Duplicated A Column Cells- Concatenate B Column?

Hello

I am trying to understand why I can not use Ctrl+F to find data in Column B, yet I can find the data in Column A.

I have a worksheet that in column A has numbers, in column B, the following formula "IF(ISNUMBER($A1),$A1,"").

Ctrl+F will find numbers in Column A, yet not in Column B. Why is this so? What can be done to ensure Ctrl+F works in Column B?

is it possible to put two formulasinto one cell?

On the attached timesheet there are columns IN, OUT, IN,OUT
The lunch time is worked out by deducting 'C8 from C9' and this works fine when all 'IN, OUT' cells are filled in but for some reason when just the first two cells are filled in it gives a -12 hour answer.

looking at cell 'C11 ' in the attached worksheet, I currently have the formula
=IF(C13=0,","SUM(C9-C8)) The reason for this is to make it look tidy by having blank cells until a calculation is needed,, My problem is, If someone just comes in for the morning one day for instance 8am to 12 noon then they won't have lunch, but C11 will show -12:00
Can I put another formula into C11 to tell it not to deduct C8 from C9 until a time is put into C9.
The following is the sort of thing (many variations) I have been trying but because I'm hopeless at formulas I'm not having any success
Thanks

=IF(C13=0,","SUM(C9-C8))OR,IF(C9,ISBLANK,"",SUM(C9-C8)

Hi,

I am entering lots of family history data into a spreadsheet. At the simplest I have columns (in cells A1 B1 C1) the headings, Surname, Forename, Year. Right now, I enter in cells A2 B2 and C2 say: Smith <Tab> John <Tab> 1555 <Enter, move mouse to the A column in the next row down). What I want to happen is when I have entered the last data in a row and pressed <Enter> I move automatically to the A-column in the next row down.

Is this possible?

Regards and a Merry Christmas to all

Wibs

Hi,

I'd like help in creating a macro that deletes an entire row that has emtpy cells in col B, C & D in the same row.
So for example if I have empty cells in b3,c3 & d3 I'd like the row deleted.

I've used the code below for just column B but I need to include column C & D as well. I tried putting Columns("B:D") but it deletes everything.

Code:

Sub Step4()
   On Error Resume Next
   Columns("B:B").SpecialCells(xlCellTypeBlanks).EntireRow.Delete
End Sub

I'm sure it's something simple... like me !

Any help much appreciated

Wrightie

Hi,

How would I concatenate a large range of cells, most of which are blank, and add a comma between each cell's value?
My range is E2:Y2 (I will be filling down), but most of the cells are blank. For example, if I F2=9, I2=11 and X=25, I would like to display them as: 9,11,25.
If in the next row, G=10, K=15 and Y=27, they should look like this: 10,15,27.

Thanks in advance!

Jenny

Hi there,

I'm very new to Excel, and I'm having trouble figuring a few things out. Hopefully this will be very easy for you guys!

In Sheet 1, I have a column of cells that I would like to also appear in Sheet 2. If I add a new row to the column in Sheet 1, I would also like it to be updated automatically in Sheet 2. Currently, I can get it to show the contents of individual cells from Sheet 1 in Sheet 2 by using this formula in the formula bar for each cell in Sheet 2:

=Sheet1!A3 (or whichever cell it is)

That's fine, but I'd like to just have a formula that will reproduce the entire column (ie. without a fixed range, as new rows are going to be added to the column).

If anyone could point me in the right direction, I'd be very very grateful. Thanks.

Hello,

I need to know how to auto-fill text based on text in another cell. For
example:

Every time I enter "CHS" in Column B, I want Charleston to auto-fill in
Column C.
And when I enter "SAN", in Column B, I want San Diego to auto-fill in Column
C.

How can I set up a list like this? Any ideas?

Thanks!

Jason

Afternoon all,

I'm hoping someone can help me.

I need to be able to clear the contents of cells in column C, D, E, H if the value of column Q equals HELLO for arguments sake.

Clearing the contents of an entire row is not a problem, however when it comes to resizing rows I seem to come unstuck.

Related thread: http://www.mrexcel.com/forum/showthread.php?t=476993

Any help would be appreciated.

I have looked over the forums for information on how to do this, and can not find anything. I have used conditional formatting to identify duplicates in my spreadsheet. I have a unique user ID, which combines the first and last name fields into one. However, in 10,000 there are a number of John Smiths, Joe Adams, etc. With smaller lists, we search manually, and then add a 1, 2, 3, etc to each duplicate to create a unique value for the User ID.

My question is:

Is there a way to check for duplicates, and then automatically add numbers to the duplicate values to make them unique? If so, how can this be done?

So that you will have this:

JohnSmith
JohnSmith2
JohnSmith3
JaneDoe
JaneDoe2
JohnAdams
JohnAdams2
JohnAdams3
JohnAdams4

I think I have done a good job in illustrating what I would like to be able to do, but if there is still something that is unclear, I will post whatever clarification is needed.

Thank you in advance for your help!!

I have a problem: I can't show some rows after they've been hidden with a macro. I tryed the "select all / unhide", but it doesn't work.

I noticed the row numbers are all blue now. What does it mean? (This could be the answer..:P)

Hi,

Im working with a large data spreadsheet that has Yes and No answers in different columns. There are blanks within the selection too.
I need to calculate only the Yes.
I have tried using the filters in the Pivot Table field list and they are not working.
So now i'm trying to add a COUNTIF formula in the Calculated Fields section.
The formula I'm using is =Countif('Time limit extension'="yes") and i get the answer "too few."
What should I be using in the formula to get the calculated field to work? I have search the whole forum and I haven't found an answer that can help me.

Please HELP!!!

Hi

I'm not sure how to do this, but I want the Total (column D) to be the sum of the Unit Price (column C) times the Quantity (column A). Is there a formula you can apply to a column or do I have to do it in individaul cells?

Hello, I'm trying to count the number of times a name appears across multiple worksheets but I can't seem to figure it out.


I have 6 sheets to count and all the names are in column A (from A1:A100) on each sheet. The names are not in a particular order.

On sheet 7 I want to have a cell beside each persons name that counts the number of times their name appeared on the other 6 sheets.

For example Sheet 7 (called total) would have

Joe 5 (where 5 is the outcome of the formula I'm looking for to count all the times "Joe" appears on sheets 1-6).

I have it counting per sheet with =COUNTIF(A1:A130,"name") but this is not quite what I am looking for.

Thanks in advance for any advice.


Edit: I am using Excel 2007 w/ windows XP

I saw two threads in this forum that asked this question, with no good answer. I am posting this solution for anybody still struggling with this.

The question:
How can you prevent a cell's contents from overflowing into the next cell?

Of course, you can make the column wider or turn on text wrapping, but you might not want to. Each of those solutions can mess up the layout of your sheet. You may just want to truncate the value.

Some people have suggested putting a space in the next cell. This is unnecessary, a pain in the but, and will mess up any ISBLANK type formulas, among other things.

The solution:
Select the cells in question and turn on text wrapping (Format>Cells>Alignment>Wrap Text).
Now select the row(s) in question and manually set the row height, by right clicking the row number and selecting "Row Height". Check the height of an adjacent row for a good value.

Your cells will now not spill over either horizontally or vertically. They will simply truncate anything that doesn't fit.

Be careful now, because parts of your data may be hidden. This can cause its own set of problems if one or two digits are neatly hidden away. Think ahead if other people might be using this sheet, and not be expecting to have some data hidden.

Tested in Excel 2002

Dear Sirs,

Am in need for this solution very badly and what could be a better place than excelforum !

I have an MS Excel File (2007 version) sample file attached, which has name, designation, blood group and so on. The last column is for hyperlinking photographs of individuals.

In the same folder where I have saved this excel file, are lying photographs of individuals. While scanning the photographs, I have saved them serially i.e. 1,2,3 and so on.

In the Excel file, in last column, I have given the respective serial numbers. In order to hyperlink one has to select that particular Cell, press Ctrl K and you automatically go to the folder containing individual photographs, you select that photo and OK.

Problem :

I have to do this hyperlinking one by one and if there 1000 photos, lot of time is wasted.

Solution Needed :

Just in case of excel formula, which we copy and paste, Can I get a command by virtue of which the column titled Photo or column next to it gets automatically Hyperlinked to respective photo WHEN I copy and paste such command to all cells in that column.

Thanks a million and warm regards ::: Jack