Excel Password Protection Error

I know this question has been asked a bajillion times, so I apologize for the redundancy.

I am working with an Excel spreadsheet and saving it as a .csv file in order to upload to an application that parses out the .csv data as transactions. The system requires .csv files, so this is how I need to save my doc (with this extension). I have been successful at preventing Excel from coverting that long number into scientific format. I have saved as a TXT file, pasted the longer number and it displays correctly. That is all good. But I have to save as a .csv. So if I do that, close the Excel window, and then open again (as the .csv file), the numbers are back to being displayed in scientific format. I have tried creating an Excel doc from scratch and entering text in Text format, to see if this created a cleaner file. But again, the second I save as .csv, close the window and then open that file up again, that dang scientific format is back.

Does anyone have any idea of how to work around this? Once I have successfully gotten the numbers to display as the long-chain number, how can I get them to "stick" so that they don't revert back to scientific format when I reopen the file?

Thanks so much for your help!

Hi all,

I've been getting this error on occasion recently.

- It's a shared document
- There is usually 10-12 people using the file at the same time

I've read on the Microsoft Help site that the issue is that somebody is accessing the file while another is trying to open it.

Is there a way, perhaps through VBA, that I can not allow a user to save while somebody else is opening the document? Other suggestions on how to avoid this error?

Thanks!

I'm trying to use VBA to go to a website that requires a User Name, Password, and a Submit Button.

So far I can get everything to work besides the Submit part. The code runs without errors, but doesn't actually "hit" the submit button on the webpage.

For posting, I removed my actual user name and password and and used the generic " User Name " and " Password " highlighted in blue.

I highlighted another section in green that I took from a previous post hoping it would solve my problem. The link is: http://www.mrexcel.com/forum/showthr...xplorer+submit


Here is the code I am using:

Sub GoToWebSiteAndPlayAroundNew()

Dim appIE As Object ' InternetExplorer.Application
Dim URL As String


Set appIE = CreateObject("InternetExplorer.Application")
URL = " https://efolio.morgankeegan.com/escripts/defaultLogon.asp?errCode=2 "


With appIE
.navigate URL
.Visible = True

Do While .busy: DoEvents: Loop
Do While .ReadyState 4: DoEvents: Loop

.document.getelementbyid("fUserName").Value = " UserName "
.document.getelementbyid("fPassword").Value = " Password "

End With


On Error Resume Next
x = 0
For Each mitem In IE.document.all
mitem.Value = "x"
x = x + 1
Next

x = 0
For Each mitem In IE.document.all
If x = "Submit" Then
mitem.Click
Exit For
End If

Next

End Sub

We have an Excel spreadsheet that sits on the network.
People need to open the file to be able to sign up for various duty rosters.
We would like for the file to open for the first person.
And then for any others after that, get a message that the file is in use
WITHOUT the option to open a read-only copy.
Our staff can't read and they keep opening additional copies of the file!
I have read about sharing the file and I don't think that would make things
any better.
Thanks,
Lynn

Hello,

I have a number of different files that I often need to run a macro on. In order for me to do it on the 75-100 files I have at any given time, I need to open one, run the macro, close and save, then open the next one.

Is it possible to write a macro that will start with the first file in a folder, open it and update links, run a macro, save and close, and open the next file in the folder until it has open all the files in the folder.

I have experience with creating macros that reference different workbooks, but not sure how to go about opening files with different filenames (without referencing the exact filename).

I'd like to be able to have basic code for opening, saving and closing, opening next file, saving and closing, etc. and input the macro I'd need to run in each file in the appropriate location. Is this possible? Any help is greatly appreciated!!

Thanks,
Jason

I have a file that became too big due to phantom bloat, unused range saved by Excel and all that kind of reasons. Thank to previous posts on that board tackling that issue, I was able to find how to proceed to reduce the file back to its normal size.
But I did so in a beta file (test file). The real file has become so big (103MB!) that Excel cannot even open it anymore! The file contains archive info that we do not have anywhere else.
Is there anyway then to open the file or to reduce its size without opening it (through magics...)? I just honestly don't know how to retrieve that info before deleting that file.

Thank you very much for your help.

I have an excel 2007 file sitting in a shared network folder. I only want one user to be able to make changes at a time (any other users would get a read-only). For some reason it currently does not do this, and I have multiple users with the same doc open. I'm concerned that changes will get over-written when 2 people are saving their changes. Can anyone help me with the settings for this.

I'm trying to open a pdf file from within excel vba. I have tried using the followhyperlink method but adobe acrobat opens very briefly then immediately closes Code:

Sub OpenPDF()

'Dim pdf As String

    On Error Resume Next

    'pdf file to open
    pdf = "K:\PDF\mypdf.pdf"

    'open the pdf file
    ActiveWorkbook.FollowHyperlink pdf

End Sub

So then I tried to create an instance of acrobat by setting a reference to the acrobat object but I can't get this to work either!

The code I'm using is Code:

Sub OpenPDF()

    Dim pdf As AcroPDDoc
    Dim strPDF As String

    Set pdf = CreateObject("AcroExch.PDDoc")
    
    'pdf file to open
    strPDF = "K:\PDF\mypdf.pdf"

    'open the pdf file
    pdf.Open strPDF

End Sub

Any ideas what could be wrong with either approach?

Thank-you

I'm having a problem in a workbook with several ActiveX command buttons. I had been using the form control buttons to run macros, but the boss wanted each button to have it's own, different color. So I removed the form control buttons and created new ActiveX command buttons. I got into the button properties and set the background colors. I added the _Click code to run the macros when the user clicked the buttons.

All of the buttons were working fine. Then I saved and closed the workbook and went to lunch. Now when I open the workbook, the buttons don't work! When I click them nothing happens. They appear frozen. They don't even seem to click. No error message. Nothing.

If I right-click the button in Design Mode and select Properties, I get sheet properties not the button properties. I can't seem to locate the command button properties any longer. I still see the button name "cmdButtonGetInfo" and "=EMBED("Forms.CommandButton.1","") in the name box and formula bar. The odd thing is if I create a new button it works fine until I save and close the file. When I reopen the file none of the buttons work.

It's like the buttons are being disabled when I close or open the file. Any suggestions?

I have an excel form, I want my users to be able to open the form, fill in appropriate data, then click the save button. When the button is clicked, the data in the form should be saved to a new file and then the original form should be reset (clear all values) for a new set of data entry. When the data is saved, I want the new excel sheet to be saved to a location specified within the macro so the user doesn't have any options and I want the title of the new file to be the value of one of the cells.

I'm new to macros and would appreciate any help this board can offer. Thanks...

I need help desparately. Last night I spent several hours working on an
Excel 2002 spreadsheet and it has disappeared.

I saved it routinely as I was making many changes updates etc. I opened
original file --stuff.xls --- made changes and saved it as again as
stuff.xls. I have done this several times before.

Today, when I go to open stuff.xls, it is nowhere to be found!!!!! I have
done a search, for any file modified since Thurs and nothing has appeared. I
have checked the recycle bin, this did not go into auto recover nothing of
the like. I am just traumatized, because I have NEVER had anything like this
happen before.

I even thought perhaps I didn't save it as often as I thought, (I know that
I did) but I remembered that I saved it at least once and I can't even find
an Excel file that has been modified since Thurs!!!

Does anyone have any idea what could have happened to this file?? BTW, I
have prayed, rebooted, run spybot, called witch doctor, all with no success.

I have never had a file to just disappear with no trace. Any help would be
greatly appreciated.

Thanks in advance---

I have found similar posts on the forum, but nothing without use of a userform.

I have the following code:

Code:

 
Sub Development()
    Pass = InputBox("Please enter development password", "Password")
    If Pass = "XYZ" Then
        UnhideAll
    Else: MsgBox ("Password incorrect, please try again")
    End If
End Sub

This works, but I want to hide the text as it is entered.
Is there a way I can enter this as a property? i.e. inputbox.text.property = ... or something?? I've tried what seems intuitive, but nothing works.

Help!

I get the error message "reference is not valid" each time I open my spreadsheet. I get this message three times, and once I am done clicking ok on all three of them, my spreadsheet works just fine. The problem is, I have to send it to a bunch people.

I have a sheet with raw data a sheet with pivot tables a sheet with a dashboard and a simple macro
I don't have any #REF cells either.

Someone has any idea of what could be the problem?

thanks

NA

Is there a way to lets say go to www.gmail.com and automatically have VBA fill in the user name and password ? I am trying to automate login for my co workers to a certain site. Just havent been able to find out how. PLZ HELP !!

I was wondering if there is a way of getting a macro to open the "save as" dialogue box and then have it fill in the "file name" field.

I dont want it to actually make the save though as I want the user to have the chance to check that the save location is correct and the option to change the filename if required.

Cheers.