Find All Combinations Of Cells That Add Up To Certain Number |
Find All Combinations Of Cells That Add Up To Certain Number - Excel |
|
I work in accounting and we're trying to tie numbers very often. I would
like to know of a possible function or code that can output all possible
combinations of cells in a column in an Excel Worksheet that add up to a
certain number I enter in the adjacent column. This will help me narrow down
to the possible combinations of numbers that add up to the number I am
researching.
Any help would greatly be appreciated.
Thanks,
AD!
Similar Topics
I need to know the formula (if there is one) for Excel to figure all the possible combinations of a given set of numbers that will add up to a specified sum.
In other words, if I give the following numbers 1, 2, 2, 3, 3, 4, 5, 5, 6, 7, 7 - I want Excel to figure all the possible combinations that will add up to 23, and also SHOW ME those combinations, and not just HOW MANY combinations there are.
i.e. one possible combination is 2, 2, 3, 4, 5, 7
Can this be done? What is the formula? I'm having a hard time figuring it out!!
Desperately,
Jenny
Here's my question...I have a list of numbers and I want to know how many combinations (and what they are) of adding the numbers will equal an amount.
e.g.
List of Numbers
1
2
3
4
5
6
7
8
9
10
Amount to be reached = 12
These are some of the possible combinations to reach 12 :
2+10
3+9
4+8
5+7
3+4+5
6+3+2+1
Is there a function in Excel that will do this for me? I want to know which numbers (i.e. cells) can be added to reach 12. AND, if possible, colorcode the cells added for each combination.
Good luck and thanks!!
Need help to generate Series of Items in different Permuation & Combinations..
For Ex:- If there are three Items.. A B C and forming a group of 2
then the the total no of combinations would be permut(3,1) = 6...
I need this to be shown as follows depending on the no of itmes and no of group no=2 in this case...
Permuations & Combinations are as follows:
AB
AC
BC
CA
CB
BA
a set of given numjbers. For example, 1, 3 and 8 would generate 138, 183,
318, 381, 813, 831 and so on...
lets suppose my numbers a 1,2,3,4,5,6,7,8,9,10,11
I want to generate all possibilities of the 6 numbers. But i dont want duplicate series.. I mean 1,2,3,4,5,6 and 6,5,4,3,2,1 are duplicates.
ANY HELPS ARE GREATLY APPRECIATED
For example. 1 2 3 4 5 6 7 8 9 10 11 taking 4 at a time:
1234
1235
Hoping someone can help me quickly as I'm pulling my hair out and have a deadline getting too close.
Been trailing the net and this board but can't work out how to do a simple variance.
How do I work out the difference between two numbers - including negatives.
If the numbers are all positive, it's fine as it's simply a case of A - B = C which is your difference. However, that doesn't work if B is negative.
I need a formula that would give the following:
First Number / Second Number / Difference
1 / 5 / 4
1 / -5 / -6
-1 / 5 / 6
-1 / -5 / -4
-5 / -1 / 4
Hopefully there's a simple function I've been missing.
Thanks in advance, R
James
format/cells/number from the category list. But it won't take, and stays
text-like. Any ideas?
i have a column of numbers that we extracted from a database as whole numbers. for instance, 30 should be .30 and 100 should be 1.00. when i try to increase or decrease the decimal point it doesn't allow me to convert it to those positions.
would any one have a tip of how i can easily convert this? there are over 2000 entries in my excel spreadsheet so to do it manually would take a lot of time/effort.
thank you!
E.g.
Manchester United 3 - 0 Arsenal
Prediction: 4 - 1
Points: 1
I've found a formula online that works for most scores; the correct score (e.g. 3 - 0), a correct win (e.g. 4 - 1), and in the case of a draw (e.g Man Utd 1 - 1 Arsenal, and the prediction 2 -2), correct draw (but not the correct score). The points are as follows: Correct draw (Prediction = result): 4 Correct win (Prediction = result): 3 Correct win, incorrect score (Winner correct, score not): 1 Correct draw, incorrect sco 1
The formula I found online for all but the correct draw is: =IF(A3&B3=C3&D3),3,IF(AND(A3=B3,C3=D3),1,IF(AND(A3>B3,C3>D3),1,IF(AND(A3<B3,C3<D3),1,0)))))
Could someone help me work out how I can write a formula to add before the above that will check the contents of four cells (the home score, away score, home prediction, away prediction), and if the number in all 4 cells are the same, allocate 4 points? I've tried using averages, but some combinations would void this. I've also used the SUM function, but the same happens, as with MULTIPLYING.
Something like =IF(A3:D3) are equal, 4,0
Below are a few examples of what I mean:
(Result) (Prediction) (Points)
A B C D E
3 - 3 3 - 3 4
2 - 1 3 - 1 1
1 - 0 1 - 0 3
3 - 3 2 - 2 1
Apologies in advance if I haven't explained this clearly enough.
Thanks
Will
I'm a bit of a newbie with Excel, but...
I have several cells with data that contain both letters and numbers (4H, 8V, 4FH, etc.) What I want to do is remove only the text characters from these cells, and add the remaining number values together among a series of cells with this data type.
If your answer involves using a macro or VB, please provide a link on how to use the formula. I've never used a macro or VB.
Thanks.
I am trying to make excel automatically add a leading zero to values which are 5 digits long;
i.e. number input is 15185, then excel automatically changes it to 015185.
If I put a Customer Number Format of 0##### it works, however, a user could put any length of number into these cells, and if the number is less than 5 digits I don't want a leading zero.
Is there any way of writing a small macro to sort this out.
The numbers would be input into range B16:223.
Many thanks,
Andy
For example my numbers are formatted like this: 1234 and I would like to add zeros to the end so it looks like this: 123400 (no decimal).
I would do it manually but I have a column of over 2000 different numbers.
Thanks for your help, you guys are great!
I am trying to understand why I can not use Ctrl+F to find data in Column B, yet I can find the data in Column A.
I have a worksheet that in column A has numbers, in column B, the following formula "IF(ISNUMBER($A1),$A1,"").
Ctrl+F will find numbers in Column A, yet not in Column B. Why is this so? What can be done to ensure Ctrl+F works in Column B?
Probably a simple little function, help would be appreciated!
I'd like to take a number entered into one cell ie. A1 = 20
and split it randomly but evenly over 3 other cells ie.
B1=6
C1=8
D1=6
Number should be whole and no zeros?
Thanks all!
I am working with an Excel spreadsheet and saving it as a .csv file in order to upload to an application that parses out the .csv data as transactions. The system requires .csv files, so this is how I need to save my doc (with this extension). I have been successful at preventing Excel from coverting that long number into scientific format. I have saved as a TXT file, pasted the longer number and it displays correctly. That is all good. But I have to save as a .csv. So if I do that, close the Excel window, and then open again (as the .csv file), the numbers are back to being displayed in scientific format. I have tried creating an Excel doc from scratch and entering text in Text format, to see if this created a cleaner file. But again, the second I save as .csv, close the window and then open that file up again, that dang scientific format is back.
Does anyone have any idea of how to work around this? Once I have successfully gotten the numbers to display as the long-chain number, how can I get them to "stick" so that they don't revert back to scientific format when I reopen the file?
Thanks so much for your help!
i would like to know how to change english numbers to arabic number on excel
, where when i change the language from english to arabic the numbers didnt
changed it still in english
I'd like to do this in Excel, but I can't figure out how to have a randomly generating non-repeating macro with text values in cells.
So right now I have a column of 8 values and need matrix of 7 columns by 8 rows next to it.
I've found this thread that has one for numbers, but I can't figure out how to do it for text values...
http://www.excelforum.com/excel-prog...m-numbers.html
Thanks all!
The Geomean function doesn't work because it only uses positive numbers.
Any help would be greatly appreciated.