Protected Sheet & Allow Use Of Autofilter |
Protected Sheet & Allow Use Of Autofilter - Excel |
|
I've locked certain columns on my worksheet so that users cannot overtype target dates etc. I've password protected the worksheet.
The password protection means that for some reason the users can't use the autofilters that are on the header row.
Can someone help me solve this problem; I still need the locked cells and password protection on the sheet but the success of the sheet depends on users being able to filter for specific rows using the autofilter....
Awaiting any responses.....
Similar Topics
would like to be able to use, but it is password protected and no one has the
password. Is there a way to copy or save it as a different file that will
not copy the password protection? It would save me a couple days of work if
it is possible.
Thanks
I have a worksheet that is locked and protected now, except for cells in a certain collumn. I have named the cells in that column "MS96A".
If a user enters a date in a cell or range of cells anywhere in the column, the changed cells also need to be locked and protected (Once they enter a date, it is not allowed EVER to be changed again. Corporate requirement! *Shrug*).
What I am looking for is this. If the user selects that cell again, they will get the usual pop-up message, "The cell or chart that you are trying to change is protected..."
I think I am close, but I am getting an "End If without block If" error on the If Clause.
Sub Worksheet_Change(ByVal Target As Excel.Range)
Dim MRange As Range
Set MRange = Range("MS96A")
' If Not Intersect(Target, MRange) Is Nothing Then For Each cell In MRange Sheets("Sheet1").Unprotect Password:="temp"
cell.Interior.ColorIndex = 3
cell.Font.Color = vbBlack
Selection.Locked = True
Selection.FormulaHidden = False
Next cell
ActiveSheet.Protect Password:="temp", _
DrawingObjects:=False, _
Contents:=True, _
Scenarios:=False
ActiveSheet.EnableSelection = xlUnlockedCells
End Sub
I need to open a password protected workbook using VBA.
I've tried the code below but I still get prompted for a password.
Code:
Workbooks.Open Filename:="\\HOME\Working\Report.xls" _ , Password:="xxxx"
How do I get it to open automatically???
i've got the following problem:
I want users to double-click on a row on a protected sheet and then do some code based on the row-number of the clicked cell. I've protected the sheet because it contains a lot of formula's.
When a user double-clicks a row it triggers the code through the Workbook_SheetBeforeDoubleClick event.
After the code is executed Excel shows a message that the cell that was clicked was protected etc etc.
How can I prevent this message from popping up?
I've already tried
Code:
application.displaywarnings = false
but that didn't work
Thanks
I have an excel file that is password protected. I have opened it as read-only.. Is there any way to unlock it & do it modifiable when I already opened it as read only (of course without having to close it & re-open it and enter password lol)
Thanks,
Any ideas?
So far I can get everything to work besides the Submit part. The code runs without errors, but doesn't actually "hit" the submit button on the webpage.
For posting, I removed my actual user name and password and and used the generic " User Name " and " Password " highlighted in blue.
I highlighted another section in green that I took from a previous post hoping it would solve my problem. The link is: http://www.mrexcel.com/forum/showthr...xplorer+submit
Here is the code I am using:
Sub GoToWebSiteAndPlayAroundNew()
Dim appIE As Object ' InternetExplorer.Application
Dim URL As String
Set appIE = CreateObject("InternetExplorer.Application")
URL = " https://efolio.morgankeegan.com/escripts/defaultLogon.asp?errCode=2 "
With appIE
.navigate URL
.Visible = True
Do While .busy: DoEvents: Loop
Do While .ReadyState 4: DoEvents: Loop
.document.getelementbyid("fUserName").Value = " UserName "
.document.getelementbyid("fPassword").Value = " Password "
End With
On Error Resume Next
x = 0
For Each mitem In IE.document.all
mitem.Value = "x"
x = x + 1
Next
x = 0
For Each mitem In IE.document.all
If x = "Submit" Then
mitem.Click
Exit For
End If
Next
End Sub
I'm pretty new at VBA and was wondering if you could help me out on this:
I have created a VBA userform but will need to have it used by at least 5 users. My question is, can it be done with all users working at the same time and when saving their work all data entered will go to one master excel sheet? if yes, would you be kind enough to share the code?
MS Access is not an option for me so I was wondering if you could help me do this in excel.
thank you so much and would really appreciate to hear from anyone soon.
I have set up a workbook that is sent out to lots of different users. They each keep and use their own copy.
I have set it up so that everything looks OK and is visible on MY screen, but I'm conscious that some users may have different screen sizes, different toolbars set up, and so on, which might make some parts not immediately visible to them.
I have set up an auto-execute macro which automatically sets the zoom factor to best fit, for several of the worksheets, and this works fine.
Here's the code that does it.
Code:
Sheets("WELCOME").Select Range("A1:N18").Select ActiveWindow.Zoom = True
By repeating this code for each worksheet, I can make each one be zoomed just right.
However, the file contains 8 sheets that are all identically laid out, except the number of rows is different.
What I want to do is go to the worksheet that has the largest number of rows (it's always the same worksheet, so I know which one it is), set the zoom factor for THAT worksheet (which I can do, and it always has the same number of rows), and then take THAT zoom factor, whatever it is - and it will vary depending on the user - and apply that to the other worksheets that have a similar layout.
I could just go through each worksheet and zoom it automatically, but that would mean that some of the sheets looked very large, others very small, and I'd like them to have a consistent appearance.
I could also specify a range on each worksheet that was similar to the appropriate range on the longest worksheet, and zoom that automatically, but that's not ideal either, because some of the row heights vary from sheet to sheet, and again I'll end up with different font sizes.
Anyone know how to do this ?
I have the following code:
Code:
Sub Development() Pass = InputBox("Please enter development password", "Password") If Pass = "XYZ" Then UnhideAll Else: MsgBox ("Password incorrect, please try again") End If End Sub
This works, but I want to hide the text as it is entered.
Is there a way I can enter this as a property? i.e. inputbox.text.property = ... or something?? I've tried what seems intuitive, but nothing works.
Help!
I have the following:
1. Login form containing username and password fields.
2. Data entry form
I want to do the following:
1. Coding for username and password fields, which, If the login is successful, takes me to DATA Entry Form, Otherwise shows message "Invalid Login".
Thanks in anticipation.
worksheet are using it, they can't change the width. It's for editors who
write headlines for specific areas that can only be as long as the column is
wide or the text won't fit.
I need vba code to Select first visible cell below the header row after applying autofilter on column Q of the data. Can somebody help me on this?
I tried
http://www.mrexcel.com/forum/showthread.php?t=403989
but it does not work. Probably because column Q is filtered to show only blank cells,
Can somebody help me on this?
Thanks,
awagdarikar
I am brand new to Mr. Excel and would love some advice.
I searched the boards pretty extensively but could not find what I am looking for...I apologize if this is a duplicate.
I am using Excel 2007
How do you automatically add rows and update values for cells to a linked worksheet in which rows have been added? For example: Sheet 1, columns A & B are linked to Sheet 2, columns A & B. Sheet 2 has values in A1:A5 & B1:B5 and Sheet 1, since it is linked, has the same info. I want to add a row in between 3 & 4 on Sheet 2 and want Sheet 1 to automatically add the same row and update the value of the cell in column A & B.
Any help is greatly appreciated!
John
I have one staff member that does the data entry but I don't want them to see the 2nd sheet. I know I can hide the sheet then protect the entire workbook which does work, but is there an easier way so that the second person doesn't have to keep hiding/unhiding the 2nd sheet?
It would be perfect if when you tried to click on Sheet2, it asked for a password.
Cheers
Jase
Random question i have a large Excel Workbook (which is protected) and has over five sheets on it - however one sheet has randomly decided not to scroll... yes i know sounds random! If i use the cursor and down arrows the selection just disappears off the screen.
The page will scroll if i filter by one field, but not if i select (All) for all filters.
All other worksheets scroll fine.
Any suggestions?
Thanks in advance.
Cheers Kaite
This is what I want to happen but I have no idea how to do it.
If C14 = "IV" THEN E14 = Locked AND F14 = Unlocked
If C14 = "RV" THEN E14 = Unlocked AND F14 = Locked
If C14 = "AJ" THEN E14 AND F14 = Unlocked
Another thing I would like to make possible is for this to work throughout cells C14:C450, E14:E450 and F14:F450
Can anyone help me out on this?