Move A1 To A2 And A2 To A3.

I recently moved into a new office and I am using a brand new computer on our network. When trying to edit an existing file, I'm not able to select a single cell and type. After clicking on a cell, if I move the mouse at all (even without pressing the left button) it just continues highlighting cells no matter where I move the mouse. I am also not able to click on the tool bars at all. I have to actually Ctrl-Alt_del to get out of the program. I'm sure this is something simple, but I don't know that much about this program. Any help would be greatly appreciated.

I have a textbox in my userform where anything typed in the box is entered into cell A2 in my worksheet. However, multiple lines of text are not properly displayed in my worksheet. I have enabled MultiLine and EnterKeyBehaviour in the properties window of the textbox so I can type multiple lines in my textbox. The problem is that when I press the button to enter the text from my txtbox to cell A2, the cell doesn't actually display the text in separate lines. It just places a square symbol in the place that enter should have been pressed and the text should have been split into separate lines.

How can I get the separate lines of text in my textbox to be properly displayed in a cell? Thanks for your help in advance..

Is there a way that will run the code from a button when the enter key is pressed. Currently the enter key moves to the next text box in the user form.

I have a problem sometimes. I will click on a cell to add information.
The cell turns blue and then wherever I move, it highlights those to.
No matter where I go on the page. If I Alt-Tab and work in another
program on my computer, that excel page keeps highlighting wherever
I move even in those other programs (I know this sounds confusing).
When I return to excel thousands and thousands of cells are blue.


The biggest problem is that the highlighting won't turn off, no matter
what. I can't select anything from the tool bars, do any work on the sheet or close the program.
I can close it only with the task manager but when I open it again,
the cursor is still stuck in the highlighting mode and won't perform any
other functions.

Do you think this is a problem with my computer, the excel program? I have changed my mouse and this didn't help.
Is there some shortcut to turn off this highlight feature other than restarting
my computer. Which is the only current way I can get rid of it.

Thanks for any advice,

Is there a way I can use conditional formatting or something to change the color of the cell once I enter a value or text into that cell? For example if I currently have the A2 cell color as a gray color, and I enter information into A2 can I have it set to automatically change to no fill or any other color without having to click out of the cell, back into it, and then clicking the button?? Does that make sense??? Can someone help me?

Posted this on the Ozgrid forums, but haven't gotten any help yet, so I thought I'd try here too!

I've been having a strange problem lately. I have a fairly lengthy macro that works perfectly most of the time. Occasionally it will run as expected but as soon as the macro ends, excel becomes unresponsive to mouse-clicks. When I click anywhere (trying to select a cell, or an excel menu item...clicking anywhere in excel) I'll get the a 'ding' system sound and nothing will happen. BUT, if I use the keyboard arrow keys, I can see that the active cell selection moves accordingly. Then it gets really strange - when I have a cell highlighted and press any key to input text, it gets duplicated. So if I press "s' it will input "ss" into the cell, and then when I press enter it will auto-move to the next cell down, but nothing ends up getting saved into the previous cell.

I don't understand what's going on at all. I can't think of anything in my macro that would have these kinds of effects. I've made sure that screenupdating is turned back on at the end of every procedure. If I go into the VBE, I can manually run procedures and they all work fine. The only way I've been able to get back to normal is by force closing excel altogether and re-opening. Any ideas?

______________________

Still having trouble, and the same thing is happening with this workbook on two different computers, so I don't think it's a hardware, or OS specific issue. When it gets locked up like this, I can still do anything in the VBE (edits cells, run macros, etc.) with no problems. If I'm in the excel window, I can click alt on the keyboard and the shortcut keys for the menu come up, but I can't go deeper than that by clicking the letter shortcuts, they do nothing. If I use the delete key to delete the contents of a cell, then it gets deleted. But if I type anything else (numbers, letters, or symbols) then it types 2 instances of the key every time, yet when I hit enter, nothing changes in the cell. I also can't really bring focus to the excel window if something else (ie. the VBE) is on top of it, clicking into the excel window just gives the little system 'ding' sound and nothing happens.

If I hit the save button in the VBE (since I can't click anything in the excel window), then it seems to snap out of it and go back to normal. I tried searching for anything simmilar to this and can't find anything...

Any help would be much appreciated. This is driving me nuts!

Hey guys,

I'm trying to write a macro which prints to PDF and saves the file name as the contents of a cell. I've been looking through all the posts currently on this forum to get something working. I'm using the following code -

Sub PrintPDF()
Filename = "C:\Documents and Settings\samb\My Documents\" & ActiveSheet.Range("Z1").Value
SendKeys Filename & "{ENTER}", False
ActiveWindow.SelectedSheets.PrintOut Copies:=1, ActivePrinter:= _
"Adobe PDF:", Collate:=True
End Sub

The macro prints to PDF, but then it stops at the Save As stage, where I have to manually enter the name of the file and click Save. I want the macro to automatically name the file with the contents of cell Z1. I then want it to then automatically press enter. Any ideas where I'm going wrong? Any help would be much appreciated!

From limited experience I know that excel calculates dates via serial numbers.

I have formulas to add a number of days to a cell containing an entered date and display the resulting new date (ie. 03/01/2011 (c34)+11 = 03/12/2011)

I am seeking to leave resulting formula cell blank until a date is entered in the input cell. Currently when the input cell is empty the formula cell obviously displays 1/11/1900 using the above example.

What conditional format would achieve leaving the formula cell blank until date data in entered into the source cell?

Hopefully a simpler question for your experience level than mine.

Hi All,

I am trying to make excel automatically add a leading zero to values which are 5 digits long;

i.e. number input is 15185, then excel automatically changes it to 015185.

If I put a Customer Number Format of 0##### it works, however, a user could put any length of number into these cells, and if the number is less than 5 digits I don't want a leading zero.

Is there any way of writing a small macro to sort this out.

The numbers would be input into range B16:223.

Many thanks,


Andy

Is it possible to have numbers added to the same cell and have excel continue
to calculate the addition for me in that same cell......ex: I have the number
8 in cell d2 and I want to add the number 8 to that cell and have excel add
the 8 to the previous 8 for a total of 16 in the same cell.....the next time
I would add 5, and the total would be 21? Can this be done in a single cell?

I have set a VLOOKUP formula to match account numbers. How ever I have to
click double click on the cell before the formula recognises the account
number. I have to do this for each cell. I have tried different formats. It
is not saving me that much time.

I am trying to automatically capture and record the date of a cell's last change in value (date stamp). I have an item price list and if a particular cell gets updated I want to automatically record the date of change of that cell. I realize that after I change cell A1 I could tab to cell B1 and enter Ctrl+; but if I have a hundred new prices to enter I don't want to do that (plus me or the data entry person might forget).

For instance,

A B
1 $32.17 8/17/08
2 $43.20 9/12/09

If I go in and update cell A1 to $33.98 today I would like cell B1 to read 2/16/10. But I don't want cell B2 to change.


Thanks

I have a spreadsheet with simple (addition/subtraction) formulas. The file is quite large and the formulas are too. All of a sudden, the formulas stopped working except when I double click in the cell containing the actual formula. For example, if I enter "2" in each cell, A2 and B2, cell B3 should reflect "4" because there is a formula in cell B3 which totals cells A2 and B2. Only by double clicking on cell B3 will the program actually calculate. I'm totally perplexed and so is my IT contact. Anyone?

Hello,

I am new to using Excel and I am not very computer literate. I am looking for some help with a spreadsheet I am making. Here is the problem:

I have a column of 14 numbers in cells A1 to A14. If all of these values are less than 2%, I would like a "Pass" to display in cell B1. If any of these values are greater than 2% I would like a "Fail" to display in cell B1.

I have got a formula that works for a single cell but I can't figure out how to get it to apply to more than one cell. For example, I have entered =IF(A1<2,"Pass","Fail") in cell B1. Now if the value I enter in A1 is less than 2, it shows a "Pass", and if the value in A1 is greater than 2 it shows a "Fail" in cell B1. How can I get this to apply to all of the cells from A1 to A14?

If somebody could help me out that would be great.

Thanks,
Randy

when I type a number or letter into a cell and then press enter the cursor
jumps way down the page to what appears to be a random cell. The one i
originaly typed in remains blank. spreadsheet was previously ok this has
just started to happen.

help please
thanks