Sort Table With Merged Cells And Some Empty Rows |
Sort Table With Merged Cells And Some Empty Rows - Excel |
|
The attached example is a copy from a workbook i am working on and what i want to with the table is be able to sort the table in ascending order by any of the given columns through option buttons.
My problems are, 1) the cells are merged and of different sizes so i get an error message when trying to sort these merged cells because they are of different sizes and 2) the number of rows in the table will not always be used and if i unmerge the cells and sort the table then empty rows go to the top of the table and i want them to stay at the bottom.
Any help will be much appreciated .
Thanks,
Adam.
My problems are, 1) the cells are merged and of different sizes so i get an error message when trying to sort these merged cells because they are of different sizes and 2) the number of rows in the table will not always be used and if i unmerge the cells and sort the table then empty rows go to the top of the table and i want them to stay at the bottom.
Any help will be much appreciated .
Thanks,
Adam.
Excel VBA Course - From Beginner to Expert
200+ Video Lessons 50+ Hours of Instruction 200+ Excel Guides
Become a master of VBA and Macros in Excel and learn how to automate all of your tasks in Excel with this online course. (No VBA experience required.)
(80% Discount Ends Soon!)
Similar Topics
In my pivot table I have a lot of cells without any data. The report looks like garbage with all the (BLANK) sohowing up in the report.
I've tried condtional formatting where if the cells = (BLANK) it woulf format them as white -did not work
I tried the pivot table options and clicking on the box "for empty cells show" and set it to 0 then empty but that did not work.
any Ideas???
Thanks
I've tried condtional formatting where if the cells = (BLANK) it woulf format them as white -did not work
I tried the pivot table options and clicking on the box "for empty cells show" and set it to 0 then empty but that did not work.
any Ideas???
Thanks
I would like to copy a small table from Word into one cell in an Excel
worksheet. The first column of the table is a list of numbers. I tried
converting the table into text with manual line breaks and tab stops to
divide columns and rows, but that didn't solve my problem.
Excel pastes the data into several rows. When I try to merge them, I
get a warning that the selection contains multiple data values, and
merging into one cell keeps the upper-left most data only.
What I tried that didn't work:
* Formatting the Excel cells as text before pasting the data.
* The various options for "Paste Special." The closest I got was
inserting the table as a Document Object, which could be a workaround,
I guess.
What I am saving for when all else fails:
* The obvious solution of copying row by row into one Excel cell.
The data in the table is information about my dad's medications. I
would like to have reference charts of how to identify the strength of
each tablet by its color and markings. I got the info from the
manufacturers' websites and entered it into tables in Word, which I
would like to copy into a more comprehensive file I am creating in
Excel. The first column of each table is the strength of the tablet,
entered as 1 mg., 2 mg., etc. The subsequent columns describe the
shape, color, and markings. There are 3 tables, each with about 4-5
rows.
Is there a way to copy each one - whether as a table or as text - into
a single Excel cell without losing data?
Many thanks.
worksheet. The first column of the table is a list of numbers. I tried
converting the table into text with manual line breaks and tab stops to
divide columns and rows, but that didn't solve my problem.
Excel pastes the data into several rows. When I try to merge them, I
get a warning that the selection contains multiple data values, and
merging into one cell keeps the upper-left most data only.
What I tried that didn't work:
* Formatting the Excel cells as text before pasting the data.
* The various options for "Paste Special." The closest I got was
inserting the table as a Document Object, which could be a workaround,
I guess.
What I am saving for when all else fails:
* The obvious solution of copying row by row into one Excel cell.
The data in the table is information about my dad's medications. I
would like to have reference charts of how to identify the strength of
each tablet by its color and markings. I got the info from the
manufacturers' websites and entered it into tables in Word, which I
would like to copy into a more comprehensive file I am creating in
Excel. The first column of each table is the strength of the tablet,
entered as 1 mg., 2 mg., etc. The subsequent columns describe the
shape, color, and markings. There are 3 tables, each with about 4-5
rows.
Is there a way to copy each one - whether as a table or as text - into
a single Excel cell without losing data?
Many thanks.
How do I sort but have the other data move with the column I'm sorting? Whenever I sort, for example, by name, the address and phone numbers columns stay the same and are therefore incorrect with the newly sorted columns. I've looked everywhere.
Good Morning Folk
Is there a way to sort a list of names alphabetically and put any blank cells to the bottom rather than the top
Cheers Jim
Is there a way to sort a list of names alphabetically and put any blank cells to the bottom rather than the top
Cheers Jim
In Excel there is a difference between cells that are blank (= "") and that are empty. You can make blank cells empty by selecting them and pressing the delete key, but I need a fast way to do this on all blank cells in a large worksheet. The only way I have found is with a VBA macro that loops through every cell, tests for '.Value = "" ' and then uses the '.Clear()' function, but doing this on 30 columns x 10000 rows is far too slow. Any solutions?
(The reason I need to do this is for importing into Access, the database treats empty cells as NULL which is what I want. Blank (but not empty) cells screw the import process up.)
(The reason I need to do this is for importing into Access, the database treats empty cells as NULL which is what I want. Blank (but not empty) cells screw the import process up.)
Also, I cannot move the Pivot Table from the new Worksheet it is created in, to my existing Worksheet.
I am running Excel 2011 for Mac.
I have a Worksheet with a small amount of data, and when I click the Pivot Table button it automatically creates the Pivot Table in a new Worksheet. The Pivot Table data is fine, but I want it to display alongside the source data.
I've tried using the Move Pivot Table option and choosing to Create Pivot Table in Existing Worksheet and choosing a source cell alongside my current data, but nothing appears. Also, I checked in Edit menu and found that the Pivot Table appears to have not even been created/moved because there is no option to undo it.
Appreciate any help, let me know if you have any further questions.
Hunter
I am running Excel 2011 for Mac.
I have a Worksheet with a small amount of data, and when I click the Pivot Table button it automatically creates the Pivot Table in a new Worksheet. The Pivot Table data is fine, but I want it to display alongside the source data.
I've tried using the Move Pivot Table option and choosing to Create Pivot Table in Existing Worksheet and choosing a source cell alongside my current data, but nothing appears. Also, I checked in Edit menu and found that the Pivot Table appears to have not even been created/moved because there is no option to undo it.
Appreciate any help, let me know if you have any further questions.
Hunter
Hi,
Can someone please help? I've got quite a lot of data that I want to sort
by the persons date of birth, but because I have cells with formula in it
(this works out the persons age) the sort function is changing the formulas
so the formulas no longer work becuase it changes the cell where it is
getting the data from. Does anyone have any ideas how this could be fixed??
Thanks!
Can someone please help? I've got quite a lot of data that I want to sort
by the persons date of birth, but because I have cells with formula in it
(this works out the persons age) the sort function is changing the formulas
so the formulas no longer work becuase it changes the cell where it is
getting the data from. Does anyone have any ideas how this could be fixed??
Thanks!
Good mornng - I am new to the forum - my name is Jena
My question is this - I have a large spreadsheet with multiple columns of information. I want to sort it by a certain column. I know how to do this. My question is, once I'm done with my work I want to sort it back to the original "sort" but I'm not sure how they have it sorted. I've tried to figure out how they have it sorted but can't. Is there some way to go back to the original sort?
Thank you for your anticipated help.
Jena
My question is this - I have a large spreadsheet with multiple columns of information. I want to sort it by a certain column. I know how to do this. My question is, once I'm done with my work I want to sort it back to the original "sort" but I'm not sure how they have it sorted. I've tried to figure out how they have it sorted but can't. Is there some way to go back to the original sort?
Thank you for your anticipated help.
Jena
Hi Professionals,
I have just tried running the following code
Code:
in the hope that it might 'unfilter' my table but it literally doesn't do a thing!
My table is called Activity_Table
Can you provide me with something that will 'unfilter' my table if it is filtered on any or all 6 columns?
Help appreciated,
Dominic
I have just tried running the following code
Code:
Dim ws As Worksheet For Each ws In ThisWorkbook.Sheets With ws If .FilterMode Then .ShowAllData End With Next ws
in the hope that it might 'unfilter' my table but it literally doesn't do a thing!
My table is called Activity_Table
Can you provide me with something that will 'unfilter' my table if it is filtered on any or all 6 columns?
Help appreciated,
Dominic
I have a merged cell which contains a text with multiple lines.
I want to split the lines into multiple rows.Each line should come in a different row.
I want to do this using macro.Is there is anyway to do this?
There is an option to split the cell into multiple cells on the basis of the delimiter, but there is no option to split them into rows.
I want to split the lines into multiple rows.Each line should come in a different row.
I want to do this using macro.Is there is anyway to do this?
There is an option to split the cell into multiple cells on the basis of the delimiter, but there is no option to split them into rows.
Hi,
I'd like help in creating a macro that deletes an entire row that has emtpy cells in col B, C & D in the same row.
So for example if I have empty cells in b3,c3 & d3 I'd like the row deleted.
I've used the code below for just column B but I need to include column C & D as well. I tried putting Columns("B:D") but it deletes everything.
Code:
I'm sure it's something simple... like me !
Any help much appreciated
Wrightie
I'd like help in creating a macro that deletes an entire row that has emtpy cells in col B, C & D in the same row.
So for example if I have empty cells in b3,c3 & d3 I'd like the row deleted.
I've used the code below for just column B but I need to include column C & D as well. I tried putting Columns("B:D") but it deletes everything.
Code:
Sub Step4()
On Error Resume Next
Columns("B:B").SpecialCells(xlCellTypeBlanks).EntireRow.Delete
End Sub
I'm sure it's something simple... like me !
Any help much appreciated
Wrightie
Is there a trick to copy-paste a group of cells into Outlook? I don't want to paste as a picture (shows up as an attachment and is lost when someone else Replies), but formatting is skewed when pasted as an Excel object. Right now I'm recreating the table in Word, then pasting, which doesn't loose formatting.
A specific problem is cells which don't have borders show up with very light grey borders in Outlook. This, I do not want.
TiA
A specific problem is cells which don't have borders show up with very light grey borders in Outlook. This, I do not want.
TiA
Hey there,
I have been tasked with introducing userforms into an excel sheet and tbh I'm quite amazed that excel has this capability of adding userforms to excel sheets.
Anyway, I have 2 columns of data in an excel sheet and I wish to add this to a userform so that the userform displays the 2 columns beside each other with headings, like a table. The user should then be able to select a particular row and insert it into the specified cell.
I would also like the user to select a row on the table and then be able to bring up another table depending on the row selected...basically so that the user can draw deeper into the information that they require.
I have an example excel sheet where I have 2 sheets. One sheet is the user entry sheet called User Entry Screen. the next sheet is the tables sheet where my tables are held. Once the user selects the cell shown in the example sheet, it should then bring up the user form. the user then, depending on which item clicked, then gets shown the next window with a table and info on it. then user should then be able to select an item and the cells on the user entry screen would then get populated.
Personally I think this is a really tricky challenge and any help with doing this would be extremely appreciated.
I'll post up further comments as I am trying to work my way through it!
Thanks,
Jag
I have been tasked with introducing userforms into an excel sheet and tbh I'm quite amazed that excel has this capability of adding userforms to excel sheets.
Anyway, I have 2 columns of data in an excel sheet and I wish to add this to a userform so that the userform displays the 2 columns beside each other with headings, like a table. The user should then be able to select a particular row and insert it into the specified cell.
I would also like the user to select a row on the table and then be able to bring up another table depending on the row selected...basically so that the user can draw deeper into the information that they require.
I have an example excel sheet where I have 2 sheets. One sheet is the user entry sheet called User Entry Screen. the next sheet is the tables sheet where my tables are held. Once the user selects the cell shown in the example sheet, it should then bring up the user form. the user then, depending on which item clicked, then gets shown the next window with a table and info on it. then user should then be able to select an item and the cells on the user entry screen would then get populated.
Personally I think this is a really tricky challenge and any help with doing this would be extremely appreciated.
I'll post up further comments as I am trying to work my way through it!
Thanks,
Jag
I have a very simple pivot table that I am trying to use as a data source for a VLOOKUP request. Unfortunately, every time I do it I get the result #NA. I have tried recreating the results from the pivot table in the worksheet next to it, and am able to use VLOOKUP on them successfully, but as soon as I point the VLOOKUP array to the pivot table, I get the #NA result
Can VLOOKUP be used on pivot tables? If so, is there any special syntax I need to use?
Thanks
Can VLOOKUP be used on pivot tables? If so, is there any special syntax I need to use?
Thanks
I am having trouble with a sort. I would like a list sorted descending, so that the highest dollar amount is at the top. However, if there are blanks or zeros in the list, it is putting those first. How do I get it to ignore them or put them at the bottom?
Thank you,
Liz
Thank you,
Liz
Hi,
I made a budget with many narrow columns and have turned the data into a table. I will only ever filter the data with the left-hand most column. However, all the other columns are filled each with the grey drop-down filter arrow button, and I can no longer see the headings of these columns and frankly seeing 50 little unused arrow buttons is rather ugly. Is there any way to simply remove the filter drop-down buttons on some columns or even all of them, just leaving a filter button at the heading of the first column? I know I can hide the headings, but then I lose sight of the first filter arrow that I use.
Sorry to ask such a bizarre question, but I appreciate your help.
Thanks
I made a budget with many narrow columns and have turned the data into a table. I will only ever filter the data with the left-hand most column. However, all the other columns are filled each with the grey drop-down filter arrow button, and I can no longer see the headings of these columns and frankly seeing 50 little unused arrow buttons is rather ugly. Is there any way to simply remove the filter drop-down buttons on some columns or even all of them, just leaving a filter button at the heading of the first column? I know I can hide the headings, but then I lose sight of the first filter arrow that I use.
Sorry to ask such a bizarre question, but I appreciate your help.
Thanks
I have a workbook with 50 sheets (1 for each employee).
How can I get Excel to sort these into alphabetical order ?
(From kyeoward@hotmail.com)
How can I get Excel to sort these into alphabetical order ?
(From kyeoward@hotmail.com)
I feel like this should be really easy and I am just out of it today but I cannot figure this out. I want to lock a row and filter (with filter,not sort, tool) the other rows. I attached an example
The row in RED I want to never be changed or added in the filter, but I want row 2 and 1 to filter together. So I want (in this case) the flavor to filter with the same number. SO i guess the filter process would be dependent upon the total number of votes. Any ideas? Thanks!
I had to create the information in tables and went from there. Got it. Thanks!
The row in RED I want to never be changed or added in the filter, but I want row 2 and 1 to filter together. So I want (in this case) the flavor to filter with the same number. SO i guess the filter process would be dependent upon the total number of votes. Any ideas? Thanks!
I had to create the information in tables and went from there. Got it. Thanks!
I often use if statements to return empty cells, for example:
=IF(a1=0,"ERROR","")
The trailing "" returns an empty cell. The problem is, it is not TRULY empty. If I fill that formula down, I cannot, for example, jump from one "ERROR" cell to the next by hitting Ctrl arrow-down because it seems to think that these empty cells have contents.
Is there a way to designate, in such a formula as above, to return a TRULY empty cell?
Thanks
=IF(a1=0,"ERROR","")
The trailing "" returns an empty cell. The problem is, it is not TRULY empty. If I fill that formula down, I cannot, for example, jump from one "ERROR" cell to the next by hitting Ctrl arrow-down because it seems to think that these empty cells have contents.
Is there a way to designate, in such a formula as above, to return a TRULY empty cell?
Thanks
Hi,
Recently, I find that the Pivot Table toolbar does not show up when I activate it. I have reinstalled Excel but it still does not show up when I activate it in the Pivot Table. Can someone advise me on what settings I shoudl do to turn it on again ? Thanks.
Recently, I find that the Pivot Table toolbar does not show up when I activate it. I have reinstalled Excel but it still does not show up when I activate it in the Pivot Table. Can someone advise me on what settings I shoudl do to turn it on again ? Thanks.