Importing Named Ranges In Ms Query

I'm trying to come up with a solution to calculate the man hours and days worked over multiple sheets.

I have a file that has 8 sheets. the first seven sheets are the days of the week and the 8th sheet is where I want to calculate the hours.

The days of the week consists of "Name" "Date" Hours"

The 8th sheet consists of "Name", "Days of the week in their own column (7 columns in total)", "Total Hours" and "Total Days Worked"

Now... each day is always a different group and what I'm hoping for is to create a formula that can grab each name with their hours and throw them into the 8th sheet. So when the end of the week is done I have all the Employees weekly hours and days worked all finished.

I hope this makes sense. This file is to track about 100 employees that are on a rotational work schedule.

I have attached a sample file.

Thanks in advance for your help.

Hello, I'm trying to count the number of times a name appears across multiple worksheets but I can't seem to figure it out.


I have 6 sheets to count and all the names are in column A (from A1:A100) on each sheet. The names are not in a particular order.

On sheet 7 I want to have a cell beside each persons name that counts the number of times their name appeared on the other 6 sheets.

For example Sheet 7 (called total) would have

Joe 5 (where 5 is the outcome of the formula I'm looking for to count all the times "Joe" appears on sheets 1-6).

I have it counting per sheet with =COUNTIF(A1:A130,"name") but this is not quite what I am looking for.

Thanks in advance for any advice.


Edit: I am using Excel 2007 w/ windows XP

I am using XL2007 and have a macro that refreshes microsoft query connections. The issue is the refreshes only happen if you step through the macro using the debugger. When you run the macro normally, everything else functions properly, but the data is not refreshed.

Any help is appreciated. Here is an excerpt of the code:


Workbooks.Open Filename:="C:\Profile.xls"
Sheets("SELECTION").Select
Range("F3").Value = SNR

' THIS PART ONLY WORKS IF YOU STEP THROUGH THE MACRO USING THE DEBUGGER...IF YOU RUN MACRO NORMALLY THE CONNECTIONS DO NOT REFRESH
ActiveWorkbook.Connections("Connection").Refresh
ActiveWorkbook.Connections("Connection14").Refresh
ActiveWorkbook.Connections("Query from C_Profile").Refresh
ActiveWorkbook.Connections("Query from C_Profile1").Refresh

Hi,

This is a very basic question, but i have been struggling for hours, so I must ask.

I I trying to simply fill a combobox on a userform from a named range on a sheet, I want to populate the combobox as soon as the userform starts. (I launch the userform from a button on the sheet) Where must I place the code? and will this code work?
Code:

Sub Button1_Click()
Set UserForm1.combobox1.List = Sheets("Sheet1").Range("MyRange")
UserForm1.Show
End Sub

I am very new to vba, so please excuse my ignorance,
any help would be greatly appreciated

regards
jim

I have a very simple pivot table that I am trying to use as a data source for a VLOOKUP request. Unfortunately, every time I do it I get the result #NA. I have tried recreating the results from the pivot table in the worksheet next to it, and am able to use VLOOKUP on them successfully, but as soon as I point the VLOOKUP array to the pivot table, I get the #NA result

Can VLOOKUP be used on pivot tables? If so, is there any special syntax I need to use?

Thanks

Hey there,

I have been tasked with introducing userforms into an excel sheet and tbh I'm quite amazed that excel has this capability of adding userforms to excel sheets.

Anyway, I have 2 columns of data in an excel sheet and I wish to add this to a userform so that the userform displays the 2 columns beside each other with headings, like a table. The user should then be able to select a particular row and insert it into the specified cell.

I would also like the user to select a row on the table and then be able to bring up another table depending on the row selected...basically so that the user can draw deeper into the information that they require.

I have an example excel sheet where I have 2 sheets. One sheet is the user entry sheet called User Entry Screen. the next sheet is the tables sheet where my tables are held. Once the user selects the cell shown in the example sheet, it should then bring up the user form. the user then, depending on which item clicked, then gets shown the next window with a table and info on it. then user should then be able to select an item and the cells on the user entry screen would then get populated.

Personally I think this is a really tricky challenge and any help with doing this would be extremely appreciated.

I'll post up further comments as I am trying to work my way through it!

Thanks,

Jag

Also, I cannot move the Pivot Table from the new Worksheet it is created in, to my existing Worksheet.

I am running Excel 2011 for Mac.

I have a Worksheet with a small amount of data, and when I click the Pivot Table button it automatically creates the Pivot Table in a new Worksheet. The Pivot Table data is fine, but I want it to display alongside the source data.
I've tried using the Move Pivot Table option and choosing to Create Pivot Table in Existing Worksheet and choosing a source cell alongside my current data, but nothing appears. Also, I checked in Edit menu and found that the Pivot Table appears to have not even been created/moved because there is no option to undo it.

Appreciate any help, let me know if you have any further questions.

Hunter

Is it possible to import a single text file into Excel, splitting the incoming data across multiple worksheets rather than a single worksheet? Each each row on the text file would be evaluated by the value in one of it's "columns" and written to the appropriate worksheet. The file is "!" delimited and has 11 columns for each row.

Currently, I import the file into one worksheet and cut/paste the rows manually into new worksheets/tabs. The files are very large, sometimes exceeding the 65,536 row limit, which I could avoid if the data was split out coming in.

Any help anyone could provide would be WONDERFUL. Thanks!

I would like to copy a small table from Word into one cell in an Excel
worksheet. The first column of the table is a list of numbers. I tried
converting the table into text with manual line breaks and tab stops to
divide columns and rows, but that didn't solve my problem.

Excel pastes the data into several rows. When I try to merge them, I
get a warning that the selection contains multiple data values, and
merging into one cell keeps the upper-left most data only.

What I tried that didn't work:
* Formatting the Excel cells as text before pasting the data.
* The various options for "Paste Special." The closest I got was
inserting the table as a Document Object, which could be a workaround,
I guess.
What I am saving for when all else fails:
* The obvious solution of copying row by row into one Excel cell.

The data in the table is information about my dad's medications. I
would like to have reference charts of how to identify the strength of
each tablet by its color and markings. I got the info from the
manufacturers' websites and entered it into tables in Word, which I
would like to copy into a more comprehensive file I am creating in
Excel. The first column of each table is the strength of the tablet,
entered as 1 mg., 2 mg., etc. The subsequent columns describe the
shape, color, and markings. There are 3 tables, each with about 4-5
rows.

Is there a way to copy each one - whether as a table or as text - into
a single Excel cell without losing data?

Many thanks.

Hi,
I need the necessity do delete a sequence of sheets in my workbook.
If I use this code:

With ActiveWorkbook
If .Worksheets.Count >= 5 Then
For n = 5 To .Worksheets.Count
Worksheets(n).Delete
Next n
End If
End With

I receive a confirmation message box with this message:

"Data may exist in the sheet(s) selected for deletion. To permanently delete the data, press Delete" [DELETE] [CANCEL]

I wish to delete all sheets without receiving any message.

Is it possible?

Many thanks in advance for your kind support.

Regards,

Giovanni

Hi everyone,

I found an excellent macro this morning that allows the user to filter a pivot table based on the value found in a specific cell. This cell essentially acts as a search bar, allowing the user to type in what they are looking for rather than select it from a drop-down list.

The macro works perfectly for my purposes except in one regard: I can no longer perform a "show all" filter. If I leave the "search bar" cell blank, the pivot table shows nothing. I'm sure that there is an easy fix for this but I'm still learning the basics of how to write and use macros. How can I change the code so that when I leave the cell blank, the pivot table shows all? The search bar cell is D2.

Thanks for your time!

I have never really used VBA and so am completely stuck at this problem. I need to create a macro which auto-populates a master worksheet from the individual user sheets in a shared workbook.

Sheet 1 is the master sheet "Team Stats". There will be an undetermined number of individual worksheets to accomodate new staff.

Each worksheet will be identical, using columns A-I with row 1 having the headings:

Date, Name, Reference, Value, Price, Age, Purchased?, Destination, Add. Products (the last 3 columns will have a drop-down list which will be used to enter data into the cell).

There will be a varying number of rows in each of the individual sheets.

If possible I would like the macro to run every time data is entered into one of the individual worksheets. If this is not then it would be fien to update every time the workbook is opened.

If anyone can help it would really cut down the time I spend collating these stats every day!

Hello,

Is there a way to create a second worksheet that is based on data from an original sheet that will automatically update when you ADD ROWS to the original sheet?

Linking values between sheets is easy... but I need to be able to set a designated area on my A sheet that I can add rows into which will automatically be added to my B sheet.

Does anyone know of a function that I can apply for this?

I get the error message "reference is not valid" each time I open my spreadsheet. I get this message three times, and once I am done clicking ok on all three of them, my spreadsheet works just fine. The problem is, I have to send it to a bunch people.

I have a sheet with raw data a sheet with pivot tables a sheet with a dashboard and a simple macro
I don't have any #REF cells either.

Someone has any idea of what could be the problem?

thanks

NA

I have a Workbook with 2 sheets, the first one is the data entry and the second one contains all the calculations and confidential info.
I have one staff member that does the data entry but I don't want them to see the 2nd sheet. I know I can hide the sheet then protect the entire workbook which does work, but is there an easier way so that the second person doesn't have to keep hiding/unhiding the 2nd sheet?
It would be perfect if when you tried to click on Sheet2, it asked for a password.
Cheers
Jase