Userform Find Cell From Combobox Value And Write To Adjacent Cell |
Userform Find Cell From Combobox Value And Write To Adjacent Cell - Excel |
|
I am having a problem using data from my combobox to find the cell on the worksheet and write to the adjacent cell.
Worksheet name is Fleet
ComboBox Name is ComboBox7
TextBox name is TextBox3
CommandButton1
I would like to be able to take the text from ComboBox7, find this text in Col A of worksheet Fleet and write the Value of TextBox3 in the adjacent cell in Col B. when
the CommandButton1 is pressed.
Can anyone help please?
Similar Topics
How can I get the separate lines of text in my textbox to be properly displayed in a cell? Thanks for your help in advance..
This is a very basic question, but i have been struggling for hours, so I must ask.
I I trying to simply fill a combobox on a userform from a named range on a sheet, I want to populate the combobox as soon as the userform starts. (I launch the userform from a button on the sheet) Where must I place the code? and will this code work?
Code:
Sub Button1_Click() Set UserForm1.combobox1.List = Sheets("Sheet1").Range("MyRange") UserForm1.Show End Sub
I am very new to vba, so please excuse my ignorance,
any help would be greatly appreciated
regards
jim
Can anyone help?
Thanks
The question:
How can you prevent a cell's contents from overflowing into the next cell?
Of course, you can make the column wider or turn on text wrapping, but you might not want to. Each of those solutions can mess up the layout of your sheet. You may just want to truncate the value.
Some people have suggested putting a space in the next cell. This is unnecessary, a pain in the but, and will mess up any ISBLANK type formulas, among other things.
The solution:
Select the cells in question and turn on text wrapping (Format>Cells>Alignment>Wrap Text).
Now select the row(s) in question and manually set the row height, by right clicking the row number and selecting "Row Height". Check the height of an adjacent row for a good value.
Your cells will now not spill over either horizontally or vertically. They will simply truncate anything that doesn't fit.
Be careful now, because parts of your data may be hidden. This can cause its own set of problems if one or two digits are neatly hidden away. Think ahead if other people might be using this sheet, and not be expecting to have some data hidden.
Tested in Excel 2002
Examples
Webb Christopher
Greer Nancy
I need to find cells with text that have more than one space between the first and last names; and cells with text that have only one space between the first and last names.
I am fairly new to excel. I can find the space after the first word but cannot tell it to find ones that say have a space then another string of text.
Thank you for your help!
The code works, but it really slows my worksheet down when opening. Is there better way to write this? Thanks!
Code:
Dim myRange As Range Dim cell As Range Set myRange = Range("V6:V50000") For Each cell In myRange If cell.Value < 2 Then cell.Font.ColorIndex = 5 If cell.Value < 1 Then cell.Font.ColorIndex = 3 Next
Perhaps a better solution is to use a workaround that relies on the HYPERLINK function to refer to whatever is selected in the drop-down list. For instance, if you have your data validation drop-down list in cell A1, then you might put the following formula in cell B1:
=HYPERLINK(A1, "Goto Link")
The solution directly above provides exactly what I am looking for
in the field where I write the formula, but it fails to hyperlink.
I have created a drop down list and linked each one of them to a
specific worksheet. When I select them individually they link to
appropriate worksheet. But when I select them in the drop down
list I receive the following error when I select the Hyperlink in
cell B1 as directed above.
"Cannot open the specified file"
Any thoughts?
Bob
I'm trying to extract all the text in a cell which is on the right side of a comma (,)
Currently I am using this formula,
=RIGHT(C1,FIND(",",C1)-1)
However it sometimes is missing some of the data after the , and sometimes pulling a few characters before the ,
any suggestions on how to correct my formula please?
Thanks in advance.
I have the following code to put data from a VBA userform into Excel
Dim Sh As Worksheet
Dim Rng As Range
Set Sh = ActiveSheet
Set Rng = Sh.Range("A65536").End(xlUp).Offset(1, 0)
With Rng
.Cells(1, 1) = Surname.Text
.Cells(1, 2) = forename.Text
.Cells(1, 3) = datein.Text
.Cells(1, 4) = origin.Text
.Cells(1, 5) = Addressee.Value
.Cells(1, 6) = usual.Value
.Cells(1, 7) = dateto.Text
.Cells(1, 8) = permission.Value
.Cells(1, 9) = dateseen.Text
.Cells(1, 10) = requestview.Value
.Cells(1, 11) = Invoice.Value
.Cells(1, 12) = notes.Text
.Cells(1, 13) = datecompleted.Text
.Cells(1, 14) = holdsend.Value
.Cells(1, 15) = fee.Text
.Cells(1, 16) = notes2.Text
.Cells(1, 17) = dateseen.Text
.Cells(1, 18) = invoicesent.Text
.Cells(1, 19) = Paid.Text
.Cells(1, 20) = Complete.Value
End With
What I want to do next is click on the surname on the speadsheet and call up the userform with the fields complete for that person. I would also like to be able to edit/update the form and update the information on the speadsheet accordingly.
Any help would be greatly appreciated!
Many thanks!
I'm going nuts trying to figure out how to autofill text from one cell
to another. For example, everytime I type text into cell A20, I want
the exact same thing to cell BL20. The same for B20, BL20, etc.
How do I go about that? I already know how to copy formulas from one
cell to another by dragging the skinny black line of the cell. I guess
I just need the formula for a simple IDENTICAL copying of text.
Thanks in advance,
Mike
Im very familiar with how to write a macro to automatically autofilter a list based upon a Cell Value (i.e. Range =(A1)...etc.).... but what I cannot figure out how to correctly write is a way to have Excel automatically autofilter a list for any row that CONTAINS the Cell Value, instead of just the exact value.
Cell Value = "birds"
Example -- I need to filter every row so that I see every row that CONTAINS "birds" in the character-string, not just the row that = "birds".
a) is this possible?
If not, I'd like to know also so I can stop attempting to guess (-;
Thanks!!!
Matt
Found the following code and it gets me close, but it copies the cell references, not the values. It also allows me to specify the file name from a cell reference.
I want the new workbook file to simply be saved, not opened, and a message box to display stating where the file was saved (will always be in the same location on the LAN).
What modifications do I make to this to get this to work per above requirements?
Sub CopyMe()
Dim SaveMeAs As String
SaveMeAs = Sheets("Sheet1").Range("B2").Text
Sheets("Sheet3").Copy
ActiveWorkbook.SaveAs Filename:="C:\My Documents\" & SaveMeAs
End Sub
worksheet are using it, they can't change the width. It's for editors who
write headlines for specific areas that can only be as long as the column is
wide or the text won't fit.
When a user clicks on a line in the listbox I want to automatically copy the text in the 3rd column of the selected line to the textbox.
If anyone could provide code which would allow me to do this I would be grateful
Thanks
Colin
my text entries are rather lengthy. The past two weeks these lengthy entries
are showing up as pound signs (#########) when I click off the cell. I know
the text will fit in the cell, and the problem isn't solved by making the
cell bigger or using a little bit less text. I have the cells formatted as
"text" and "wrap to fit". I have printed the pages and the printed version
also has pound signs. I just want my text to show up!
I want to combine data from several worksheets into one worksheet.
For example, I have data in Sheet1 (Columns A,B,C), data in Sheet2 (Columns A,B,C), data in Sheet3 (Columns A,B,C) all with varying amounts of rows. (All the rows contain text data).
I need to combine all of the data from the 3 sheets into a single sheet, Sheet4 (Columns A,B,C), eliminating the empty rows.
I've been looking into this for a while, and can't find anything that really helps. Anyone got any pointers of what to look into?
Any help will be beautiful.
Cheers
I am trying to reference a cell on another worksheet, the cell is formatted to be a date. when i put in the following formula =Sheet2!A1 and i don't input a date into A1 on sheet 2 the cell containing the formula shows the date 00/01/1900, is there any way of stopping this showing, ideally the cell would be blank until I inputted a date into A1 on sheet 2
Any help would be very much appreciated
My problem is Tab no longer moves your active cell selection one to the right. It now moves to the last cell in your spreadsheet to the right (similar to CTRL+Arrow Key Right).
I seem to remember this being a simple setting you can change, but was unable to find it myself, or search the web for the way out. So my last result is asking the experts .
Do any of you know how to make it so Tab goes back to just moving one cell to the right again?
Thanks in advanced.
worksheet. The first column of the table is a list of numbers. I tried
converting the table into text with manual line breaks and tab stops to
divide columns and rows, but that didn't solve my problem.
Excel pastes the data into several rows. When I try to merge them, I
get a warning that the selection contains multiple data values, and
merging into one cell keeps the upper-left most data only.
What I tried that didn't work:
* Formatting the Excel cells as text before pasting the data.
* The various options for "Paste Special." The closest I got was
inserting the table as a Document Object, which could be a workaround,
I guess.
What I am saving for when all else fails:
* The obvious solution of copying row by row into one Excel cell.
The data in the table is information about my dad's medications. I
would like to have reference charts of how to identify the strength of
each tablet by its color and markings. I got the info from the
manufacturers' websites and entered it into tables in Word, which I
would like to copy into a more comprehensive file I am creating in
Excel. The first column of each table is the strength of the tablet,
entered as 1 mg., 2 mg., etc. The subsequent columns describe the
shape, color, and markings. There are 3 tables, each with about 4-5
rows.
Is there a way to copy each one - whether as a table or as text - into
a single Excel cell without losing data?
Many thanks.