Vba Add Guid References

Hello

I'm quite experienced Excel user. I've never come across this problem but tinkering in every conceivable way within Excel settings and the solution has eluded me.

I have added a worksheet created elsewhere (it is a form I need printing, with the data coming from 2 sheets I have created from scratch) which has pre formatted cells for Date and Client Name etc.

When I try to reference the cell in this added sheet from my 2 sheets, instead of the result, it always displays the formula, not the result.

I have tried doing it from one of my sheets to reference to this new, and that displays the result and not formula. I can't imagine why it's doing this and I've never seen it happen before.

Formatting cells, giving cells names rather than the usually adequate of reference to the Cell Number doesn't change things. I wonder if I've picked up some legacy protection from the original form but can't see anywhere in the tools etc that's obvious.

There's about 50+ cells that need referencing and I got to get this done for work.

Please help me. This is my first need to post on a Excel Forum as I've always found help or answers from other peeps or internet but this one is making me scratch my head big time.

Hi all,

I've had a long search through your pages to see if this question has been answered before but having browsed through about 50 pages worth of threads I couldn't see anything, but if I am repeating prior information I do apologise.

I've written a macro that is relatively simple. It just takes some information in one format, rearranges it, adds some formatting and performs some calculations. Nothing incredibly fancy but it works fine on my computer.

Now, I need to share this macro with some other people, so basically I've just sent that excel file on to the people that need to use it. Should be fine and in most cases it is, however there is one user who although they can open the file, can't seem to get the macro to run properly.

It seems to get a small way through the macro but then stop with no error messages or any sign that it hasn't completed properly.

I have checked Macro Security level and that is the same as mine, Tools - Add-Ins is the same, In Visual Basic, Tools - References is the same as mine. It is the same Operating system and the same version of Excel.

I have even signed into this person's computer as myself (it's a big company network thing) and tried to run the macro and it works fine, so there is nothing wrong with the hardware.

I've googled and searched and tried everything I can think of but I'm no closer to solving this problem, so if anyone has read through this wall of text and can come up with a possible solution, that would be greatly appreciated to save me from tearing ALL my hair out!

Thanks very much for your time.

I have an image or picture within a worksheet.

I want to be able to reference it from a cell so that depending on a
validation list a different picture is shown.

Is this possible in Microsoft Exec 2000

Hi,

Someone once showed me how if you have a a reference to a cell in one sheet
you could double click on the cell and it would jump to the referenced cell
in the reference cell's sheet.

For example.

Cell With Reference Referenced Cell in other
Sheet
A1 <--double click sheet1 cell A1 takes you to --> =Sheet2!A1

I would like to create a formula that removes a specific character if it appears in a cell. In this case, if the text in the name cell starts with * or #, remove it. Otherwise, keep the contents intact. Examples:

Code:

Text in Cell     Desired Results
*Bobby Abreu      Bobby Abreu
#Erick Aybar      Erick Aybar
Jason Bartlett    Jason Bartlett

Is there a formula that will get me where I want to be?

Thanks!

Chuck

Is there an on error exit sub command. I would like my Macro to just stop running if there is an error instead of an error message popping up. Thanks in advance

I have an Excel workbook that was created by a former coworker. It includes a macro that, among other things, displays a message box about the 2008 file. The macro runs as soon as the file is opened. I'd like to access that macro to correct the date to 2011 and see what else, if anything, it's doing for me (it doesn't appear to do much). I can find references to creating macros to hide and unhide rows/columns and I found ways to delete all macros in a workbook, but I cannot find anything about unhiding a macro without knowing its name.

Does anyone know of a way to unhide this macro?

Thanks!

Hi all,

I've been getting this error on occasion recently.

- It's a shared document
- There is usually 10-12 people using the file at the same time

I've read on the Microsoft Help site that the issue is that somebody is accessing the file while another is trying to open it.

Is there a way, perhaps through VBA, that I can not allow a user to save while somebody else is opening the document? Other suggestions on how to avoid this error?

Thanks!

Thought I'd append my experience of the above problem - you can find all sorts of references to it everywhere.

My problem was that a userform defined with Excel at work (containing DT pickers) gave the message in the title when opening it at home. I had a light-bulb moment and wondered whether there was a difference in the version numbers for MSCOMCT2.OCX at work and at home. Turned out the work version was newer. I then copied the MSCOMCT2.* files from work, made a backup of them at home and copied those from work to my C-drive (Windows XP - c:\windows\system32\ ).

No luck. I then rebooted the machine - still no luck.
Then, finally I unregistered the old DLL via
Code:

regsvr32 /u c:\windows\system32\MSCOMCT2.OCX

(not sure if this was necessary, but I didn't think it could hurt). Reregistered the DLL via
Code:

regsvr32 c:\windows\system32\MSCOMCT2.OCX

and what do you know - it worked.

Summa summarum - it could be an idea to check whether the two machines have different version numbers for the MSCOMCT2.OCX files.

I am trying to insert a range of cell in the body of an outlook email with the same format. The code I am using now is below and it does insert anything in the email body.

Code:

Sub Mail()
Dim OutApp As Object
    Dim OutMail As Object
    Set OutApp = CreateObject("Outlook.Application")
    OutApp.Session.Logon
    Set OutMail = OutApp.CreateItem(0)
    On Error Resume Next
    With OutMail
        .To = "cbelcher@jpfryelaw.com"
        .CC = ""
        .BCC = ""
        .Subject = "Burden Report"
        .Body = ActiveSheet.Range("A1:D12")
        .Attachments.Add ("C:\Documents and   Settings\cbelcher\Desktop\Burden Report.xls")
End With
    On Error GoTo 0
    Set OutMail = Nothing
    Set OutApp = Nothing
    Set objMsg = Nothing
End Sub

I have sheet with rows and each row has formulas based on cells in that row.
I would like to have a new row automatically inserted with the formulas
updating to reference the cells in the new row. Let's say I start with 50
rows and after they are filled up, a new row is added automatically? How do I
do this?

Hello,

I have a number of different files that I often need to run a macro on. In order for me to do it on the 75-100 files I have at any given time, I need to open one, run the macro, close and save, then open the next one.

Is it possible to write a macro that will start with the first file in a folder, open it and update links, run a macro, save and close, and open the next file in the folder until it has open all the files in the folder.

I have experience with creating macros that reference different workbooks, but not sure how to go about opening files with different filenames (without referencing the exact filename).

I'd like to be able to have basic code for opening, saving and closing, opening next file, saving and closing, etc. and input the macro I'd need to run in each file in the appropriate location. Is this possible? Any help is greatly appreciated!!

Thanks,
Jason

I know I can put a $ sign for all references in a formula for a cell by pressing F4, but is there a quick way for doing this for multiple cells (e.g. a column) or do I have to go through all the cells individually?

e.g.
=A1
=A2
=A3

to

=$A$1
=$A$2
=$A$3

Thanks

I'm trying to use VBA to go to a website that requires a User Name, Password, and a Submit Button.

So far I can get everything to work besides the Submit part. The code runs without errors, but doesn't actually "hit" the submit button on the webpage.

For posting, I removed my actual user name and password and and used the generic " User Name " and " Password " highlighted in blue.

I highlighted another section in green that I took from a previous post hoping it would solve my problem. The link is: http://www.mrexcel.com/forum/showthr...xplorer+submit


Here is the code I am using:

Sub GoToWebSiteAndPlayAroundNew()

Dim appIE As Object ' InternetExplorer.Application
Dim URL As String


Set appIE = CreateObject("InternetExplorer.Application")
URL = " https://efolio.morgankeegan.com/escripts/defaultLogon.asp?errCode=2 "


With appIE
.navigate URL
.Visible = True

Do While .busy: DoEvents: Loop
Do While .ReadyState 4: DoEvents: Loop

.document.getelementbyid("fUserName").Value = " UserName "
.document.getelementbyid("fPassword").Value = " Password "

End With


On Error Resume Next
x = 0
For Each mitem In IE.document.all
mitem.Value = "x"
x = x + 1
Next

x = 0
For Each mitem In IE.document.all
If x = "Submit" Then
mitem.Click
Exit For
End If

Next

End Sub

How can i solve a debugger error that states "run-time error '9'...Subscript out of range.

for a search box code provided by Joe Was