How To Search For A Word And Replace Entire Cell With Another Word |
How To Search For A Word And Replace Entire Cell With Another Word - Excel |
|
I've seen many examples of finding and replacing a specific text string. However, I want to find a word within a cell, then replace the entire cell with another word.
The searched cells may contain more than one word beyond the one I'm looking for.
I have this:
Sub FindData1ReplaceData2()
ActiveSheet.Activate
Cells.Replace What:="A", Replacement:="B", LookAt:=xlPart, _
SearchOrder:=xlByRows, MatchCase:=False
End Sub
My cell may contain 'abcd'. This routine just replaces the 'a' with 'b' and the cell becomes 'bbcd'. I only need 'b' in the cell.
Seems pretty easy, but can't find the solution...
The searched cells may contain more than one word beyond the one I'm looking for.
I have this:
Sub FindData1ReplaceData2()
ActiveSheet.Activate
Cells.Replace What:="A", Replacement:="B", LookAt:=xlPart, _
SearchOrder:=xlByRows, MatchCase:=False
End Sub
My cell may contain 'abcd'. This routine just replaces the 'a' with 'b' and the cell becomes 'bbcd'. I only need 'b' in the cell.
Seems pretty easy, but can't find the solution...
Excel VBA Course - From Beginner to Expert
200+ Video Lessons 50+ Hours of Instruction 200+ Excel Guides
Become a master of VBA and Macros in Excel and learn how to automate all of your tasks in Excel with this online course. (No VBA experience required.)
(80% Discount Ends Soon!)
Similar Topics
I need to find data in two different formats within a column
Examples
Webb Christopher
Greer Nancy
I need to find cells with text that have more than one space between the first and last names; and cells with text that have only one space between the first and last names.
I am fairly new to excel. I can find the space after the first word but cannot tell it to find ones that say have a space then another string of text.
Thank you for your help!
Examples
Webb Christopher
Greer Nancy
I need to find cells with text that have more than one space between the first and last names; and cells with text that have only one space between the first and last names.
I am fairly new to excel. I can find the space after the first word but cannot tell it to find ones that say have a space then another string of text.
Thank you for your help!
Hi, hope someone can assist, i want to add some arrow syimbols in to a formula, so that when the formula works out it shows an up arrow for higher or a down arrow for lower, i am using this formula at the moment because i dont know any better but it works, putting in the word up or down:
I have entered the following formula in to a cell: =IF(S3<R3,"DOWN","UP") it works however i want to replace the word Down and up with the relevant arrows symbol. How do i do this?
Thanks
I have entered the following formula in to a cell: =IF(S3<R3,"DOWN","UP") it works however i want to replace the word Down and up with the relevant arrows symbol. How do i do this?
Thanks
How do I get the colors to change automatically when I use a drop down list.
Per say here is what I am trying to do
If a certain "word" is used from the drop down list I want the background of
that cell to change its color to "green." And if later I change the "word" to
another from the drop down list, it will change it's color to a specified
color.
The drop down list that I use was created from cells that have the colors
already in the "word", but I do not know how to make the list show the colors
so it puts the word & color automatically in the drop down list to the cell
with the drop down (if that makes any sense).
If there is a way, please spell it out simple enough for me to understand,
as I don't know fully the capabilities of formulas or vba.
Per say here is what I am trying to do
If a certain "word" is used from the drop down list I want the background of
that cell to change its color to "green." And if later I change the "word" to
another from the drop down list, it will change it's color to a specified
color.
The drop down list that I use was created from cells that have the colors
already in the "word", but I do not know how to make the list show the colors
so it puts the word & color automatically in the drop down list to the cell
with the drop down (if that makes any sense).
If there is a way, please spell it out simple enough for me to understand,
as I don't know fully the capabilities of formulas or vba.
Okay, so I tried (for hours) to find a solution to this and have finally gotten frustrated to the point where i think asking here will be my best bet.
Basically I want to export data from excel worksheets to various places on a word document I had. I have created a word template as well as bookmarks for that template, as that seems to be the recommendation for performing such a task with excel.
My problem is ... Now what?
I basically have 1 constant worksheet that contains all my affiliates info (Name, Address etc), which i'd like to use to populate some bookmarks in my word template, and then i have another worksheet for the previous month, indicating sales etc for that affiliate. I intend on adding a new worksheet every month that i would use to create new invoices.
Furthermore, i'd really like to be able to update a new file (or perhaps a new page on the same file) for each company with the use of a button, similar to the one's you'd see in an access form.
Can anyone help? Let me know if you need me to clarify.
Thanks!
Matt
Basically I want to export data from excel worksheets to various places on a word document I had. I have created a word template as well as bookmarks for that template, as that seems to be the recommendation for performing such a task with excel.
My problem is ... Now what?
I basically have 1 constant worksheet that contains all my affiliates info (Name, Address etc), which i'd like to use to populate some bookmarks in my word template, and then i have another worksheet for the previous month, indicating sales etc for that affiliate. I intend on adding a new worksheet every month that i would use to create new invoices.
Furthermore, i'd really like to be able to update a new file (or perhaps a new page on the same file) for each company with the use of a button, similar to the one's you'd see in an access form.
Can anyone help? Let me know if you need me to clarify.
Thanks!
Matt
I would like to copy a small table from Word into one cell in an Excel
worksheet. The first column of the table is a list of numbers. I tried
converting the table into text with manual line breaks and tab stops to
divide columns and rows, but that didn't solve my problem.
Excel pastes the data into several rows. When I try to merge them, I
get a warning that the selection contains multiple data values, and
merging into one cell keeps the upper-left most data only.
What I tried that didn't work:
* Formatting the Excel cells as text before pasting the data.
* The various options for "Paste Special." The closest I got was
inserting the table as a Document Object, which could be a workaround,
I guess.
What I am saving for when all else fails:
* The obvious solution of copying row by row into one Excel cell.
The data in the table is information about my dad's medications. I
would like to have reference charts of how to identify the strength of
each tablet by its color and markings. I got the info from the
manufacturers' websites and entered it into tables in Word, which I
would like to copy into a more comprehensive file I am creating in
Excel. The first column of each table is the strength of the tablet,
entered as 1 mg., 2 mg., etc. The subsequent columns describe the
shape, color, and markings. There are 3 tables, each with about 4-5
rows.
Is there a way to copy each one - whether as a table or as text - into
a single Excel cell without losing data?
Many thanks.
worksheet. The first column of the table is a list of numbers. I tried
converting the table into text with manual line breaks and tab stops to
divide columns and rows, but that didn't solve my problem.
Excel pastes the data into several rows. When I try to merge them, I
get a warning that the selection contains multiple data values, and
merging into one cell keeps the upper-left most data only.
What I tried that didn't work:
* Formatting the Excel cells as text before pasting the data.
* The various options for "Paste Special." The closest I got was
inserting the table as a Document Object, which could be a workaround,
I guess.
What I am saving for when all else fails:
* The obvious solution of copying row by row into one Excel cell.
The data in the table is information about my dad's medications. I
would like to have reference charts of how to identify the strength of
each tablet by its color and markings. I got the info from the
manufacturers' websites and entered it into tables in Word, which I
would like to copy into a more comprehensive file I am creating in
Excel. The first column of each table is the strength of the tablet,
entered as 1 mg., 2 mg., etc. The subsequent columns describe the
shape, color, and markings. There are 3 tables, each with about 4-5
rows.
Is there a way to copy each one - whether as a table or as text - into
a single Excel cell without losing data?
Many thanks.
For some reason - I can not type the same word and have it automatically come
up the next time when I enter it will not automatically come up. I must of
lost that option some how. Please help
up the next time when I enter it will not automatically come up. I must of
lost that option some how. Please help
Hello ,
Here is my issue:
I have a list of SKUs in Excel and I need to add one same word to 500 cells that have pre-existing text in the cells. See example below:
1) List of SKU's in cells:
34
35
39
55
2) text that needs to be added IN FRONT of every number:
DF
So the result would be:
DF34
DF35
DF39
etc.
How do I do that in a formula and not manually? I found another similar thread and I understand how to do it from the instructions there but the same text goes on the back and the result is: 34DF but I need it to be like: DF34.
I am using Office 2007 for mac.
Thank you for the help,
Chris
Here is my issue:
I have a list of SKUs in Excel and I need to add one same word to 500 cells that have pre-existing text in the cells. See example below:
1) List of SKU's in cells:
34
35
39
55
2) text that needs to be added IN FRONT of every number:
DF
So the result would be:
DF34
DF35
DF39
etc.
How do I do that in a formula and not manually? I found another similar thread and I understand how to do it from the instructions there but the same text goes on the back and the result is: 34DF but I need it to be like: DF34.
I am using Office 2007 for mac.
Thank you for the help,
Chris
Still learning VBA - I am trying to delete an entire row based on a condition in one cell in the row. Typically I would just filter on that value and delete the rows, but I am not sure if that is a possibility in VBA code. Can you provide the code if not too complex.
Select Cell A1 if value is 100 delete entire row, else skip to next row. Then loop through each row in the spreadsheet till all rows with selected cell equal to 100 are deleted.
Select Cell A1 if value is 100 delete entire row, else skip to next row. Then loop through each row in the spreadsheet till all rows with selected cell equal to 100 are deleted.
I would like to create a formula that removes a specific character if it appears in a cell. In this case, if the text in the name cell starts with * or #, remove it. Otherwise, keep the contents intact. Examples:
Code:
Is there a formula that will get me where I want to be?
Thanks!
Chuck
Code:
Text in Cell Desired Results *Bobby Abreu Bobby Abreu #Erick Aybar Erick Aybar Jason Bartlett Jason Bartlett
Is there a formula that will get me where I want to be?
Thanks!
Chuck
Corporate edict.
I have a worksheet that is locked and protected now, except for cells in a certain collumn. I have named the cells in that column "MS96A".
If a user enters a date in a cell or range of cells anywhere in the column, the changed cells also need to be locked and protected (Once they enter a date, it is not allowed EVER to be changed again. Corporate requirement! *Shrug*).
What I am looking for is this. If the user selects that cell again, they will get the usual pop-up message, "The cell or chart that you are trying to change is protected..."
I think I am close, but I am getting an "End If without block If" error on the If Clause.
Sub Worksheet_Change(ByVal Target As Excel.Range)
Dim MRange As Range
Set MRange = Range("MS96A")
' If Not Intersect(Target, MRange) Is Nothing Then For Each cell In MRange Sheets("Sheet1").Unprotect Password:="temp"
cell.Interior.ColorIndex = 3
cell.Font.Color = vbBlack
Selection.Locked = True
Selection.FormulaHidden = False
Next cell
ActiveSheet.Protect Password:="temp", _
DrawingObjects:=False, _
Contents:=True, _
Scenarios:=False
ActiveSheet.EnableSelection = xlUnlockedCells
End Sub
I have a worksheet that is locked and protected now, except for cells in a certain collumn. I have named the cells in that column "MS96A".
If a user enters a date in a cell or range of cells anywhere in the column, the changed cells also need to be locked and protected (Once they enter a date, it is not allowed EVER to be changed again. Corporate requirement! *Shrug*).
What I am looking for is this. If the user selects that cell again, they will get the usual pop-up message, "The cell or chart that you are trying to change is protected..."
I think I am close, but I am getting an "End If without block If" error on the If Clause.
Sub Worksheet_Change(ByVal Target As Excel.Range)
Dim MRange As Range
Set MRange = Range("MS96A")
' If Not Intersect(Target, MRange) Is Nothing Then For Each cell In MRange Sheets("Sheet1").Unprotect Password:="temp"
cell.Interior.ColorIndex = 3
cell.Font.Color = vbBlack
Selection.Locked = True
Selection.FormulaHidden = False
Next cell
ActiveSheet.Protect Password:="temp", _
DrawingObjects:=False, _
Contents:=True, _
Scenarios:=False
ActiveSheet.EnableSelection = xlUnlockedCells
End Sub
Hi there,
I'm very new to Excel, and I'm having trouble figuring a few things out. Hopefully this will be very easy for you guys!
In Sheet 1, I have a column of cells that I would like to also appear in Sheet 2. If I add a new row to the column in Sheet 1, I would also like it to be updated automatically in Sheet 2. Currently, I can get it to show the contents of individual cells from Sheet 1 in Sheet 2 by using this formula in the formula bar for each cell in Sheet 2:
=Sheet1!A3 (or whichever cell it is)
That's fine, but I'd like to just have a formula that will reproduce the entire column (ie. without a fixed range, as new rows are going to be added to the column).
If anyone could point me in the right direction, I'd be very very grateful. Thanks.
I'm very new to Excel, and I'm having trouble figuring a few things out. Hopefully this will be very easy for you guys!
In Sheet 1, I have a column of cells that I would like to also appear in Sheet 2. If I add a new row to the column in Sheet 1, I would also like it to be updated automatically in Sheet 2. Currently, I can get it to show the contents of individual cells from Sheet 1 in Sheet 2 by using this formula in the formula bar for each cell in Sheet 2:
=Sheet1!A3 (or whichever cell it is)
That's fine, but I'd like to just have a formula that will reproduce the entire column (ie. without a fixed range, as new rows are going to be added to the column).
If anyone could point me in the right direction, I'd be very very grateful. Thanks.
Is there a trick to copy-paste a group of cells into Outlook? I don't want to paste as a picture (shows up as an attachment and is lost when someone else Replies), but formatting is skewed when pasted as an Excel object. Right now I'm recreating the table in Word, then pasting, which doesn't loose formatting.
A specific problem is cells which don't have borders show up with very light grey borders in Outlook. This, I do not want.
TiA
A specific problem is cells which don't have borders show up with very light grey borders in Outlook. This, I do not want.
TiA
I have an excel worksheet that adds two other worksheets in a data
triangle. I copied it to create a new data set and used find &
replace to change the worksheet references to the new ones.
The cells still contain the result of the old formula referring to the
previous worksheets. The only way I can get the formula to return the
correct result is to edit (F2) each cell and press enter. Calc now
(F9) does nothing.
I've seen this before, but this time, I need to calculate many
thousands of cells and don't have time for this workaround.
Any ideas?
Thanks.
Don S
triangle. I copied it to create a new data set and used find &
replace to change the worksheet references to the new ones.
The cells still contain the result of the old formula referring to the
previous worksheets. The only way I can get the formula to return the
correct result is to edit (F2) each cell and press enter. Calc now
(F9) does nothing.
I've seen this before, but this time, I need to calculate many
thousands of cells and don't have time for this workaround.
Any ideas?
Thanks.
Don S
Hi everyone,
I found an excellent macro this morning that allows the user to filter a pivot table based on the value found in a specific cell. This cell essentially acts as a search bar, allowing the user to type in what they are looking for rather than select it from a drop-down list.
The macro works perfectly for my purposes except in one regard: I can no longer perform a "show all" filter. If I leave the "search bar" cell blank, the pivot table shows nothing. I'm sure that there is an easy fix for this but I'm still learning the basics of how to write and use macros. How can I change the code so that when I leave the cell blank, the pivot table shows all? The search bar cell is D2.
Thanks for your time!
I found an excellent macro this morning that allows the user to filter a pivot table based on the value found in a specific cell. This cell essentially acts as a search bar, allowing the user to type in what they are looking for rather than select it from a drop-down list.
The macro works perfectly for my purposes except in one regard: I can no longer perform a "show all" filter. If I leave the "search bar" cell blank, the pivot table shows nothing. I'm sure that there is an easy fix for this but I'm still learning the basics of how to write and use macros. How can I change the code so that when I leave the cell blank, the pivot table shows all? The search bar cell is D2.
Thanks for your time!
Hi folks,
My problem is Tab no longer moves your active cell selection one to the right. It now moves to the last cell in your spreadsheet to the right (similar to CTRL+Arrow Key Right).
I seem to remember this being a simple setting you can change, but was unable to find it myself, or search the web for the way out. So my last result is asking the experts .
Do any of you know how to make it so Tab goes back to just moving one cell to the right again?
Thanks in advanced.
My problem is Tab no longer moves your active cell selection one to the right. It now moves to the last cell in your spreadsheet to the right (similar to CTRL+Arrow Key Right).
I seem to remember this being a simple setting you can change, but was unable to find it myself, or search the web for the way out. So my last result is asking the experts .
Do any of you know how to make it so Tab goes back to just moving one cell to the right again?
Thanks in advanced.
I saw two threads in this forum that asked this question, with no good answer. I am posting this solution for anybody still struggling with this.
The question:
How can you prevent a cell's contents from overflowing into the next cell?
Of course, you can make the column wider or turn on text wrapping, but you might not want to. Each of those solutions can mess up the layout of your sheet. You may just want to truncate the value.
Some people have suggested putting a space in the next cell. This is unnecessary, a pain in the but, and will mess up any ISBLANK type formulas, among other things.
The solution:
Select the cells in question and turn on text wrapping (Format>Cells>Alignment>Wrap Text).
Now select the row(s) in question and manually set the row height, by right clicking the row number and selecting "Row Height". Check the height of an adjacent row for a good value.
Your cells will now not spill over either horizontally or vertically. They will simply truncate anything that doesn't fit.
Be careful now, because parts of your data may be hidden. This can cause its own set of problems if one or two digits are neatly hidden away. Think ahead if other people might be using this sheet, and not be expecting to have some data hidden.
Tested in Excel 2002
The question:
How can you prevent a cell's contents from overflowing into the next cell?
Of course, you can make the column wider or turn on text wrapping, but you might not want to. Each of those solutions can mess up the layout of your sheet. You may just want to truncate the value.
Some people have suggested putting a space in the next cell. This is unnecessary, a pain in the but, and will mess up any ISBLANK type formulas, among other things.
The solution:
Select the cells in question and turn on text wrapping (Format>Cells>Alignment>Wrap Text).
Now select the row(s) in question and manually set the row height, by right clicking the row number and selecting "Row Height". Check the height of an adjacent row for a good value.
Your cells will now not spill over either horizontally or vertically. They will simply truncate anything that doesn't fit.
Be careful now, because parts of your data may be hidden. This can cause its own set of problems if one or two digits are neatly hidden away. Think ahead if other people might be using this sheet, and not be expecting to have some data hidden.
Tested in Excel 2002
I have set up an excel file that helps put together different text components using the vlookup and concatenate formulas for use in one plain text document .
When I try to paste the finished result into notepad/textpad/word it adds extra double quote marks throughout the text. Does anyone know how to paste it without these marks?
Thanks!
When I try to paste the finished result into notepad/textpad/word it adds extra double quote marks throughout the text. Does anyone know how to paste it without these marks?
Thanks!
Hi everyone,
I'm going nuts trying to figure out how to autofill text from one cell
to another. For example, everytime I type text into cell A20, I want
the exact same thing to cell BL20. The same for B20, BL20, etc.
How do I go about that? I already know how to copy formulas from one
cell to another by dragging the skinny black line of the cell. I guess
I just need the formula for a simple IDENTICAL copying of text.
Thanks in advance,
Mike
I'm going nuts trying to figure out how to autofill text from one cell
to another. For example, everytime I type text into cell A20, I want
the exact same thing to cell BL20. The same for B20, BL20, etc.
How do I go about that? I already know how to copy formulas from one
cell to another by dragging the skinny black line of the cell. I guess
I just need the formula for a simple IDENTICAL copying of text.
Thanks in advance,
Mike
Hello All
I wonder if you could help with this one, I have a list of data like this (no spaces or other characters)
JN551122B
What I need to do is split each of the characters in to its own cell
if JN551122B was in cell A1 I'd want to return:
B2 C2 D2 E2 F2 G2 H2 I2 J2
J N 5 5 1 1 2 2 B
The nearest I have got is the right function, but it brings over the preceeding characters, and I need each character in its own cell. Hopefully I could copy/paste a formula and change the reference for each cell value, i.e. 1 would return J, 2 = N, 3 = 5, 4 = 5 etc.
Thanks for your help!
I wonder if you could help with this one, I have a list of data like this (no spaces or other characters)
JN551122B
What I need to do is split each of the characters in to its own cell
if JN551122B was in cell A1 I'd want to return:
B2 C2 D2 E2 F2 G2 H2 I2 J2
J N 5 5 1 1 2 2 B
The nearest I have got is the right function, but it brings over the preceeding characters, and I need each character in its own cell. Hopefully I could copy/paste a formula and change the reference for each cell value, i.e. 1 would return J, 2 = N, 3 = 5, 4 = 5 etc.
Thanks for your help!
Hi all, the title pretty much says it all, I have a form where I am trying to create a button that will pop up a window where the user will browse to the desired folder and once that folder is selected, the path will be copied as a text string into the cell adjacent. My command Button cell is in B3 and the path should be shown in C3.
Can anyone help?
Thanks
Can anyone help?
Thanks