Print Certain Sheets From A User Form |
Print Certain Sheets From A User Form - Excel |
|
Thanks!
Similar Topics
Code:
Private Sub btn1_Click() UserForm1.PrintForm End Sub
This prints out the userform as I would like, however it autoprints to the default printer and doesn't allow any printing options so I can't select to "print to one page". So as of now it is only printing out half my form and cutting off the rest.
Any suggestions?
Sheet 1 is the master sheet "Team Stats". There will be an undetermined number of individual worksheets to accomodate new staff.
Each worksheet will be identical, using columns A-I with row 1 having the headings:
Date, Name, Reference, Value, Price, Age, Purchased?, Destination, Add. Products (the last 3 columns will have a drop-down list which will be used to enter data into the cell).
There will be a varying number of rows in each of the individual sheets.
If possible I would like the macro to run every time data is entered into one of the individual worksheets. If this is not then it would be fien to update every time the workbook is opened.
If anyone can help it would really cut down the time I spend collating these stats every day!
Found the following code and it gets me close, but it copies the cell references, not the values. It also allows me to specify the file name from a cell reference.
I want the new workbook file to simply be saved, not opened, and a message box to display stating where the file was saved (will always be in the same location on the LAN).
What modifications do I make to this to get this to work per above requirements?
Sub CopyMe()
Dim SaveMeAs As String
SaveMeAs = Sheets("Sheet1").Range("B2").Text
Sheets("Sheet3").Copy
ActiveWorkbook.SaveAs Filename:="C:\My Documents\" & SaveMeAs
End Sub
We have to submit things to a certain regulatory body and we usually enter tasks in as soon as they come, do the submission, and then keep a record of that submission.
So, I have a workbook with two sheets, one is "TO DO", the other is "ARCHIVE". Both sheets have the same columns and everything. I am looking for a macro that will automatically cut a (row) from the TO DO sheet and paste it in into the ARCHIVE sheet once it is done, then delete the cut row from the TO DO list so it stays topped up.
The trigger for archiving is the columns M and N which are titled "Complete ?" and each has a validation drop down that says "YES". When both cells in columns M and N have the YES in them, I would like the macro to make the above mentioned actions.
I ran a search on the forums and found something similar, but not quite what I was looking for.
Any help?
I need the necessity do delete a sequence of sheets in my workbook.
If I use this code:
With ActiveWorkbook
If .Worksheets.Count >= 5 Then
For n = 5 To .Worksheets.Count
Worksheets(n).Delete
Next n
End If
End With
I receive a confirmation message box with this message:
"Data may exist in the sheet(s) selected for deletion. To permanently delete the data, press Delete" [DELETE] [CANCEL]
I wish to delete all sheets without receiving any message.
Is it possible?
Many thanks in advance for your kind support.
Regards,
Giovanni
I have been tasked with introducing userforms into an excel sheet and tbh I'm quite amazed that excel has this capability of adding userforms to excel sheets.
Anyway, I have 2 columns of data in an excel sheet and I wish to add this to a userform so that the userform displays the 2 columns beside each other with headings, like a table. The user should then be able to select a particular row and insert it into the specified cell.
I would also like the user to select a row on the table and then be able to bring up another table depending on the row selected...basically so that the user can draw deeper into the information that they require.
I have an example excel sheet where I have 2 sheets. One sheet is the user entry sheet called User Entry Screen. the next sheet is the tables sheet where my tables are held. Once the user selects the cell shown in the example sheet, it should then bring up the user form. the user then, depending on which item clicked, then gets shown the next window with a table and info on it. then user should then be able to select an item and the cells on the user entry screen would then get populated.
Personally I think this is a really tricky challenge and any help with doing this would be extremely appreciated.
I'll post up further comments as I am trying to work my way through it!
Thanks,
Jag
For example, suppose you have tables of data on 3 different tabs, all having the same headings. Suppose one of the headings is "gender". If you apply a filter to the table on Sheet 1, to only show the rows containing the word "female", is it possible to have the tables on Sheets 2 and 3 automatically update to only show the "female" rows? Or would you have to manually update the filter criteria in Sheets 2 and 3?
I hope this makes sense. Thank you in advance for any help.
I have set up a workbook that is sent out to lots of different users. They each keep and use their own copy.
I have set it up so that everything looks OK and is visible on MY screen, but I'm conscious that some users may have different screen sizes, different toolbars set up, and so on, which might make some parts not immediately visible to them.
I have set up an auto-execute macro which automatically sets the zoom factor to best fit, for several of the worksheets, and this works fine.
Here's the code that does it.
Code:
Sheets("WELCOME").Select Range("A1:N18").Select ActiveWindow.Zoom = True
By repeating this code for each worksheet, I can make each one be zoomed just right.
However, the file contains 8 sheets that are all identically laid out, except the number of rows is different.
What I want to do is go to the worksheet that has the largest number of rows (it's always the same worksheet, so I know which one it is), set the zoom factor for THAT worksheet (which I can do, and it always has the same number of rows), and then take THAT zoom factor, whatever it is - and it will vary depending on the user - and apply that to the other worksheets that have a similar layout.
I could just go through each worksheet and zoom it automatically, but that would mean that some of the sheets looked very large, others very small, and I'd like them to have a consistent appearance.
I could also specify a range on each worksheet that was similar to the appropriate range on the longest worksheet, and zoom that automatically, but that's not ideal either, because some of the row heights vary from sheet to sheet, and again I'll end up with different font sizes.
Anyone know how to do this ?
I have 6 sheets to count and all the names are in column A (from A1:A100) on each sheet. The names are not in a particular order.
On sheet 7 I want to have a cell beside each persons name that counts the number of times their name appeared on the other 6 sheets.
For example Sheet 7 (called total) would have
Joe 5 (where 5 is the outcome of the formula I'm looking for to count all the times "Joe" appears on sheets 1-6).
I have it counting per sheet with =COUNTIF(A1:A130,"name") but this is not quite what I am looking for.
Thanks in advance for any advice.
Edit: I am using Excel 2007 w/ windows XP
How can I get Excel to sort these into alphabetical order ?
(From kyeoward@hotmail.com)
I'm quite experienced Excel user. I've never come across this problem but tinkering in every conceivable way within Excel settings and the solution has eluded me.
I have added a worksheet created elsewhere (it is a form I need printing, with the data coming from 2 sheets I have created from scratch) which has pre formatted cells for Date and Client Name etc.
When I try to reference the cell in this added sheet from my 2 sheets, instead of the result, it always displays the formula, not the result.
I have tried doing it from one of my sheets to reference to this new, and that displays the result and not formula. I can't imagine why it's doing this and I've never seen it happen before.
Formatting cells, giving cells names rather than the usually adequate of reference to the Cell Number doesn't change things. I wonder if I've picked up some legacy protection from the original form but can't see anywhere in the tools etc that's obvious.
There's about 50+ cells that need referencing and I got to get this done for work.
Please help me. This is my first need to post on a Excel Forum as I've always found help or answers from other peeps or internet but this one is making me scratch my head big time.
I hope you have an ansewer.
Cheers,
Doug
I have one staff member that does the data entry but I don't want them to see the 2nd sheet. I know I can hide the sheet then protect the entire workbook which does work, but is there an easier way so that the second person doesn't have to keep hiding/unhiding the 2nd sheet?
It would be perfect if when you tried to click on Sheet2, it asked for a password.
Cheers
Jase
I have a file that has 8 sheets. the first seven sheets are the days of the week and the 8th sheet is where I want to calculate the hours.
The days of the week consists of "Name" "Date" Hours"
The 8th sheet consists of "Name", "Days of the week in their own column (7 columns in total)", "Total Hours" and "Total Days Worked"
Now... each day is always a different group and what I'm hoping for is to create a formula that can grab each name with their hours and throw them into the 8th sheet. So when the end of the week is done I have all the Employees weekly hours and days worked all finished.
I hope this makes sense. This file is to track about 100 employees that are on a rotational work schedule.
I have attached a sample file.
Thanks in advance for your help.
Is there a way to create a second worksheet that is based on data from an original sheet that will automatically update when you ADD ROWS to the original sheet?
Linking values between sheets is easy... but I need to be able to set a designated area on my A sheet that I can add rows into which will automatically be added to my B sheet.
Does anyone know of a function that I can apply for this?
I'm trying to write a macro which prints to PDF and saves the file name as the contents of a cell. I've been looking through all the posts currently on this forum to get something working. I'm using the following code -
Sub PrintPDF()
Filename = "C:\Documents and Settings\samb\My Documents\" & ActiveSheet.Range("Z1").Value
SendKeys Filename & "{ENTER}", False
ActiveWindow.SelectedSheets.PrintOut Copies:=1, ActivePrinter:= _
"Adobe PDF:", Collate:=True
End Sub
The macro prints to PDF, but then it stops at the Save As stage, where I have to manually enter the name of the file and click Save. I want the macro to automatically name the file with the contents of cell Z1. I then want it to then automatically press enter. Any ideas where I'm going wrong? Any help would be much appreciated!
worsheets ..... this is for petty cash monthly sheets and I need a running
total over the 12 sheets.
At present I have to do this manually .... is there a formula that I can use
that will automatically carry the balances over
Thanks for your help
I have the below code which deletes all items from a listbox and my excel sheet which is the source for populating that listbox. I am using a option button style for my listbox and the selection style as single .i.e. you can select only one item at one go in the lisbox. I want my macro to delete the selected item from my worksheet .i.e. it's entire row so that it doesn't reflect in my lisbox any more. Below is my code :
Code:
Private Sub CommandButton2_Click() 'REMOVE SELECTION Dim I As Long With ListBox1 For I = .ListCount - 1 To 0 Step -1 If .Selected(I) Then .RemoveItem I Sheets("URL List").Rows(I + 2).EntireRow.Delete End If Next I End With End Sub
Thanks a lot for your help in advance.