Missing: Microsoft Windows Common Controls-2 6.0 |
Missing: Microsoft Windows Common Controls-2 6.0 - Excel |
|
I have windows XP and Excel 2003. In Visual Basic Editor, References, I have missing the Microsoft Windows Common Controls-2 6.0. How can I enable it?
When opening the file, excel prompts Error compiling some modules. Opening the file in another pc with this common controls enabled, it works fine.
Thanks a lot fot the help.
When opening the file, excel prompts Error compiling some modules. Opening the file in another pc with this common controls enabled, it works fine.
Thanks a lot fot the help.
Excel VBA Course - From Beginner to Expert
200+ Video Lessons 50+ Hours of Instruction 200+ Excel Guides
Become a master of VBA and Macros in Excel and learn how to automate all of your tasks in Excel with this online course. (No VBA experience required.)
(80% Discount Ends Soon!)
Similar Topics
Hi all,
I've been getting this error on occasion recently.
- It's a shared document
- There is usually 10-12 people using the file at the same time
I've read on the Microsoft Help site that the issue is that somebody is accessing the file while another is trying to open it.
Is there a way, perhaps through VBA, that I can not allow a user to save while somebody else is opening the document? Other suggestions on how to avoid this error?
Thanks!
I've been getting this error on occasion recently.
- It's a shared document
- There is usually 10-12 people using the file at the same time
I've read on the Microsoft Help site that the issue is that somebody is accessing the file while another is trying to open it.
Is there a way, perhaps through VBA, that I can not allow a user to save while somebody else is opening the document? Other suggestions on how to avoid this error?
Thanks!
Thought I'd append my experience of the above problem - you can find all sorts of references to it everywhere.
My problem was that a userform defined with Excel at work (containing DT pickers) gave the message in the title when opening it at home. I had a light-bulb moment and wondered whether there was a difference in the version numbers for MSCOMCT2.OCX at work and at home. Turned out the work version was newer. I then copied the MSCOMCT2.* files from work, made a backup of them at home and copied those from work to my C-drive (Windows XP - c:\windows\system32\ ).
No luck. I then rebooted the machine - still no luck.
Then, finally I unregistered the old DLL via
Code:
(not sure if this was necessary, but I didn't think it could hurt). Reregistered the DLL via
Code:
and what do you know - it worked.
Summa summarum - it could be an idea to check whether the two machines have different version numbers for the MSCOMCT2.OCX files.
My problem was that a userform defined with Excel at work (containing DT pickers) gave the message in the title when opening it at home. I had a light-bulb moment and wondered whether there was a difference in the version numbers for MSCOMCT2.OCX at work and at home. Turned out the work version was newer. I then copied the MSCOMCT2.* files from work, made a backup of them at home and copied those from work to my C-drive (Windows XP - c:\windows\system32\ ).
No luck. I then rebooted the machine - still no luck.
Then, finally I unregistered the old DLL via
Code:
regsvr32 /u c:\windows\system32\MSCOMCT2.OCX
(not sure if this was necessary, but I didn't think it could hurt). Reregistered the DLL via
Code:
regsvr32 c:\windows\system32\MSCOMCT2.OCX
and what do you know - it worked.
Summa summarum - it could be an idea to check whether the two machines have different version numbers for the MSCOMCT2.OCX files.
Hi all,
I've had a long search through your pages to see if this question has been answered before but having browsed through about 50 pages worth of threads I couldn't see anything, but if I am repeating prior information I do apologise.
I've written a macro that is relatively simple. It just takes some information in one format, rearranges it, adds some formatting and performs some calculations. Nothing incredibly fancy but it works fine on my computer.
Now, I need to share this macro with some other people, so basically I've just sent that excel file on to the people that need to use it. Should be fine and in most cases it is, however there is one user who although they can open the file, can't seem to get the macro to run properly.
It seems to get a small way through the macro but then stop with no error messages or any sign that it hasn't completed properly.
I have checked Macro Security level and that is the same as mine, Tools - Add-Ins is the same, In Visual Basic, Tools - References is the same as mine. It is the same Operating system and the same version of Excel.
I have even signed into this person's computer as myself (it's a big company network thing) and tried to run the macro and it works fine, so there is nothing wrong with the hardware.
I've googled and searched and tried everything I can think of but I'm no closer to solving this problem, so if anyone has read through this wall of text and can come up with a possible solution, that would be greatly appreciated to save me from tearing ALL my hair out!
Thanks very much for your time.
I've had a long search through your pages to see if this question has been answered before but having browsed through about 50 pages worth of threads I couldn't see anything, but if I am repeating prior information I do apologise.
I've written a macro that is relatively simple. It just takes some information in one format, rearranges it, adds some formatting and performs some calculations. Nothing incredibly fancy but it works fine on my computer.
Now, I need to share this macro with some other people, so basically I've just sent that excel file on to the people that need to use it. Should be fine and in most cases it is, however there is one user who although they can open the file, can't seem to get the macro to run properly.
It seems to get a small way through the macro but then stop with no error messages or any sign that it hasn't completed properly.
I have checked Macro Security level and that is the same as mine, Tools - Add-Ins is the same, In Visual Basic, Tools - References is the same as mine. It is the same Operating system and the same version of Excel.
I have even signed into this person's computer as myself (it's a big company network thing) and tried to run the macro and it works fine, so there is nothing wrong with the hardware.
I've googled and searched and tried everything I can think of but I'm no closer to solving this problem, so if anyone has read through this wall of text and can come up with a possible solution, that would be greatly appreciated to save me from tearing ALL my hair out!
Thanks very much for your time.
Hello,
I have a number of different files that I often need to run a macro on. In order for me to do it on the 75-100 files I have at any given time, I need to open one, run the macro, close and save, then open the next one.
Is it possible to write a macro that will start with the first file in a folder, open it and update links, run a macro, save and close, and open the next file in the folder until it has open all the files in the folder.
I have experience with creating macros that reference different workbooks, but not sure how to go about opening files with different filenames (without referencing the exact filename).
I'd like to be able to have basic code for opening, saving and closing, opening next file, saving and closing, etc. and input the macro I'd need to run in each file in the appropriate location. Is this possible? Any help is greatly appreciated!!
Thanks,
Jason
I have a number of different files that I often need to run a macro on. In order for me to do it on the 75-100 files I have at any given time, I need to open one, run the macro, close and save, then open the next one.
Is it possible to write a macro that will start with the first file in a folder, open it and update links, run a macro, save and close, and open the next file in the folder until it has open all the files in the folder.
I have experience with creating macros that reference different workbooks, but not sure how to go about opening files with different filenames (without referencing the exact filename).
I'd like to be able to have basic code for opening, saving and closing, opening next file, saving and closing, etc. and input the macro I'd need to run in each file in the appropriate location. Is this possible? Any help is greatly appreciated!!
Thanks,
Jason
If I want to activate a workbook, I would do this:
Code:
But what if the File.xls was a variable named File?
I have tried this:
Code:
Without success. Please advise.
Code:
Windows("File.xls").Activate
But what if the File.xls was a variable named File?
I have tried this:
Code:
Windows(File).Activate
Without success. Please advise.
I have excel sheets that cross link with each other. I've just migrated to Office 2007. When I open my excel sheet I always get the question at the bottom of the tool bar Security Warning Data connections have been disabled. And then I have to click on option and enable content.
My question is, how do I always enable the content?
Thanx
My question is, how do I always enable the content?
Thanx
I have a file that became too big due to phantom bloat, unused range saved by Excel and all that kind of reasons. Thank to previous posts on that board tackling that issue, I was able to find how to proceed to reduce the file back to its normal size.
But I did so in a beta file (test file). The real file has become so big (103MB!) that Excel cannot even open it anymore! The file contains archive info that we do not have anywhere else.
Is there anyway then to open the file or to reduce its size without opening it (through magics...)? I just honestly don't know how to retrieve that info before deleting that file.
Thank you very much for your help.
But I did so in a beta file (test file). The real file has become so big (103MB!) that Excel cannot even open it anymore! The file contains archive info that we do not have anywhere else.
Is there anyway then to open the file or to reduce its size without opening it (through magics...)? I just honestly don't know how to retrieve that info before deleting that file.
Thank you very much for your help.
We have an Excel spreadsheet that sits on the network.
People need to open the file to be able to sign up for various duty rosters.
We would like for the file to open for the first person.
And then for any others after that, get a message that the file is in use
WITHOUT the option to open a read-only copy.
Our staff can't read and they keep opening additional copies of the file!
I have read about sharing the file and I don't think that would make things
any better.
Thanks,
Lynn
People need to open the file to be able to sign up for various duty rosters.
We would like for the file to open for the first person.
And then for any others after that, get a message that the file is in use
WITHOUT the option to open a read-only copy.
Our staff can't read and they keep opening additional copies of the file!
I have read about sharing the file and I don't think that would make things
any better.
Thanks,
Lynn
Imagine a whole box of lengths of aluminium sections for making windows.
To make those windows I need to cut these lengths into smaller sizes.
I need to do this economically.
How can I use Excel to help me make this a reality.
Firstly you would take a big size out of it and then another size out of the offcut piece.
And then another size out of the offcut left over.
I need to know how many full stock lengths (6500) long it will take to cut all the pieces listed above.
Is it possible?
You need to take into account the quantity of each size and fit it all in together for the most optimal outcome.
See attached example of possible layout.
To make those windows I need to cut these lengths into smaller sizes.
I need to do this economically.
How can I use Excel to help me make this a reality.
Firstly you would take a big size out of it and then another size out of the offcut piece.
And then another size out of the offcut left over.
I need to know how many full stock lengths (6500) long it will take to cut all the pieces listed above.
Is it possible?
You need to take into account the quantity of each size and fit it all in together for the most optimal outcome.
See attached example of possible layout.
Hi, I'm trying to get some macros to combine data from two open workbooks, and I can't figure out the commands to switch from the active workbook to the other open workbook and back. I'm new to VBA and just learning the ropes. All I can figure out is how to switch to another workbook with an exact name. If I record the macro to go to a recent file, for example Window > 1 (filename), the code that I get in VBA is Windows("filename").Activate. This doesn't translate to when I have two different workbooks with different filenames open.
Make sense? I'm a bit confused myself. Maybe just a list of basic workbook-switching techniques or commands would be useful.
- Michael
Make sense? I'm a bit confused myself. Maybe just a list of basic workbook-switching techniques or commands would be useful.
- Michael
I am a very advanced Excel user so this is a new one for me.
When I open any spreadsheet (new or already populated) the black box that normally frames the active cell is missing (showing which cell you have selected). Likewise when I 'select all' the sheet does not become shaded.
In addition:
Can not fill series
Can not change cell format (specifically to show Currency or Accounting w/$ symbol)
And I am sure there is much more that I have not found yet. I have not seen a single thread on this topic anywhere on the internet.
Help!
When I open any spreadsheet (new or already populated) the black box that normally frames the active cell is missing (showing which cell you have selected). Likewise when I 'select all' the sheet does not become shaded.
In addition:
Can not fill series
Can not change cell format (specifically to show Currency or Accounting w/$ symbol)
And I am sure there is much more that I have not found yet. I have not seen a single thread on this topic anywhere on the internet.
Help!
I have created a simple macro in this excel spreadsheet. Everything works fine until I sent the attachment to my boss. It does not work and keep showing s pop up error msg.
What could be wrong?
What could be wrong?
I have a VBMacro Excel file loaded on a Server that numerous people access. A Macro in this file creates a Copy of a specific Sheet within the Active Workbook and I want to Save it to the individual's Desktop.
How do I find out what the current User's desktop folder path is each time the Marco is run by a different User?
Example User's path: 'C:\Documents and Settings\jfarc\Desktop'
Where 'jfarc' is the name of the current User which, will of course change with every different User that runs the Macro.
Also, is there a way to pull out of Excel what is the current User's 'Options | General | Default File Location' entry? Which may differ from the above directory.
I am familiar with and use the following coding for Opening/Saving files to the current directory of the opened workbook, but it only gives the path of the existing Excel workbook and not the current User's Directory Path:
Dim wbThis As Workbook
Set wbThis = ThisWorkbook
ChDir wbThis.Path
How do I find out what the current User's desktop folder path is each time the Marco is run by a different User?
Example User's path: 'C:\Documents and Settings\jfarc\Desktop'
Where 'jfarc' is the name of the current User which, will of course change with every different User that runs the Macro.
Also, is there a way to pull out of Excel what is the current User's 'Options | General | Default File Location' entry? Which may differ from the above directory.
I am familiar with and use the following coding for Opening/Saving files to the current directory of the opened workbook, but it only gives the path of the existing Excel workbook and not the current User's Directory Path:
Dim wbThis As Workbook
Set wbThis = ThisWorkbook
ChDir wbThis.Path
I have imported a DBF file into Excel and have a column of dates that are missing the leading zero on single didgit months. When I try to us the custom format of mm/dd/yyyy it doesn't work (interestingly, after I select that format if I click on an individual cell it changes to the right format).
Does anyone know a better way to do this?
Thanks in advance!
Does anyone know a better way to do this?
Thanks in advance!
Good afternoon!
I'm working with Excel 2003 sp 3 on Windows xp.
I have been banging my head trying to jar loose the formula to calculate man days where 1 equals 8 hours. I have one that was given to me by a coworker:
=INT(Q3/8)+(((Q3/8)-(INT(Q3/8)))*0.8)
That calculates man days from total hours. I need a formula that will total man days and return the man day answer. Example:
weekending 12/25 = 16.2 which is 16 man days and 2 hours
weekending 1/1 = 24.7 which is 24 man days and 7 hours
Total = 41 man days and 1 hour
I have also been asked if there was a way for a number to be entered into a spreadsheet and automatically put in order without a macro or "pushing a button".
Any advice is greatly appreciated!
Happy New Year!
~ Brenda ~
I'm working with Excel 2003 sp 3 on Windows xp.
I have been banging my head trying to jar loose the formula to calculate man days where 1 equals 8 hours. I have one that was given to me by a coworker:
=INT(Q3/8)+(((Q3/8)-(INT(Q3/8)))*0.8)
That calculates man days from total hours. I need a formula that will total man days and return the man day answer. Example:
weekending 12/25 = 16.2 which is 16 man days and 2 hours
weekending 1/1 = 24.7 which is 24 man days and 7 hours
Total = 41 man days and 1 hour
I have also been asked if there was a way for a number to be entered into a spreadsheet and automatically put in order without a macro or "pushing a button".
Any advice is greatly appreciated!
Happy New Year!
~ Brenda ~
I did a bit of browsing on this problem. Found others suffering the same but haven't found any conclusive answer yet.
Every so often when I attempt to save a file, (including save as), Excel won'r let me. By won't let me I mean:
using Save doesn't appear to do anything using Save As doesn't either do anything, the dialog is not displayed and if I am doing via the File menu then the File menu is exited and the previous ribbon tab is displayed (i.ethe one I was on before clicking 'File') if I close the workbook I am prompted to save, close without saving or cancel. Clicking save just invokes the same msgbox again. I can't work out when it goes into this mode. Some days I can work without this problem, other days I encounter this 2 or 3 times.
The only thing I could suspect was I think this started around about the time I installed xlDennis' code library. I have uninstalled the addin and so far so good, but I cannot categorically say that this was the cause.
Anyone have any idea?
Cheers
Jon
Edit: I have read this: http://support.microsoft.com/kb/271513
Doesn't seem to cover the issue I describe
Every so often when I attempt to save a file, (including save as), Excel won'r let me. By won't let me I mean:
using Save doesn't appear to do anything using Save As doesn't either do anything, the dialog is not displayed and if I am doing via the File menu then the File menu is exited and the previous ribbon tab is displayed (i.ethe one I was on before clicking 'File') if I close the workbook I am prompted to save, close without saving or cancel. Clicking save just invokes the same msgbox again. I can't work out when it goes into this mode. Some days I can work without this problem, other days I encounter this 2 or 3 times.
The only thing I could suspect was I think this started around about the time I installed xlDennis' code library. I have uninstalled the addin and so far so good, but I cannot categorically say that this was the cause.
Anyone have any idea?
Cheers
Jon
Edit: I have read this: http://support.microsoft.com/kb/271513
Doesn't seem to cover the issue I describe
I have workbook in which I want to save a specific worksheet to a new file with only the values saved - all data in this worksheet are references to cells on another worksheet, which is using VLOOKUP to pull data from a database.
Found the following code and it gets me close, but it copies the cell references, not the values. It also allows me to specify the file name from a cell reference.
I want the new workbook file to simply be saved, not opened, and a message box to display stating where the file was saved (will always be in the same location on the LAN).
What modifications do I make to this to get this to work per above requirements?
Sub CopyMe()
Dim SaveMeAs As String
SaveMeAs = Sheets("Sheet1").Range("B2").Text
Sheets("Sheet3").Copy
ActiveWorkbook.SaveAs Filename:="C:\My Documents\" & SaveMeAs
End Sub
Found the following code and it gets me close, but it copies the cell references, not the values. It also allows me to specify the file name from a cell reference.
I want the new workbook file to simply be saved, not opened, and a message box to display stating where the file was saved (will always be in the same location on the LAN).
What modifications do I make to this to get this to work per above requirements?
Sub CopyMe()
Dim SaveMeAs As String
SaveMeAs = Sheets("Sheet1").Range("B2").Text
Sheets("Sheet3").Copy
ActiveWorkbook.SaveAs Filename:="C:\My Documents\" & SaveMeAs
End Sub
I'm using some basic code below in an on Workbook Open event to format cells with a value less then 2 and less than 1 with a particular color.
The code works, but it really slows my worksheet down when opening. Is there better way to write this? Thanks!
Code:
The code works, but it really slows my worksheet down when opening. Is there better way to write this? Thanks!
Code:
Dim myRange As Range
Dim cell As Range
Set myRange = Range("V6:V50000")
For Each cell In myRange
If cell.Value < 2 Then cell.Font.ColorIndex = 5
If cell.Value < 1 Then cell.Font.ColorIndex = 3
Next
I'm having a problem in a workbook with several ActiveX command buttons. I had been using the form control buttons to run macros, but the boss wanted each button to have it's own, different color. So I removed the form control buttons and created new ActiveX command buttons. I got into the button properties and set the background colors. I added the _Click code to run the macros when the user clicked the buttons.
All of the buttons were working fine. Then I saved and closed the workbook and went to lunch. Now when I open the workbook, the buttons don't work! When I click them nothing happens. They appear frozen. They don't even seem to click. No error message. Nothing.
If I right-click the button in Design Mode and select Properties, I get sheet properties not the button properties. I can't seem to locate the command button properties any longer. I still see the button name "cmdButtonGetInfo" and "=EMBED("Forms.CommandButton.1","") in the name box and formula bar. The odd thing is if I create a new button it works fine until I save and close the file. When I reopen the file none of the buttons work.
It's like the buttons are being disabled when I close or open the file. Any suggestions?
All of the buttons were working fine. Then I saved and closed the workbook and went to lunch. Now when I open the workbook, the buttons don't work! When I click them nothing happens. They appear frozen. They don't even seem to click. No error message. Nothing.
If I right-click the button in Design Mode and select Properties, I get sheet properties not the button properties. I can't seem to locate the command button properties any longer. I still see the button name "cmdButtonGetInfo" and "=EMBED("Forms.CommandButton.1","") in the name box and formula bar. The odd thing is if I create a new button it works fine until I save and close the file. When I reopen the file none of the buttons work.
It's like the buttons are being disabled when I close or open the file. Any suggestions?