Flipping Excel Spreadsheet On Axis And Paste Special (transpose) |
Flipping Excel Spreadsheet On Axis And Paste Special (transpose) - Excel |
|
Hi there,
I have an excel spreadsheet with 43 columns 381 rows, I need to switch these around so that the data in the rows is in columns and vice versa, but keeping the order of the data (its a very complex rota).
I googled this and found the copy>paste special>transpose function, however i have had some problems with this. Whenever i select paste special>transpose etc, a box pops up telling me the cells are different sizes and therefore cannot be pasted. Some of the cells are empty and some are different colours.
Does anyone know a solution for this or perhaps a different method of achieving the same thing?
On a similar line, this is something that will need to be done annually for a few spreadsheets and is quite laborious. I was wondering if anyone may give me some advice on if i can and how to create a program/forumla to do this automatically? I thought it may be possible through VBA.
I am running Excel 2003 on a windows XP machine (at work so i dont have admin privilidges)
Many thanks for any help
I have an excel spreadsheet with 43 columns 381 rows, I need to switch these around so that the data in the rows is in columns and vice versa, but keeping the order of the data (its a very complex rota).
I googled this and found the copy>paste special>transpose function, however i have had some problems with this. Whenever i select paste special>transpose etc, a box pops up telling me the cells are different sizes and therefore cannot be pasted. Some of the cells are empty and some are different colours.
Does anyone know a solution for this or perhaps a different method of achieving the same thing?
On a similar line, this is something that will need to be done annually for a few spreadsheets and is quite laborious. I was wondering if anyone may give me some advice on if i can and how to create a program/forumla to do this automatically? I thought it may be possible through VBA.
I am running Excel 2003 on a windows XP machine (at work so i dont have admin privilidges)
Many thanks for any help
Excel VBA Course - From Beginner to Expert
200+ Video Lessons 50+ Hours of Instruction 200+ Excel Guides
Become a master of VBA and Macros in Excel and learn how to automate all of your tasks in Excel with this online course. (No VBA experience required.)
(80% Discount Ends Soon!)
Similar Topics
I did a search in here but didn't find an answer so here goes nothing...
I have a spreadsheet with data from A1 to H1 down to A275 to H275. I select all of it, Copy, go into the Sheet2 tab and select A1, Paste Special -> Transpose and it give me the following error message:
Quote:
The information cannot be pasted because the Copy area and the paste area are not the same size and shape. Try one of the following:
- Click a single cell, and then paste.
- Select a rectangle that's the same size and shape, and then paste.
For the life of me, I can't figure out why it's not working! I have done this many times with other spreadsheets. Has anyone ever experienced this? If so, were you able to resolve it and how?
Many Thanks,
Mike
I have a spreadsheet with data from A1 to H1 down to A275 to H275. I select all of it, Copy, go into the Sheet2 tab and select A1, Paste Special -> Transpose and it give me the following error message:
Quote:
The information cannot be pasted because the Copy area and the paste area are not the same size and shape. Try one of the following:
- Click a single cell, and then paste.
- Select a rectangle that's the same size and shape, and then paste.
For the life of me, I can't figure out why it's not working! I have done this many times with other spreadsheets. Has anyone ever experienced this? If so, were you able to resolve it and how?
Many Thanks,
Mike
We have a number of Excel users in our office who cannot copy and paste
between Excel workbooks. They can copy and paste between worksheets. When
you highlight the section to copy and then go to the new workbook both the
paste
and paste special are "grayed out". This is true whether you right-click the
mouse, go to the edit menu, or use control keys. This occurs with any data
type and the most simple workbooks. I have seen some suggestions here but
none have worked for this particular problem. I have reset the menus and
renamed the .xlb files and neither helps. You can open the clipboard and the
paste will work, but there is no paste special option. Any help would be
greatly appreciated. Thanks!
between Excel workbooks. They can copy and paste between worksheets. When
you highlight the section to copy and then go to the new workbook both the
paste
and paste special are "grayed out". This is true whether you right-click the
mouse, go to the edit menu, or use control keys. This occurs with any data
type and the most simple workbooks. I have seen some suggestions here but
none have worked for this particular problem. I have reset the menus and
renamed the .xlb files and neither helps. You can open the clipboard and the
paste will work, but there is no paste special option. Any help would be
greatly appreciated. Thanks!
I am trying to do a very simple copy and paste of a simple formula in Excel 2007 and nothing seems to be working. Excel will not let me copy and paste a formula and will only paste the value into to workbook. For instance, if I make a very simple spreadsheet such as:
A1 type in 10, A2 type in =A1 (calculated A2 to be 10)
B1 type in 5
And then click the copy on B1, and then click paste special on cell B2, the only options it gives me are text and unicode text and so no matter how I paste, cell b2 will always be populated with a value of 5. I cannot imagine a simpler copy and paste and no matter what I do I can't make this work.
All cells are formatted as general. It seems that all copy and pasting of formulas in my excel has been disabled. If I open any spreadsheet on my computer, I can't copy and paste formulas, but do the exact same thing on the exact same spreadsheet on any other computer and it works no problem.
Any help?
A1 type in 10, A2 type in =A1 (calculated A2 to be 10)
B1 type in 5
And then click the copy on B1, and then click paste special on cell B2, the only options it gives me are text and unicode text and so no matter how I paste, cell b2 will always be populated with a value of 5. I cannot imagine a simpler copy and paste and no matter what I do I can't make this work.
All cells are formatted as general. It seems that all copy and pasting of formulas in my excel has been disabled. If I open any spreadsheet on my computer, I can't copy and paste formulas, but do the exact same thing on the exact same spreadsheet on any other computer and it works no problem.
Any help?
I would like to copy a small table from Word into one cell in an Excel
worksheet. The first column of the table is a list of numbers. I tried
converting the table into text with manual line breaks and tab stops to
divide columns and rows, but that didn't solve my problem.
Excel pastes the data into several rows. When I try to merge them, I
get a warning that the selection contains multiple data values, and
merging into one cell keeps the upper-left most data only.
What I tried that didn't work:
* Formatting the Excel cells as text before pasting the data.
* The various options for "Paste Special." The closest I got was
inserting the table as a Document Object, which could be a workaround,
I guess.
What I am saving for when all else fails:
* The obvious solution of copying row by row into one Excel cell.
The data in the table is information about my dad's medications. I
would like to have reference charts of how to identify the strength of
each tablet by its color and markings. I got the info from the
manufacturers' websites and entered it into tables in Word, which I
would like to copy into a more comprehensive file I am creating in
Excel. The first column of each table is the strength of the tablet,
entered as 1 mg., 2 mg., etc. The subsequent columns describe the
shape, color, and markings. There are 3 tables, each with about 4-5
rows.
Is there a way to copy each one - whether as a table or as text - into
a single Excel cell without losing data?
Many thanks.
worksheet. The first column of the table is a list of numbers. I tried
converting the table into text with manual line breaks and tab stops to
divide columns and rows, but that didn't solve my problem.
Excel pastes the data into several rows. When I try to merge them, I
get a warning that the selection contains multiple data values, and
merging into one cell keeps the upper-left most data only.
What I tried that didn't work:
* Formatting the Excel cells as text before pasting the data.
* The various options for "Paste Special." The closest I got was
inserting the table as a Document Object, which could be a workaround,
I guess.
What I am saving for when all else fails:
* The obvious solution of copying row by row into one Excel cell.
The data in the table is information about my dad's medications. I
would like to have reference charts of how to identify the strength of
each tablet by its color and markings. I got the info from the
manufacturers' websites and entered it into tables in Word, which I
would like to copy into a more comprehensive file I am creating in
Excel. The first column of each table is the strength of the tablet,
entered as 1 mg., 2 mg., etc. The subsequent columns describe the
shape, color, and markings. There are 3 tables, each with about 4-5
rows.
Is there a way to copy each one - whether as a table or as text - into
a single Excel cell without losing data?
Many thanks.
I have a spreadsheet that when I copy the formula, it copies correctly
(changes the cells it should subtract), however, the result stays the same.
It matches the formula I copied it from, even though the cells to calculate
are now different. I even did a paste special and said only formula, but
still, same result. If I actually type in the formula, it works fine, but I
have a lot I need to copy and paste. Is there a way I can fix this?
Thanks,
(changes the cells it should subtract), however, the result stays the same.
It matches the formula I copied it from, even though the cells to calculate
are now different. I even did a paste special and said only formula, but
still, same result. If I actually type in the formula, it works fine, but I
have a lot I need to copy and paste. Is there a way I can fix this?
Thanks,
i want to retain the data and format, but get rid of the pivot capacity before sharing the spreadsheet. right now if a copy/paste special, i can get the data, but not the formats, any suggestions?
Hi,
I use filters a lot at my work. One thing I've noticed is that if I have something filtered and want to copy and paste only what I see from one column to another column right next to it, it will copy what is filtered, but then paste into the unfiltered portion.
Is there some way to copy only what I see when it's filtered, THEN paste only onto the adjancent cells which is also filtered?
For example let's say i have each of the number below in a cell (Fig 1). And then I hide rows 2 -3, so only 1 and 4 is showingI only see 1 & 4 in column A. I want to copy and paste 1 and 4 to the next column over one row so it looks like Fig. 2 when unhidden. Not like Fig. 3.
Fig. 1
1
2
3
4
Fig. 2
1 1
2
3
4 4
Fig. 3
1 1
2 4
3
4
I use filters a lot at my work. One thing I've noticed is that if I have something filtered and want to copy and paste only what I see from one column to another column right next to it, it will copy what is filtered, but then paste into the unfiltered portion.
Is there some way to copy only what I see when it's filtered, THEN paste only onto the adjancent cells which is also filtered?
For example let's say i have each of the number below in a cell (Fig 1). And then I hide rows 2 -3, so only 1 and 4 is showingI only see 1 & 4 in column A. I want to copy and paste 1 and 4 to the next column over one row so it looks like Fig. 2 when unhidden. Not like Fig. 3.
Fig. 1
1
2
3
4
Fig. 2
1 1
2
3
4 4
Fig. 3
1 1
2 4
3
4
Newbie here and I don't know where to start... I'm trying to set up a macro to when data is pasted to a TEMPLATE worksheet tab it will automatically copy and paste data to another sheet based on the month value.
For example:
If data contains 06/01/2011 in cell A1, then data needs to be pasted to "Jun" worksheet within the same workbook.
Can someone assist or can give some direction? Thank you
For example:
If data contains 06/01/2011 in cell A1, then data needs to be pasted to "Jun" worksheet within the same workbook.
Can someone assist or can give some direction? Thank you
Dear Sirs,
Am in need for this solution very badly and what could be a better place than excelforum !
I have an MS Excel File (2007 version) sample file attached, which has name, designation, blood group and so on. The last column is for hyperlinking photographs of individuals.
In the same folder where I have saved this excel file, are lying photographs of individuals. While scanning the photographs, I have saved them serially i.e. 1,2,3 and so on.
In the Excel file, in last column, I have given the respective serial numbers. In order to hyperlink one has to select that particular Cell, press Ctrl K and you automatically go to the folder containing individual photographs, you select that photo and OK.
Problem :
I have to do this hyperlinking one by one and if there 1000 photos, lot of time is wasted.
Solution Needed :
Just in case of excel formula, which we copy and paste, Can I get a command by virtue of which the column titled Photo or column next to it gets automatically Hyperlinked to respective photo WHEN I copy and paste such command to all cells in that column.
Thanks a million and warm regards ::: Jack
Am in need for this solution very badly and what could be a better place than excelforum !
I have an MS Excel File (2007 version) sample file attached, which has name, designation, blood group and so on. The last column is for hyperlinking photographs of individuals.
In the same folder where I have saved this excel file, are lying photographs of individuals. While scanning the photographs, I have saved them serially i.e. 1,2,3 and so on.
In the Excel file, in last column, I have given the respective serial numbers. In order to hyperlink one has to select that particular Cell, press Ctrl K and you automatically go to the folder containing individual photographs, you select that photo and OK.
Problem :
I have to do this hyperlinking one by one and if there 1000 photos, lot of time is wasted.
Solution Needed :
Just in case of excel formula, which we copy and paste, Can I get a command by virtue of which the column titled Photo or column next to it gets automatically Hyperlinked to respective photo WHEN I copy and paste such command to all cells in that column.
Thanks a million and warm regards ::: Jack
Hello -
I am using Excel 2007. In prior versions of excel, when copying data, if I wanted to copy visible cells only, I would select "Go To, Special, Visible Cells Only" and then copy a range a cells. The default was always set to copy everything (including hidden cells), unless I specifically selected copy visible cells only.
In 2007, the default is somehow set to always copy only visible cells. Sometimes, I want to be able to copy all cells including those hidden but cannot seem to figure out how to swith this default option. I looked under Excel Options and did not see an option there.
I don't want to have to unhide and rehide everything each time i copy. I know i could do the hiding and unhiding via VBA but would prefer not to have to.
Thanks for your suggestions.
I am using Excel 2007. In prior versions of excel, when copying data, if I wanted to copy visible cells only, I would select "Go To, Special, Visible Cells Only" and then copy a range a cells. The default was always set to copy everything (including hidden cells), unless I specifically selected copy visible cells only.
In 2007, the default is somehow set to always copy only visible cells. Sometimes, I want to be able to copy all cells including those hidden but cannot seem to figure out how to swith this default option. I looked under Excel Options and did not see an option there.
I don't want to have to unhide and rehide everything each time i copy. I know i could do the hiding and unhiding via VBA but would prefer not to have to.
Thanks for your suggestions.
This is my first post in these forums.
I am trying to create a formula which will look at the data in columns A - I (50 rows) and copy this data to columns K - S but ignoring any blank cells. Thereby consolidating the data in the upper rows with no spaces.
I am sure there is a relativley simple answer but it is driving me mad!
Hope you "Guru's" can help
Thanks
Added example spreadsheet to aid assistance.
I am trying to create a formula which will look at the data in columns A - I (50 rows) and copy this data to columns K - S but ignoring any blank cells. Thereby consolidating the data in the upper rows with no spaces.
I am sure there is a relativley simple answer but it is driving me mad!
Hope you "Guru's" can help
Thanks
Added example spreadsheet to aid assistance.
In Excel there is a difference between cells that are blank (= "") and that are empty. You can make blank cells empty by selecting them and pressing the delete key, but I need a fast way to do this on all blank cells in a large worksheet. The only way I have found is with a VBA macro that loops through every cell, tests for '.Value = "" ' and then uses the '.Clear()' function, but doing this on 30 columns x 10000 rows is far too slow. Any solutions?
(The reason I need to do this is for importing into Access, the database treats empty cells as NULL which is what I want. Blank (but not empty) cells screw the import process up.)
(The reason I need to do this is for importing into Access, the database treats empty cells as NULL which is what I want. Blank (but not empty) cells screw the import process up.)
Hi
I am a new user and trying to setup a database in excel. I can select all addresses and copy but when trying to paste into excel it does so in 1 cell.
Is there a way I can paste the separate email id's into individual cells so I don't have to do it individually?
Many thanks
Patrick
I am a new user and trying to setup a database in excel. I can select all addresses and copy but when trying to paste into excel it does so in 1 cell.
Is there a way I can paste the separate email id's into individual cells so I don't have to do it individually?
Many thanks
Patrick
Is there a trick to copy-paste a group of cells into Outlook? I don't want to paste as a picture (shows up as an attachment and is lost when someone else Replies), but formatting is skewed when pasted as an Excel object. Right now I'm recreating the table in Word, then pasting, which doesn't loose formatting.
A specific problem is cells which don't have borders show up with very light grey borders in Outlook. This, I do not want.
TiA
A specific problem is cells which don't have borders show up with very light grey borders in Outlook. This, I do not want.
TiA
How do I restrict what I see on my screen (and specifically, limit the scroll
feature) to the rows and columns I'm actually using in an Excel 2003 Pro
spreadsheet?
feature) to the rows and columns I'm actually using in an Excel 2003 Pro
spreadsheet?
Hi there, longtime user firsttime poster. Looking for some help as I am a non-expert with macros. Here's what I'm trying to do:
We have to submit things to a certain regulatory body and we usually enter tasks in as soon as they come, do the submission, and then keep a record of that submission.
So, I have a workbook with two sheets, one is "TO DO", the other is "ARCHIVE". Both sheets have the same columns and everything. I am looking for a macro that will automatically cut a (row) from the TO DO sheet and paste it in into the ARCHIVE sheet once it is done, then delete the cut row from the TO DO list so it stays topped up.
The trigger for archiving is the columns M and N which are titled "Complete ?" and each has a validation drop down that says "YES". When both cells in columns M and N have the YES in them, I would like the macro to make the above mentioned actions.
I ran a search on the forums and found something similar, but not quite what I was looking for.
Any help?
We have to submit things to a certain regulatory body and we usually enter tasks in as soon as they come, do the submission, and then keep a record of that submission.
So, I have a workbook with two sheets, one is "TO DO", the other is "ARCHIVE". Both sheets have the same columns and everything. I am looking for a macro that will automatically cut a (row) from the TO DO sheet and paste it in into the ARCHIVE sheet once it is done, then delete the cut row from the TO DO list so it stays topped up.
The trigger for archiving is the columns M and N which are titled "Complete ?" and each has a validation drop down that says "YES". When both cells in columns M and N have the YES in them, I would like the macro to make the above mentioned actions.
I ran a search on the forums and found something similar, but not quite what I was looking for.
Any help?
I am looking for a formula to remove special characters (like ' , " & - ) in a sheet.
Thank you.
Thank you.
Hi-
I am brand new to Mr. Excel and would love some advice.
I searched the boards pretty extensively but could not find what I am looking for...I apologize if this is a duplicate.
I am using Excel 2007
How do you automatically add rows and update values for cells to a linked worksheet in which rows have been added? For example: Sheet 1, columns A & B are linked to Sheet 2, columns A & B. Sheet 2 has values in A1:A5 & B1:B5 and Sheet 1, since it is linked, has the same info. I want to add a row in between 3 & 4 on Sheet 2 and want Sheet 1 to automatically add the same row and update the value of the cell in column A & B.
Any help is greatly appreciated!
John
I am brand new to Mr. Excel and would love some advice.
I searched the boards pretty extensively but could not find what I am looking for...I apologize if this is a duplicate.
I am using Excel 2007
How do you automatically add rows and update values for cells to a linked worksheet in which rows have been added? For example: Sheet 1, columns A & B are linked to Sheet 2, columns A & B. Sheet 2 has values in A1:A5 & B1:B5 and Sheet 1, since it is linked, has the same info. I want to add a row in between 3 & 4 on Sheet 2 and want Sheet 1 to automatically add the same row and update the value of the cell in column A & B.
Any help is greatly appreciated!
John
I was testing the following methods (suggested in another thread) to disable copy/paste on a particular worksheet -- now copy and paste is disabled entirely from Excel and, apparently, from each and every excel workbook I've got. HELP!!!!!
http://www.xcelfiles.com/VBA_Quick13.html
http://www.mrexcel.com/archive2/75500/87639.htm
Taxstar
http://www.xcelfiles.com/VBA_Quick13.html
http://www.mrexcel.com/archive2/75500/87639.htm
Taxstar
Hi all,
I hope you can help me with what I would like to do. I've searched and searched and not come up with anything yet!!
I have one sheet which is my 'data' sheet with a number of columns, one of which is a date which may be repeated.
I then want to use another sheet with two cells where two dates can be entered and a button which allows you to copy the rows of data from the data sheet which have dates between the two specified originally. The list in the data sheet may not be in date order although I could update a macro to do this for me if needed. I would also like to do it so that if "ALL" is typed in the date fields, it pulls over ALL the data. (Or something similar)
Any help you can give would be much appreciated.
Cheers,
Kevin
I hope you can help me with what I would like to do. I've searched and searched and not come up with anything yet!!
I have one sheet which is my 'data' sheet with a number of columns, one of which is a date which may be repeated.
I then want to use another sheet with two cells where two dates can be entered and a button which allows you to copy the rows of data from the data sheet which have dates between the two specified originally. The list in the data sheet may not be in date order although I could update a macro to do this for me if needed. I would also like to do it so that if "ALL" is typed in the date fields, it pulls over ALL the data. (Or something similar)
Any help you can give would be much appreciated.
Cheers,
Kevin