Excel Forum
Close Window   
Free Ebook
Get Your Free Excel
ebook!
Top 15 Excel Tutorials
Instant Access!
E-mail:

Active Cell After Pressing The Enter Key

Hello, everyone. I started learning Excel 2003 a week ago and I have a basic quesion. I will be very thankful for your reply.

Whenever I press the Enter Key after entering data in a cell, the cell below is selected. I want Excel selected the cell right to the cell that I just entered data after I pressed the Enter. How should I set it in Excel 2003?

Thank you for your reply.

RealNewbie


Free Excel Help Forum

- Ask any question about Excel and have it answered in no time.

Similar Excel Tutorials

Quickly Enter the System Date in Excel - Keyboard Shortcut
You can insert the system Date by holding the Control (Ctrl) key and pressing the colon or semicolon key. (Ctrl+;) ...
Select Cells in Excel using Macros and VBA
This is actually a very easy thing to do and only requires a couple lines of code. Below I will show you how to sel ...
Get the Name of a Worksheet in Macros VBA in Excel
How to get the name of a worksheet in Excel using VBA and Macros and also how to store that name in a variable for ...
Close Excel Workbook using VBA Macros
How to close an Excel workbook using VBA and macros, including how to save the file before you close it or discard ...

Helpful Excel Macros

Enter Text/Characters with a Double-Click of the Mouse
- This macro allows you to enter any text or number, that you specify, in a cell on which you double-click. In the exampl
Add an Input Message to a Cell - Message Appears When the Cell is Selected in Excel - Data Validation Macro
- Add data validation input messages to cells in Excel with this free Excel macro. These messages appear when a specific
Filter Data Sets on Multiple Columns with Multiple Criteria at Once in Excel - AutoFilter
- This Excel macro allows you to filter a data set on multiple columns and criteria at once. This means that you can filt
Print Selected Worksheets in Excel
- This free excel macro will print all selected worksheets in Excel. If there are no other worksheets selected the active
Basic Web Query in Excel - Import Data from the Web into Excel
- Import data from the web into Excel with this macro. This is a basic web query macro that will import data from any web

Similar Topics







Hi,

I am entering lots of family history data into a spreadsheet. At the simplest I have columns (in cells A1 B1 C1) the headings, Surname, Forename, Year. Right now, I enter in cells A2 B2 and C2 say: Smith <Tab> John <Tab> 1555 <Enter, move mouse to the A column in the next row down). What I want to happen is when I have entered the last data in a row and pressed <Enter> I move automatically to the A-column in the next row down.

Is this possible?

Regards and a Merry Christmas to all

Wibs


I have a textbox in my userform where anything typed in the box is entered into cell A2 in my worksheet. However, multiple lines of text are not properly displayed in my worksheet. I have enabled MultiLine and EnterKeyBehaviour in the properties window of the textbox so I can type multiple lines in my textbox. The problem is that when I press the button to enter the text from my txtbox to cell A2, the cell doesn't actually display the text in separate lines. It just places a square symbol in the place that enter should have been pressed and the text should have been split into separate lines.

How can I get the separate lines of text in my textbox to be properly displayed in a cell? Thanks for your help in advance..


I've been using Excel for years and had very few issues. However, I recently went into a spreadsheet to update it and was unable to select and enter data into an individual cell. When I click on a cell and try to enter #s nothing happens (my num lock is on). Then when I try to click into another cell it just highlights that cell, along with any other that I move my cursor over. Once I click on one cell I can't stop the highlighting from happening. I can't even click on anything in the toolbar. I am extremely confused, can anyone help?


I would like the contents of a selected active cell to be displayed in a certain other cell, say R4. When another cell is selected and active, that cell's contents should be displayed.

I have an array of 9 columns and 20 rows with equity symbols and conditionally formatted to show the severity of price movement in either direction.

Instead of typing in the value of whatever cell a trader is looking at I would like for them to just be able to click on the cell and have that symbol copied into R4 so some detailed information can be displayed for them.

Can't find a thing about this on any forum or msdn.

Hope I'm explaining this at least somewhat clearly.

Thanks.


when I type a number or letter into a cell and then press enter the cursor
jumps way down the page to what appears to be a random cell. The one i
originaly typed in remains blank. spreadsheet was previously ok this has
just started to happen.

help please
thanks





Is there a way I can use conditional formatting or something to change the color of the cell once I enter a value or text into that cell? For example if I currently have the A2 cell color as a gray color, and I enter information into A2 can I have it set to automatically change to no fill or any other color without having to click out of the cell, back into it, and then clicking the button?? Does that make sense??? Can someone help me?


Is there a way that will run the code from a button when the enter key is pressed. Currently the enter key moves to the next text box in the user form.


I am trying to automatically capture and record the date of a cell's last change in value (date stamp). I have an item price list and if a particular cell gets updated I want to automatically record the date of change of that cell. I realize that after I change cell A1 I could tab to cell B1 and enter Ctrl+; but if I have a hundred new prices to enter I don't want to do that (plus me or the data entry person might forget).

For instance,

A B
1 $32.17 8/17/08
2 $43.20 9/12/09

If I go in and update cell A1 to $33.98 today I would like cell B1 to read 2/16/10. But I don't want cell B2 to change.


Thanks


Posted this on the Ozgrid forums, but haven't gotten any help yet, so I thought I'd try here too!

I've been having a strange problem lately. I have a fairly lengthy macro that works perfectly most of the time. Occasionally it will run as expected but as soon as the macro ends, excel becomes unresponsive to mouse-clicks. When I click anywhere (trying to select a cell, or an excel menu item...clicking anywhere in excel) I'll get the a 'ding' system sound and nothing will happen. BUT, if I use the keyboard arrow keys, I can see that the active cell selection moves accordingly. Then it gets really strange - when I have a cell highlighted and press any key to input text, it gets duplicated. So if I press "s' it will input "ss" into the cell, and then when I press enter it will auto-move to the next cell down, but nothing ends up getting saved into the previous cell.

I don't understand what's going on at all. I can't think of anything in my macro that would have these kinds of effects. I've made sure that screenupdating is turned back on at the end of every procedure. If I go into the VBE, I can manually run procedures and they all work fine. The only way I've been able to get back to normal is by force closing excel altogether and re-opening. Any ideas?

______________________

Still having trouble, and the same thing is happening with this workbook on two different computers, so I don't think it's a hardware, or OS specific issue. When it gets locked up like this, I can still do anything in the VBE (edits cells, run macros, etc.) with no problems. If I'm in the excel window, I can click alt on the keyboard and the shortcut keys for the menu come up, but I can't go deeper than that by clicking the letter shortcuts, they do nothing. If I use the delete key to delete the contents of a cell, then it gets deleted. But if I type anything else (numbers, letters, or symbols) then it types 2 instances of the key every time, yet when I hit enter, nothing changes in the cell. I also can't really bring focus to the excel window if something else (ie. the VBE) is on top of it, clicking into the excel window just gives the little system 'ding' sound and nothing happens.

If I hit the save button in the VBE (since I can't click anything in the excel window), then it seems to snap out of it and go back to normal. I tried searching for anything simmilar to this and can't find anything...

Any help would be much appreciated. This is driving me nuts!


Hi everyone, this is my first post here. I consider myself a more advanced Excel user and can navigate my way around fairly well. I've written a spreadsheet and am wondering if there is a way to permit data entry in a cell, contingent upon another cell being populated.

In simple terms, you can't enter data in cell X, until cell "Y" has been populated with something.

Can anyone help with this, because I can't figure it out....


I am a very advanced Excel user so this is a new one for me.

When I open any spreadsheet (new or already populated) the black box that normally frames the active cell is missing (showing which cell you have selected). Likewise when I 'select all' the sheet does not become shaded.

In addition:

Can not fill series
Can not change cell format (specifically to show Currency or Accounting w/$ symbol)

And I am sure there is much more that I have not found yet. I have not seen a single thread on this topic anywhere on the internet.

Help!


I've tried pressing shift+enter but I can't get it!



I have an excel worksheet that adds two other worksheets in a data
triangle. I copied it to create a new data set and used find &
replace to change the worksheet references to the new ones.

The cells still contain the result of the old formula referring to the
previous worksheets. The only way I can get the formula to return the
correct result is to edit (F2) each cell and press enter. Calc now
(F9) does nothing.

I've seen this before, but this time, I need to calculate many
thousands of cells and don't have time for this workaround.

Any ideas?

Thanks.

Don S



In excel, I am trying to find a formula or funtion so that when I enter a
date (1/10/05) in cell A1 for example, then B1 automatically changes to
1/11/05, C1 to 1/12/05, etc. Can anyone help? Thanks!!



Hey guys,

I'm trying to write a macro which prints to PDF and saves the file name as the contents of a cell. I've been looking through all the posts currently on this forum to get something working. I'm using the following code -

Sub PrintPDF()
Filename = "C:\Documents and Settings\samb\My Documents\" & ActiveSheet.Range("Z1").Value
SendKeys Filename & "{ENTER}", False
ActiveWindow.SelectedSheets.PrintOut Copies:=1, ActivePrinter:= _
"Adobe PDF:", Collate:=True
End Sub

The macro prints to PDF, but then it stops at the Save As stage, where I have to manually enter the name of the file and click Save. I want the macro to automatically name the file with the contents of cell Z1. I then want it to then automatically press enter. Any ideas where I'm going wrong? Any help would be much appreciated!


Hello all,

Until now I have been able to find all my answers through searches. As a VBA novice, it has been very helpful. I am stumped on this one, however. I am trying to autofill from the selected cell in Column C down. I would like it to stop at the last cell with data in Column B. This is the code I have so far:

Range("C2").Select
Selection.AutoFill Destination:=Range(Selection, Selection.End(xlDown))

This does the autofill, but doesn't stop at the last cell with data in Column B.

In the past I have use this code to acheive similar results:

Dim endRow As Long
endRow = Cells(Rows.Count, "B").End(xlUp).Row
Range("C2").AutoFill Destination:=Range("C2:C" & endRow)

The problem with this code is that I will not always be starting in "C2". I need code that uses whatever the selected cell is.

All help is appreciated. Thanks!


I have a formula in cell C1 (=A1/B1). I want to copy this formula down to row C20, however rows A2 to A20 are empty so C2 to C20 show (#DIVO!). Is there something I can put in the formula to make column C be blank until the data is enter into Columns A & B?


Ran into a problem I've never seen before. When dragging a cell across that contains a sum equation the result was the following cells with the same value. Inside the cell it showed what would be the correct new equation, but the value was still from the original cell. Any ideas on what's causing this?

If I double click the cell and then hit enter it will re-total the area and then give me the correct value, but I'd obviously rather is just work right the first time.


Hello,

I am new to using Excel and I am not very computer literate. I am looking for some help with a spreadsheet I am making. Here is the problem:

I have a column of 14 numbers in cells A1 to A14. If all of these values are less than 2%, I would like a "Pass" to display in cell B1. If any of these values are greater than 2% I would like a "Fail" to display in cell B1.

I have got a formula that works for a single cell but I can't figure out how to get it to apply to more than one cell. For example, I have entered =IF(A1<2,"Pass","Fail") in cell B1. Now if the value I enter in A1 is less than 2, it shows a "Pass", and if the value in A1 is greater than 2 it shows a "Fail" in cell B1. How can I get this to apply to all of the cells from A1 to A14?

If somebody could help me out that would be great.

Thanks,
Randy


I have entered a vlookup formula in a cell and it returns the correct value from the other worksheet. However when I copy the formula down it keeps returning the exact same value as the first cell. If I enter a formula in each individual cell it returns the correct value. Its driving me crazy ! I woyld be glad of any advice

Many Thanks

Karamazov


Hello everyone, I am new to this forum and have been using excel for about 3 years. I have learned alot but still can not figure out how to make numbers add up in one box like a running total. Meaning, If I have a list and in the list is one cell for each item say like cell a1 is for a can of coke and cell a2 is for a car tire and so on,and i want to keep a running total by adding a number to cell a1 or a2 like say "3 i.e. 3 tires or cans of coke" and later that day i come back and need to add 2 more ......so i want to be able to just click on the cell a1 or a2 and enter the number 2 and the cell would add the number in it to the number im adding to it to show a result of 5 tires or whatever. I am sorry If i am not asking the question in an understandable manor but its the best way I can think to ask it.lol anyways, any help would be appreciated, Thanks in advance.


James


From limited experience I know that excel calculates dates via serial numbers.

I have formulas to add a number of days to a cell containing an entered date and display the resulting new date (ie. 03/01/2011 (c34)+11 = 03/12/2011)

I am seeking to leave resulting formula cell blank until a date is entered in the input cell. Currently when the input cell is empty the formula cell obviously displays 1/11/1900 using the above example.

What conditional format would achieve leaving the formula cell blank until date data in entered into the source cell?

Hopefully a simpler question for your experience level than mine.


I have noticed that a handful of people at work enter a formula as =+A1+A2 instead of the way I would enter it =A1+A2

What is the origin of the extra plus sign at the beginning? To me it seems to be unproductive and is simply not needed. I have been using Excel for over 12 years and have never needed to enter any formulas like that. Does this originate back to a much older version of Excel where it was once needed?

Just curious.
Thanks.


Hi, this is something so simple that I have forgotten how to do it.
I want F3 to turn yellow if someone selects "Yes" from a drop down list in cell E3, then F3 has no fill once data is entered into it. And F3 turns Black if E3= no selected from the list. Or F3 turns red if E3 contains "TBC"

so in summary,

if E3="Yes", then F3 conditional format to Yellow until data is entered in it.
if E3="No", then F3 conditional format to Black
if E3="TBC", then E3 & F3 conditional format to Red until E3 is changed to
"Yes" or "No" at a later time.

Thanks in Advance for the help

Mutley13


Greetings all,

How do I link cells so that I can make data entries into either cell? I believe this is called 2 way cell linking.

In short, I want to have a cell on one tab linked to a cell on another tab and be able to change the value of both cells by entering data either tab.