = forename.Text
.Cells(1, 3) = datein.Text
.Cells(1, 4) = origin.Text
.Cells(1, 5) = Addressee.Value
.Cells(1, 6) = usual.Value
.Cells(1, 7) = dateto.Text
.Cells(1, 8) = permission.Value
.Cells(1, 9) = dateseen.Text
.Cells(1, 10) = requestview.Value
.Cells(1, 11) = Invoice.Value
.Cells(1, 12) = notes.Text
.Cells(1, 13) = datecompleted.Text
.Cells(1, 14) = holdsend.Value
.Cells(1, 15) = fee.Text
.Cells(1, 16) = notes2.Text
.Cells(1, 17) = dateseen.Text
.Cells(1, 18) = invoicesent.Text
.Cells(1, 19) = Paid.Text
.Cells(1, 20) = Complete.Value
End With
What I want to do next is click on the surname on the speadsheet and call up the userform with the fields complete for that person. I would also like to be able to edit/update the form and update the information on the speadsheet accordingly.
Any help would be greatly appreciated!
Many thanks!
I've been struggling with this for a while now and can't believe how hard it is!. I've searched on this site and on others to get some clarification but to no avail.
It's pretty simple really. I have a user form which contains a tex box for a user to input the date I want the format to be dd/mm/yyyy but can't find out how to set the format of the text box to this.
Please can someone give me a bit of guidence or link me to a good rescource if missed it in the search.
Thanks in advance.
G
For example: Cell A1 has a time format (hh:mm) value of 04:00; which is the Start Time. I would like cell D1 to have a text format value of "04:00" (result is dependant upon what is entered in A1). I would duplicate the same formulas to reflect Stop Times in other cells.
My final result is to have another cell (F1) use the Concatenate formula to have the Start and Stop time shown in one cell as "04:00 - 12:30". The times would change based on the Time formated values entered into the Start and Stop time cells.
I have researched this in the board and found many excellent ways to do the opposite, but not convert Time format to Text format. Any assistance is greatly appreciated.
-Shane
Examples
Webb Christopher
Greer Nancy
I need to find cells with text that have more than one space between the first and last names; and cells with text that have only one space between the first and last names.
I am fairly new to excel. I can find the space after the first word but cannot tell it to find ones that say have a space then another string of text.
Thank you for your help!
I'm going nuts trying to figure out how to autofill text from one cell
to another. For example, everytime I type text into cell A20, I want
the exact same thing to cell BL20. The same for B20, BL20, etc.
How do I go about that? I already know how to copy formulas from one
cell to another by dragging the skinny black line of the cell. I guess
I just need the formula for a simple IDENTICAL copying of text.
Thanks in advance,
Mike
So if I input a date in Cell D7, then Cell B7 will receive a strikethrough.
Thanks
Louis
Here is my issue:
I have a list of SKUs in Excel and I need to add one same word to 500 cells that have pre-existing text in the cells. See example below:
1) List of SKU's in cells:
34
35
39
55
2) text that needs to be added IN FRONT of every number:
DF
So the result would be:
DF34
DF35
DF39
etc.
How do I do that in a formula and not manually? I found another similar thread and I understand how to do it from the instructions there but the same text goes on the back and the result is: 34DF but I need it to be like: DF34.
I am using Office 2007 for mac.
Thank you for the help,
Chris
I am copying charts to display the same information for different regions. When I work on the copied region, I find it a cumbersome task to go through each charts source data and change the cell references to the different region. Essentially I am doing a trending analysis for each region, with a region having its own sheet with 5 charts per sheet. What I have done is copy the original sheet and am updating the sheet for another regions source data by going to the source data. The source data is all in the same row/column format, but each regions source data has its own sheet. Is there a more automatic way to do this? Perhaps a way to update all 5 charts references at the same time.
statement? What I have in mind is something like this (stated simply): If
cells B9 or N9 or Z9 or AL9 are blank, do nothing, else color text in cell S4
red.
worksheet. The first column of the table is a list of numbers. I tried
converting the table into text with manual line breaks and tab stops to
divide columns and rows, but that didn't solve my problem.
Excel pastes the data into several rows. When I try to merge them, I
get a warning that the selection contains multiple data values, and
merging into one cell keeps the upper-left most data only.
What I tried that didn't work:
* Formatting the Excel cells as text before pasting the data.
* The various options for "Paste Special." The closest I got was
inserting the table as a Document Object, which could be a workaround,
I guess.
What I am saving for when all else fails:
* The obvious solution of copying row by row into one Excel cell.
The data in the table is information about my dad's medications. I
would like to have reference charts of how to identify the strength of
each tablet by its color and markings. I got the info from the
manufacturers' websites and entered it into tables in Word, which I
would like to copy into a more comprehensive file I am creating in
Excel. The first column of each table is the strength of the tablet,
entered as 1 mg., 2 mg., etc. The subsequent columns describe the
shape, color, and markings. There are 3 tables, each with about 4-5
rows.
Is there a way to copy each one - whether as a table or as text - into
a single Excel cell without losing data?
Many thanks.
format the text cells (name, etc) to have text entered as uppercase
automatically although the user might use title or lower case.
UPPER function cannot make cell look at itself and perform the function
Excel 2003
my text entries are rather lengthy. The past two weeks these lengthy entries
are showing up as pound signs (#########) when I click off the cell. I know
the text will fit in the cell, and the problem isn't solved by making the
cell bigger or using a little bit less text. I have the cells formatted as
"text" and "wrap to fit". I have printed the pages and the printed version
also has pound signs. I just want my text to show up!
to the email address, like change the font color or change on letter, Excel
tries to email the address. If I click in the formula bar to make the
changes, it automatically changes it back to all blue text and underlined. I
have tried to format all of the cells as "Text" to show as entered, but it
doesnt work. PLEASE HELP
My Cell C3 is a numeric value.....I have set conditional formatting to
make the text red and bold when the number is equal or less than 10,000
is there a way I can make cell E3 display a message when the C3
condition is true?? or if not a message is there a way to make a
message box pop up when my C3 condition of less then or equal to 10,000
is true?
how would I do something like this?
Does anyone have any suggestions about how to maintain the formatting when people just do a traditional C&P ?
Thanks
I'd like to do this in Excel, but I can't figure out how to have a randomly generating non-repeating macro with text values in cells.
So right now I have a column of 8 values and need matrix of 7 columns by 8 rows next to it.
I've found this thread that has one for numbers, but I can't figure out how to do it for text values...
http://www.excelforum.com/excel-prog...m-numbers.html
Thanks all!