Corrupt Spreadsheet And Temporary Files |
Corrupt Spreadsheet And Temporary Files - Excel |
|
Morning all,
I have searched for an answer before posting this thread, so apologies if this has already been covered.
I am an average user of Excel 2003 to manage a 1.7mb shared workbook, from which 40+ users input data. I have 3 main serious problems:
1) Although shared, occaisionally I get the message " the file is locked by USER, please save with different file name
2) At least twice a week, my workbook becomes corrupt and a series of weird files appear next to the Original file. These files have no extension, no description, they look like temporary files, but do not delete themselves, always 8 characters in length, a mix of numbers and letters.
I delete these files when they appear, remove the sharing, save the file, then share it again to prevent corruption, but 2 days later, same happens again. I am unable to open the original spreadsheet, but if I click on one of these weird files, it opens up to my workbook????
3)when I remove sharing, a number of users appear in the list, but are not actually in the file. Or the same name will appear twice with different dates.
I appreciate any thoughts you may have with these issues.
Many Thanks
Jet-Leon
I have searched for an answer before posting this thread, so apologies if this has already been covered.
I am an average user of Excel 2003 to manage a 1.7mb shared workbook, from which 40+ users input data. I have 3 main serious problems:
1) Although shared, occaisionally I get the message " the file is locked by USER, please save with different file name
2) At least twice a week, my workbook becomes corrupt and a series of weird files appear next to the Original file. These files have no extension, no description, they look like temporary files, but do not delete themselves, always 8 characters in length, a mix of numbers and letters.
I delete these files when they appear, remove the sharing, save the file, then share it again to prevent corruption, but 2 days later, same happens again. I am unable to open the original spreadsheet, but if I click on one of these weird files, it opens up to my workbook????
3)when I remove sharing, a number of users appear in the list, but are not actually in the file. Or the same name will appear twice with different dates.
I appreciate any thoughts you may have with these issues.
Many Thanks
Jet-Leon
Excel VBA Course - From Beginner to Expert
200+ Video Lessons 50+ Hours of Instruction 200+ Excel Guides
Become a master of VBA and Macros in Excel and learn how to automate all of your tasks in Excel with this online course. (No VBA experience required.)
(80% Discount Ends Soon!)
Similar Topics
Hello,
I have a number of different files that I often need to run a macro on. In order for me to do it on the 75-100 files I have at any given time, I need to open one, run the macro, close and save, then open the next one.
Is it possible to write a macro that will start with the first file in a folder, open it and update links, run a macro, save and close, and open the next file in the folder until it has open all the files in the folder.
I have experience with creating macros that reference different workbooks, but not sure how to go about opening files with different filenames (without referencing the exact filename).
I'd like to be able to have basic code for opening, saving and closing, opening next file, saving and closing, etc. and input the macro I'd need to run in each file in the appropriate location. Is this possible? Any help is greatly appreciated!!
Thanks,
Jason
I have a number of different files that I often need to run a macro on. In order for me to do it on the 75-100 files I have at any given time, I need to open one, run the macro, close and save, then open the next one.
Is it possible to write a macro that will start with the first file in a folder, open it and update links, run a macro, save and close, and open the next file in the folder until it has open all the files in the folder.
I have experience with creating macros that reference different workbooks, but not sure how to go about opening files with different filenames (without referencing the exact filename).
I'd like to be able to have basic code for opening, saving and closing, opening next file, saving and closing, etc. and input the macro I'd need to run in each file in the appropriate location. Is this possible? Any help is greatly appreciated!!
Thanks,
Jason
I know this question has been asked a bajillion times, so I apologize for the redundancy.
I am working with an Excel spreadsheet and saving it as a .csv file in order to upload to an application that parses out the .csv data as transactions. The system requires .csv files, so this is how I need to save my doc (with this extension). I have been successful at preventing Excel from coverting that long number into scientific format. I have saved as a TXT file, pasted the longer number and it displays correctly. That is all good. But I have to save as a .csv. So if I do that, close the Excel window, and then open again (as the .csv file), the numbers are back to being displayed in scientific format. I have tried creating an Excel doc from scratch and entering text in Text format, to see if this created a cleaner file. But again, the second I save as .csv, close the window and then open that file up again, that dang scientific format is back.
Does anyone have any idea of how to work around this? Once I have successfully gotten the numbers to display as the long-chain number, how can I get them to "stick" so that they don't revert back to scientific format when I reopen the file?
Thanks so much for your help!
I am working with an Excel spreadsheet and saving it as a .csv file in order to upload to an application that parses out the .csv data as transactions. The system requires .csv files, so this is how I need to save my doc (with this extension). I have been successful at preventing Excel from coverting that long number into scientific format. I have saved as a TXT file, pasted the longer number and it displays correctly. That is all good. But I have to save as a .csv. So if I do that, close the Excel window, and then open again (as the .csv file), the numbers are back to being displayed in scientific format. I have tried creating an Excel doc from scratch and entering text in Text format, to see if this created a cleaner file. But again, the second I save as .csv, close the window and then open that file up again, that dang scientific format is back.
Does anyone have any idea of how to work around this? Once I have successfully gotten the numbers to display as the long-chain number, how can I get them to "stick" so that they don't revert back to scientific format when I reopen the file?
Thanks so much for your help!
I have a VBMacro Excel file loaded on a Server that numerous people access. A Macro in this file creates a Copy of a specific Sheet within the Active Workbook and I want to Save it to the individual's Desktop.
How do I find out what the current User's desktop folder path is each time the Marco is run by a different User?
Example User's path: 'C:\Documents and Settings\jfarc\Desktop'
Where 'jfarc' is the name of the current User which, will of course change with every different User that runs the Macro.
Also, is there a way to pull out of Excel what is the current User's 'Options | General | Default File Location' entry? Which may differ from the above directory.
I am familiar with and use the following coding for Opening/Saving files to the current directory of the opened workbook, but it only gives the path of the existing Excel workbook and not the current User's Directory Path:
Dim wbThis As Workbook
Set wbThis = ThisWorkbook
ChDir wbThis.Path
How do I find out what the current User's desktop folder path is each time the Marco is run by a different User?
Example User's path: 'C:\Documents and Settings\jfarc\Desktop'
Where 'jfarc' is the name of the current User which, will of course change with every different User that runs the Macro.
Also, is there a way to pull out of Excel what is the current User's 'Options | General | Default File Location' entry? Which may differ from the above directory.
I am familiar with and use the following coding for Opening/Saving files to the current directory of the opened workbook, but it only gives the path of the existing Excel workbook and not the current User's Directory Path:
Dim wbThis As Workbook
Set wbThis = ThisWorkbook
ChDir wbThis.Path
We have an Excel spreadsheet that sits on the network.
People need to open the file to be able to sign up for various duty rosters.
We would like for the file to open for the first person.
And then for any others after that, get a message that the file is in use
WITHOUT the option to open a read-only copy.
Our staff can't read and they keep opening additional copies of the file!
I have read about sharing the file and I don't think that would make things
any better.
Thanks,
Lynn
People need to open the file to be able to sign up for various duty rosters.
We would like for the file to open for the first person.
And then for any others after that, get a message that the file is in use
WITHOUT the option to open a read-only copy.
Our staff can't read and they keep opening additional copies of the file!
I have read about sharing the file and I don't think that would make things
any better.
Thanks,
Lynn
Is it possible to share a workbook with macros and have the macros work properly. I have one spreadsheet that needs to be shared by many users. We want to all be in the same document at the same time saving changes. The real catch is that the workbook has macros. I used the 'Share Workbook' function under tools. At the end of the setup, it told me that the macros would not work properly. The odd thing is that everytime I try to click on one of the macros I get an error, but yet the macro still performs the function. So essentially the macro works, it is just a pain because you have to click 'end' everytime on the error screen. Any suggestions?
Alanda
Alanda
Hi all,
I've been getting this error on occasion recently.
- It's a shared document
- There is usually 10-12 people using the file at the same time
I've read on the Microsoft Help site that the issue is that somebody is accessing the file while another is trying to open it.
Is there a way, perhaps through VBA, that I can not allow a user to save while somebody else is opening the document? Other suggestions on how to avoid this error?
Thanks!
I've been getting this error on occasion recently.
- It's a shared document
- There is usually 10-12 people using the file at the same time
I've read on the Microsoft Help site that the issue is that somebody is accessing the file while another is trying to open it.
Is there a way, perhaps through VBA, that I can not allow a user to save while somebody else is opening the document? Other suggestions on how to avoid this error?
Thanks!
I have an excel 2007 file sitting in a shared network folder. I only want one user to be able to make changes at a time (any other users would get a read-only). For some reason it currently does not do this, and I have multiple users with the same doc open. I'm concerned that changes will get over-written when 2 people are saving their changes. Can anyone help me with the settings for this.
I have an excel form, I want my users to be able to open the form, fill in appropriate data, then click the save button. When the button is clicked, the data in the form should be saved to a new file and then the original form should be reset (clear all values) for a new set of data entry. When the data is saved, I want the new excel sheet to be saved to a location specified within the macro so the user doesn't have any options and I want the title of the new file to be the value of one of the cells.
I'm new to macros and would appreciate any help this board can offer. Thanks...
I'm new to macros and would appreciate any help this board can offer. Thanks...
Workbook A has a cell that gets data from workbook B as an external link.
It does this using the indirect function because it needs to concatenate the
path and filename from other cells.
Problem is that if workbook B is closed, the cell in workbook A shows #REF!.
So can indirect work using closed external files or must the external files
be opened?
Is there a clever way of making that work?
Thanks!
It does this using the indirect function because it needs to concatenate the
path and filename from other cells.
Problem is that if workbook B is closed, the cell in workbook A shows #REF!.
So can indirect work using closed external files or must the external files
be opened?
Is there a clever way of making that work?
Thanks!
file locked for editing , can I kick the other user out if its my file?
I have made an excel file where other people have to go in and update it. This process takes 2 secs but some people forget and stay in it over lunch etc causing a great annoyance.
Is there anyway I can "kick" them out my file? Im not concerned if they lose any data they've entered as I'm sure this will help them get the message to get out the file quicker..
Its really doing my head in... pls help
I have made an excel file where other people have to go in and update it. This process takes 2 secs but some people forget and stay in it over lunch etc causing a great annoyance.
Is there anyway I can "kick" them out my file? Im not concerned if they lose any data they've entered as I'm sure this will help them get the message to get out the file quicker..
Its really doing my head in... pls help
I did a bit of browsing on this problem. Found others suffering the same but haven't found any conclusive answer yet.
Every so often when I attempt to save a file, (including save as), Excel won'r let me. By won't let me I mean:
using Save doesn't appear to do anything using Save As doesn't either do anything, the dialog is not displayed and if I am doing via the File menu then the File menu is exited and the previous ribbon tab is displayed (i.ethe one I was on before clicking 'File') if I close the workbook I am prompted to save, close without saving or cancel. Clicking save just invokes the same msgbox again. I can't work out when it goes into this mode. Some days I can work without this problem, other days I encounter this 2 or 3 times.
The only thing I could suspect was I think this started around about the time I installed xlDennis' code library. I have uninstalled the addin and so far so good, but I cannot categorically say that this was the cause.
Anyone have any idea?
Cheers
Jon
Edit: I have read this: http://support.microsoft.com/kb/271513
Doesn't seem to cover the issue I describe
Every so often when I attempt to save a file, (including save as), Excel won'r let me. By won't let me I mean:
using Save doesn't appear to do anything using Save As doesn't either do anything, the dialog is not displayed and if I am doing via the File menu then the File menu is exited and the previous ribbon tab is displayed (i.ethe one I was on before clicking 'File') if I close the workbook I am prompted to save, close without saving or cancel. Clicking save just invokes the same msgbox again. I can't work out when it goes into this mode. Some days I can work without this problem, other days I encounter this 2 or 3 times.
The only thing I could suspect was I think this started around about the time I installed xlDennis' code library. I have uninstalled the addin and so far so good, but I cannot categorically say that this was the cause.
Anyone have any idea?
Cheers
Jon
Edit: I have read this: http://support.microsoft.com/kb/271513
Doesn't seem to cover the issue I describe
I have searched and read all the help files. I find the properties of
an object, I see how I can "lock", "size and move with cells" or "not
move with cells". No matter what I select, the object moves off the
screen, when the user, scrolls to the right of the spreadsheet.
Is there a way to lock the position, let's say , in the upper right
corner and have it stay there?
This would be quite useful for an EXIT button, that I have created,
that will close the program without saving (it's a read-only file.)
Thanks to all the wonderful people here that have been so helpful and
give us their valuable insight and time.
Jo
an object, I see how I can "lock", "size and move with cells" or "not
move with cells". No matter what I select, the object moves off the
screen, when the user, scrolls to the right of the spreadsheet.
Is there a way to lock the position, let's say , in the upper right
corner and have it stay there?
This would be quite useful for an EXIT button, that I have created,
that will close the program without saving (it's a read-only file.)
Thanks to all the wonderful people here that have been so helpful and
give us their valuable insight and time.
Jo
This is weird. The Merge functionality is not working, the Button is grayed down.
The sheet/workbook are not protected, nor shared, there is no VBA code in the file...
Does anyone knows what else can it be? Everything else is working fine!!!
thanks
The sheet/workbook are not protected, nor shared, there is no VBA code in the file...
Does anyone knows what else can it be? Everything else is working fine!!!
thanks
I'm having a problem in a workbook with several ActiveX command buttons. I had been using the form control buttons to run macros, but the boss wanted each button to have it's own, different color. So I removed the form control buttons and created new ActiveX command buttons. I got into the button properties and set the background colors. I added the _Click code to run the macros when the user clicked the buttons.
All of the buttons were working fine. Then I saved and closed the workbook and went to lunch. Now when I open the workbook, the buttons don't work! When I click them nothing happens. They appear frozen. They don't even seem to click. No error message. Nothing.
If I right-click the button in Design Mode and select Properties, I get sheet properties not the button properties. I can't seem to locate the command button properties any longer. I still see the button name "cmdButtonGetInfo" and "=EMBED("Forms.CommandButton.1","") in the name box and formula bar. The odd thing is if I create a new button it works fine until I save and close the file. When I reopen the file none of the buttons work.
It's like the buttons are being disabled when I close or open the file. Any suggestions?
All of the buttons were working fine. Then I saved and closed the workbook and went to lunch. Now when I open the workbook, the buttons don't work! When I click them nothing happens. They appear frozen. They don't even seem to click. No error message. Nothing.
If I right-click the button in Design Mode and select Properties, I get sheet properties not the button properties. I can't seem to locate the command button properties any longer. I still see the button name "cmdButtonGetInfo" and "=EMBED("Forms.CommandButton.1","") in the name box and formula bar. The odd thing is if I create a new button it works fine until I save and close the file. When I reopen the file none of the buttons work.
It's like the buttons are being disabled when I close or open the file. Any suggestions?
I have workbook in which I want to save a specific worksheet to a new file with only the values saved - all data in this worksheet are references to cells on another worksheet, which is using VLOOKUP to pull data from a database.
Found the following code and it gets me close, but it copies the cell references, not the values. It also allows me to specify the file name from a cell reference.
I want the new workbook file to simply be saved, not opened, and a message box to display stating where the file was saved (will always be in the same location on the LAN).
What modifications do I make to this to get this to work per above requirements?
Sub CopyMe()
Dim SaveMeAs As String
SaveMeAs = Sheets("Sheet1").Range("B2").Text
Sheets("Sheet3").Copy
ActiveWorkbook.SaveAs Filename:="C:\My Documents\" & SaveMeAs
End Sub
Found the following code and it gets me close, but it copies the cell references, not the values. It also allows me to specify the file name from a cell reference.
I want the new workbook file to simply be saved, not opened, and a message box to display stating where the file was saved (will always be in the same location on the LAN).
What modifications do I make to this to get this to work per above requirements?
Sub CopyMe()
Dim SaveMeAs As String
SaveMeAs = Sheets("Sheet1").Range("B2").Text
Sheets("Sheet3").Copy
ActiveWorkbook.SaveAs Filename:="C:\My Documents\" & SaveMeAs
End Sub
I have a large spreadsheet in Excel 2007. I am converting it to a .csv file to import in to another program. I need to delete all commas from all data.
When I try to replace all commas (with nothing or with another character), I get the error message "The formula you typed contains an error."
I have tried various formats (text, general, etc.) and various file types (.xls,.xlsx, .csv) and still get the same error.
When I try to replace all commas (with nothing or with another character), I get the error message "The formula you typed contains an error."
I have tried various formats (text, general, etc.) and various file types (.xls,.xlsx, .csv) and still get the same error.
I need help desparately. Last night I spent several hours working on an
Excel 2002 spreadsheet and it has disappeared.
I saved it routinely as I was making many changes updates etc. I opened
original file --stuff.xls --- made changes and saved it as again as
stuff.xls. I have done this several times before.
Today, when I go to open stuff.xls, it is nowhere to be found!!!!! I have
done a search, for any file modified since Thurs and nothing has appeared. I
have checked the recycle bin, this did not go into auto recover nothing of
the like. I am just traumatized, because I have NEVER had anything like this
happen before.
I even thought perhaps I didn't save it as often as I thought, (I know that
I did) but I remembered that I saved it at least once and I can't even find
an Excel file that has been modified since Thurs!!!
Does anyone have any idea what could have happened to this file?? BTW, I
have prayed, rebooted, run spybot, called witch doctor, all with no success.
I have never had a file to just disappear with no trace. Any help would be
greatly appreciated.
Thanks in advance---
Excel 2002 spreadsheet and it has disappeared.
I saved it routinely as I was making many changes updates etc. I opened
original file --stuff.xls --- made changes and saved it as again as
stuff.xls. I have done this several times before.
Today, when I go to open stuff.xls, it is nowhere to be found!!!!! I have
done a search, for any file modified since Thurs and nothing has appeared. I
have checked the recycle bin, this did not go into auto recover nothing of
the like. I am just traumatized, because I have NEVER had anything like this
happen before.
I even thought perhaps I didn't save it as often as I thought, (I know that
I did) but I remembered that I saved it at least once and I can't even find
an Excel file that has been modified since Thurs!!!
Does anyone have any idea what could have happened to this file?? BTW, I
have prayed, rebooted, run spybot, called witch doctor, all with no success.
I have never had a file to just disappear with no trace. Any help would be
greatly appreciated.
Thanks in advance---
Is it possible to import a single text file into Excel, splitting the incoming data across multiple worksheets rather than a single worksheet? Each each row on the text file would be evaluated by the value in one of it's "columns" and written to the appropriate worksheet. The file is "!" delimited and has 11 columns for each row.
Currently, I import the file into one worksheet and cut/paste the rows manually into new worksheets/tabs. The files are very large, sometimes exceeding the 65,536 row limit, which I could avoid if the data was split out coming in.
Any help anyone could provide would be WONDERFUL. Thanks!
Currently, I import the file into one worksheet and cut/paste the rows manually into new worksheets/tabs. The files are very large, sometimes exceeding the 65,536 row limit, which I could avoid if the data was split out coming in.
Any help anyone could provide would be WONDERFUL. Thanks!
We have a number of Excel users in our office who cannot copy and paste
between Excel workbooks. They can copy and paste between worksheets. When
you highlight the section to copy and then go to the new workbook both the
paste
and paste special are "grayed out". This is true whether you right-click the
mouse, go to the edit menu, or use control keys. This occurs with any data
type and the most simple workbooks. I have seen some suggestions here but
none have worked for this particular problem. I have reset the menus and
renamed the .xlb files and neither helps. You can open the clipboard and the
paste will work, but there is no paste special option. Any help would be
greatly appreciated. Thanks!
between Excel workbooks. They can copy and paste between worksheets. When
you highlight the section to copy and then go to the new workbook both the
paste
and paste special are "grayed out". This is true whether you right-click the
mouse, go to the edit menu, or use control keys. This occurs with any data
type and the most simple workbooks. I have seen some suggestions here but
none have worked for this particular problem. I have reset the menus and
renamed the .xlb files and neither helps. You can open the clipboard and the
paste will work, but there is no paste special option. Any help would be
greatly appreciated. Thanks!
Hello,
I'm a bit of a newbie with Excel, but...
I have several cells with data that contain both letters and numbers (4H, 8V, 4FH, etc.) What I want to do is remove only the text characters from these cells, and add the remaining number values together among a series of cells with this data type.
If your answer involves using a macro or VB, please provide a link on how to use the formula. I've never used a macro or VB.
Thanks.
I'm a bit of a newbie with Excel, but...
I have several cells with data that contain both letters and numbers (4H, 8V, 4FH, etc.) What I want to do is remove only the text characters from these cells, and add the remaining number values together among a series of cells with this data type.
If your answer involves using a macro or VB, please provide a link on how to use the formula. I've never used a macro or VB.
Thanks.