Excel VBA Course
Excel VBA Course - From Beginner to Expert

200+ Video Lessons
50+ Hours of Video
200+ Excel Guides

Become a master of VBA and Macros in Excel and learn how to automate all of your tasks in Excel with this online course. (No VBA experience required.)

View Course

(80% Discount Ends Soon!)

Close Window (X)   
Excel VBA Course
[80% Discount] Excel VBA Course - From Beginner to Expert

200+ Video Lessons
50+ Hours of Video
200+ Excel Guides

Become a master of VBA and Macros in Excel and learn how to automate all of your tasks in Excel with this online course. (No VBA experience required.)

View Course

(80% Discount Ends Today!)

This Operation Requires The Merged Cells To Be Identically Sized

I am getting this error when I select a merged cell and an adjacent cell and try to drag them down the page (the lower right hand corner grab, to have it extend the formulas into the cells you drag over)

I only see the solution to remove the merged cells, but I cannot remove the merged cells, as it would disturb the formatting of the spreadsheet.

I can select the merged cell and drag it individually, but just not when I select the merged cell in addition to other cells. How do I go about fixing this, so I can select the merged cells and the adjacent non merged cells and drag down the page.

-Andrew


Excel VBA Course
Excel VBA Course - From Beginner to Expert

200+ Video Lessons 50+ Hours of Instruction 200+ Excel Guides

Become a master of VBA and Macros in Excel and learn how to automate all of your tasks in Excel with this online course. (No VBA experience required.)

(80% Discount Ends Soon!)

View Course




Similar Topics







I have a merged cell which contains a text with multiple lines.
I want to split the lines into multiple rows.Each line should come in a different row.
I want to do this using macro.Is there is anyway to do this?
There is an option to split the cell into multiple cells on the basis of the delimiter, but there is no option to split them into rows.


Hello from sunny Madrid

I have created a complex formula to help me calculating Golf handicaps for players.


The formula is in the first cell and I want to drag the formula across to the right to cover the 18 holes.

But ALL the values change and I want some to change and some to stay constant.



How do I tell excel to drag the formula across but keep certain parts of the formula the same..ie ....=D11.... in the formula when dragged across doesn't go D12,D13;D14 in each cells formula and should stay as D11 for all.

Many thanks for your help

Ole


All on a sudden my mouse pointer in excel is not working properly. I cannot use my mouse to drag and fill, or to adjust the page break lines in the Page Break View mode. It always is in the shape of the white cross with black border and never changes it shape when pointed at the lower right edge of cells too. Now.......what to do in order to get out of this problem.
TIA


I saw two threads in this forum that asked this question, with no good answer. I am posting this solution for anybody still struggling with this.

The question:
How can you prevent a cell's contents from overflowing into the next cell?

Of course, you can make the column wider or turn on text wrapping, but you might not want to. Each of those solutions can mess up the layout of your sheet. You may just want to truncate the value.

Some people have suggested putting a space in the next cell. This is unnecessary, a pain in the but, and will mess up any ISBLANK type formulas, among other things.

The solution:
Select the cells in question and turn on text wrapping (Format>Cells>Alignment>Wrap Text).
Now select the row(s) in question and manually set the row height, by right clicking the row number and selecting "Row Height". Check the height of an adjacent row for a good value.

Your cells will now not spill over either horizontally or vertically. They will simply truncate anything that doesn't fit.

Be careful now, because parts of your data may be hidden. This can cause its own set of problems if one or two digits are neatly hidden away. Think ahead if other people might be using this sheet, and not be expecting to have some data hidden.

Tested in Excel 2002


I know I can put a $ sign for all references in a formula for a cell by pressing F4, but is there a quick way for doing this for multiple cells (e.g. a column) or do I have to go through all the cells individually?

e.g.
=A1
=A2
=A3

to

=$A$1
=$A$2
=$A$3

Thanks


Hi there. I'm using Excel 2007 and often use filters to find inconsistent data (mis-spellings, etc.) and then clean up the data using the fill handle to fill in correctly formatted values. I'm finding that, with a simple filter on, dragging over cells hidden by the filter changes the values in the hidden cells too. This is something I don't remember from my last version of Excel. I'm wondering if I've mis-remembered how this control works, or if there is a setting I can't find.

My goal is to drag and fill (or paste) in a colum with a range of rows wiht some hidden (filtered out) rows, and have the filtered out data be unaffected, if that makes sense.

Thanks!

T


Hi All,

If I drag a formula to the right it adapts the column letter in the formula from A to column B, which is standard Excel functionality.

However, if I drag the formula to the right I want Excel to skip a column each time.

In other words:

=A1 ; = B1 ; = C1

Should be

=A1 ; = C1 ; = E1 etc...

Is there an easy trick to do this?

Thanks,

Michiel


Let's say, if two fields in one column has been filled with numerical
increament, i.e. A1 is 2 and A2 is 4. Now I want to fill the whole column
with this increament pattern till row A20. One thing we will all do is to
left click on the fill handle and drag it down to row A20. But if the task is
to fill to row 500, the mouse draging sometime won't be easy to locate the
row. I am wondering anyone can help me to find the keyboard shortcut
equivalent to that drag fill handle action.

Thanks



Hello,

I'm a bit of a newbie with Excel, but...

I have several cells with data that contain both letters and numbers (4H, 8V, 4FH, etc.) What I want to do is remove only the text characters from these cells, and add the remaining number values together among a series of cells with this data type.

If your answer involves using a macro or VB, please provide a link on how to use the formula. I've never used a macro or VB.

Thanks.


I would like to know if it is possible to deselect 1 cell after selecting
many cells using the CTL-Click method. For example, you are indivdually
selecting cells in a worksheet and you accdidently select a cell you dont
need, how can you deselect that one cell without deselecting all of them and
starting over again?



Today I ran into an odd problem. I typed in values for column A rows 1 through 10 then values for column B rows 1 through 10. then in column C, I made the formula C1=A1/B1. The math was correct it showed 542 in the C1 cell. So I dragged that formula down and it showed 542 in all column C cells which is not correct. And when I went to check to see if the formula was correctly dragged it was. For instance, the formula in C2 is =A2/B2 however the value of that cell showed 542 which was not the correct math/value.

But it gets even more weird. When I click on the Column C cells and then it shows the formula up top in the formula bar and if I put my cursor anywhere in the formula bar and hit Return the formula does not change however the correct value then appears in the Column C cell. It is like the act of putting the cursor in the formula activates it to work properly but until it is activated that C cell shows the value of the cell which it was dragged down from.

This is quite bizarre. Has anyone ever seen this before? I have no idea what is going on. I ran a scan for viruses and none were found. I tried it on several new/different spreadsheets but it keeps happening.

Thanks for any tips on this.


Column 1 has roughly 20 rows of information. Cell C1 has the formula =A1.

Is there a formula so that when I drag C1 horizontally into D1, E1, F1, ..., the values placed in each cell will be =A2, =A3, =A4, ...

I do not want to transpose the values from column 1 into C1, D1,.... I want these cells to have a formula that links them up to column 1's values

Thanks

Hi
I am a new user and trying to setup a database in excel. I can select all addresses and copy but when trying to paste into excel it does so in 1 cell.

Is there a way I can paste the separate email id's into individual cells so I don't have to do it individually?

Many thanks
Patrick


I found this solution for "drop down list with hyperlink" but it did not work.

Perhaps a better solution is to use a workaround that relies on the HYPERLINK function to refer to whatever is selected in the drop-down list. For instance, if you have your data validation drop-down list in cell A1, then you might put the following formula in cell B1:

=HYPERLINK(A1, "Goto Link")

The solution directly above provides exactly what I am looking for
in the field where I write the formula, but it fails to hyperlink.
I have created a drop down list and linked each one of them to a
specific worksheet. When I select them individually they link to
appropriate worksheet. But when I select them in the drop down
list I receive the following error when I select the Hyperlink in
cell B1 as directed above.

"Cannot open the specified file"

Any thoughts?

Bob


I have a spreadsheet with simple (addition/subtraction) formulas. The file is quite large and the formulas are too. All of a sudden, the formulas stopped working except when I double click in the cell containing the actual formula. For example, if I enter "2" in each cell, A2 and B2, cell B3 should reflect "4" because there is a formula in cell B3 which totals cells A2 and B2. Only by double clicking on cell B3 will the program actually calculate. I'm totally perplexed and so is my IT contact. Anyone?


Hello -

I am using Excel 2007. In prior versions of excel, when copying data, if I wanted to copy visible cells only, I would select "Go To, Special, Visible Cells Only" and then copy a range a cells. The default was always set to copy everything (including hidden cells), unless I specifically selected copy visible cells only.

In 2007, the default is somehow set to always copy only visible cells. Sometimes, I want to be able to copy all cells including those hidden but cannot seem to figure out how to swith this default option. I looked under Excel Options and did not see an option there.

I don't want to have to unhide and rehide everything each time i copy. I know i could do the hiding and unhiding via VBA but would prefer not to have to.

Thanks for your suggestions.


Hi,

I have the following code to put data from a VBA userform into Excel

Dim Sh As Worksheet
Dim Rng As Range
Set Sh = ActiveSheet
Set Rng = Sh.Range("A65536").End(xlUp).Offset(1, 0)
With Rng
.Cells(1, 1) = Surname.Text
.Cells(1, 2) = forename.Text
.Cells(1, 3) = datein.Text
.Cells(1, 4) = origin.Text
.Cells(1, 5) = Addressee.Value
.Cells(1, 6) = usual.Value
.Cells(1, 7) = dateto.Text
.Cells(1, 8) = permission.Value
.Cells(1, 9) = dateseen.Text
.Cells(1, 10) = requestview.Value
.Cells(1, 11) = Invoice.Value
.Cells(1, 12) = notes.Text
.Cells(1, 13) = datecompleted.Text
.Cells(1, 14) = holdsend.Value
.Cells(1, 15) = fee.Text
.Cells(1, 16) = notes2.Text
.Cells(1, 17) = dateseen.Text
.Cells(1, 18) = invoicesent.Text
.Cells(1, 19) = Paid.Text
.Cells(1, 20) = Complete.Value

End With

What I want to do next is click on the surname on the speadsheet and call up the userform with the fields complete for that person. I would also like to be able to edit/update the form and update the information on the speadsheet accordingly.

Any help would be greatly appreciated!

Many thanks!


I recently moved into a new office and I am using a brand new computer on our network. When trying to edit an existing file, I'm not able to select a single cell and type. After clicking on a cell, if I move the mouse at all (even without pressing the left button) it just continues highlighting cells no matter where I move the mouse. I am also not able to click on the tool bars at all. I have to actually Ctrl-Alt_del to get out of the program. I'm sure this is something simple, but I don't know that much about this program. Any help would be greatly appreciated.


Hi! I am new to Excel and I am creating fillable forms in excel which are protected so that users canonly input data in certain cells. I am using Excel 2003. The users told me that they do not want text to go beyond the edge of the page when they are inputting data. They also want the words to wrap when they reach the end of the sentence. I am also using check boxes(yes/no) and Ifind it difficult to make the adjacent cells fillable only Thanks for your help and correct me if I am wrong as I am new to this board.


Hello,


I need vba code to Select first visible cell below the header row after applying autofilter on column Q of the data. Can somebody help me on this?


I tried

http://www.mrexcel.com/forum/showthread.php?t=403989

but it does not work. Probably because column Q is filtered to show only blank cells,

Can somebody help me on this?

Thanks,
awagdarikar