Catastrophic Error Message

I'm having a problem in a workbook with several ActiveX command buttons. I had been using the form control buttons to run macros, but the boss wanted each button to have it's own, different color. So I removed the form control buttons and created new ActiveX command buttons. I got into the button properties and set the background colors. I added the _Click code to run the macros when the user clicked the buttons.

All of the buttons were working fine. Then I saved and closed the workbook and went to lunch. Now when I open the workbook, the buttons don't work! When I click them nothing happens. They appear frozen. They don't even seem to click. No error message. Nothing.

If I right-click the button in Design Mode and select Properties, I get sheet properties not the button properties. I can't seem to locate the command button properties any longer. I still see the button name "cmdButtonGetInfo" and "=EMBED("Forms.CommandButton.1","") in the name box and formula bar. The odd thing is if I create a new button it works fine until I save and close the file. When I reopen the file none of the buttons work.

It's like the buttons are being disabled when I close or open the file. Any suggestions?

Hello,

I'm pretty new at VBA and was wondering if you could help me out on this:

I have created a VBA userform but will need to have it used by at least 5 users. My question is, can it be done with all users working at the same time and when saving their work all data entered will go to one master excel sheet? if yes, would you be kind enough to share the code?
MS Access is not an option for me so I was wondering if you could help me do this in excel.

thank you so much and would really appreciate to hear from anyone soon.

Hi all,

I've had a long search through your pages to see if this question has been answered before but having browsed through about 50 pages worth of threads I couldn't see anything, but if I am repeating prior information I do apologise.

I've written a macro that is relatively simple. It just takes some information in one format, rearranges it, adds some formatting and performs some calculations. Nothing incredibly fancy but it works fine on my computer.

Now, I need to share this macro with some other people, so basically I've just sent that excel file on to the people that need to use it. Should be fine and in most cases it is, however there is one user who although they can open the file, can't seem to get the macro to run properly.

It seems to get a small way through the macro but then stop with no error messages or any sign that it hasn't completed properly.

I have checked Macro Security level and that is the same as mine, Tools - Add-Ins is the same, In Visual Basic, Tools - References is the same as mine. It is the same Operating system and the same version of Excel.

I have even signed into this person's computer as myself (it's a big company network thing) and tried to run the macro and it works fine, so there is nothing wrong with the hardware.

I've googled and searched and tried everything I can think of but I'm no closer to solving this problem, so if anyone has read through this wall of text and can come up with a possible solution, that would be greatly appreciated to save me from tearing ALL my hair out!

Thanks very much for your time.

I have an excel form, I want my users to be able to open the form, fill in appropriate data, then click the save button. When the button is clicked, the data in the form should be saved to a new file and then the original form should be reset (clear all values) for a new set of data entry. When the data is saved, I want the new excel sheet to be saved to a location specified within the macro so the user doesn't have any options and I want the title of the new file to be the value of one of the cells.

I'm new to macros and would appreciate any help this board can offer. Thanks...

How can i solve a debugger error that states "run-time error '9'...Subscript out of range.

for a search box code provided by Joe Was

Hello,

As the title goes this is as simple as it gets. The macro worked good when I was using excel 2003 but now that I have 2007 everything works for except the resizing (Picture.Width & Picture. Height).

Code:

Sub AddImage()
Dim strPath As String
Dim strFile As String
Dim Picture As Object
Dim Response As String
Dim C As Range
strPath = "C:\\Photos\"
 
For Each C In Range("A1", Range("A65536").End(xlUp))
    If C  0 Then
        With C.Offset(0, 1)
            Set Picture = Nothing
            On Error Resume Next
            Set Picture = Sheets("Raw Pix").Pictures.Insert(strPath & C.Value & ".jpg")
            Picture.Top = .Top
            Picture.Left = .Left
            Picture.LockAspectRatio = msoTrue
            Picture.Width = 157
            Picture.Height = 138

        
    End With
    End If
     
NextC:
Next C
End Sub

I have tried to record some macros while I am resizing the pictures but to no avail the macros are blank.

Please help

Thanks!

Hi all,

I've been getting this error on occasion recently.

- It's a shared document
- There is usually 10-12 people using the file at the same time

I've read on the Microsoft Help site that the issue is that somebody is accessing the file while another is trying to open it.

Is there a way, perhaps through VBA, that I can not allow a user to save while somebody else is opening the document? Other suggestions on how to avoid this error?

Thanks!

Posted this on the Ozgrid forums, but haven't gotten any help yet, so I thought I'd try here too!

I've been having a strange problem lately. I have a fairly lengthy macro that works perfectly most of the time. Occasionally it will run as expected but as soon as the macro ends, excel becomes unresponsive to mouse-clicks. When I click anywhere (trying to select a cell, or an excel menu item...clicking anywhere in excel) I'll get the a 'ding' system sound and nothing will happen. BUT, if I use the keyboard arrow keys, I can see that the active cell selection moves accordingly. Then it gets really strange - when I have a cell highlighted and press any key to input text, it gets duplicated. So if I press "s' it will input "ss" into the cell, and then when I press enter it will auto-move to the next cell down, but nothing ends up getting saved into the previous cell.

I don't understand what's going on at all. I can't think of anything in my macro that would have these kinds of effects. I've made sure that screenupdating is turned back on at the end of every procedure. If I go into the VBE, I can manually run procedures and they all work fine. The only way I've been able to get back to normal is by force closing excel altogether and re-opening. Any ideas?

______________________

Still having trouble, and the same thing is happening with this workbook on two different computers, so I don't think it's a hardware, or OS specific issue. When it gets locked up like this, I can still do anything in the VBE (edits cells, run macros, etc.) with no problems. If I'm in the excel window, I can click alt on the keyboard and the shortcut keys for the menu come up, but I can't go deeper than that by clicking the letter shortcuts, they do nothing. If I use the delete key to delete the contents of a cell, then it gets deleted. But if I type anything else (numbers, letters, or symbols) then it types 2 instances of the key every time, yet when I hit enter, nothing changes in the cell. I also can't really bring focus to the excel window if something else (ie. the VBE) is on top of it, clicking into the excel window just gives the little system 'ding' sound and nothing happens.

If I hit the save button in the VBE (since I can't click anything in the excel window), then it seems to snap out of it and go back to normal. I tried searching for anything simmilar to this and can't find anything...

Any help would be much appreciated. This is driving me nuts!

I am using XL2007 and have a macro that refreshes microsoft query connections. The issue is the refreshes only happen if you step through the macro using the debugger. When you run the macro normally, everything else functions properly, but the data is not refreshed.

Any help is appreciated. Here is an excerpt of the code:


Workbooks.Open Filename:="C:\Profile.xls"
Sheets("SELECTION").Select
Range("F3").Value = SNR

' THIS PART ONLY WORKS IF YOU STEP THROUGH THE MACRO USING THE DEBUGGER...IF YOU RUN MACRO NORMALLY THE CONNECTIONS DO NOT REFRESH
ActiveWorkbook.Connections("Connection").Refresh
ActiveWorkbook.Connections("Connection14").Refresh
ActiveWorkbook.Connections("Query from C_Profile").Refresh
ActiveWorkbook.Connections("Query from C_Profile1").Refresh

I have a template that automatically populates the date field with the
current date when opened, using today(). Users then Save As to have an
archive copy of their spreadsheet. However, when they go back to access
their saved sheet, the date changes from the created date to the current
date. How do I stop this in Excel?

I know that Word lets you do this by changing the code from {DATE} to
{CREATEDATE}, but I can't find a similar setting in Excel.

Please help and thank you!

I have a textbox in my userform where anything typed in the box is entered into cell A2 in my worksheet. However, multiple lines of text are not properly displayed in my worksheet. I have enabled MultiLine and EnterKeyBehaviour in the properties window of the textbox so I can type multiple lines in my textbox. The problem is that when I press the button to enter the text from my txtbox to cell A2, the cell doesn't actually display the text in separate lines. It just places a square symbol in the place that enter should have been pressed and the text should have been split into separate lines.

How can I get the separate lines of text in my textbox to be properly displayed in a cell? Thanks for your help in advance..

Is there an on error exit sub command. I would like my Macro to just stop running if there is an error instead of an error message popping up. Thanks in advance

I often use if statements to return empty cells, for example:

=IF(a1=0,"ERROR","")

The trailing "" returns an empty cell. The problem is, it is not TRULY empty. If I fill that formula down, I cannot, for example, jump from one "ERROR" cell to the next by hitting Ctrl arrow-down because it seems to think that these empty cells have contents.

Is there a way to designate, in such a formula as above, to return a TRULY empty cell?

Thanks

Is it possible to share a workbook with macros and have the macros work properly. I have one spreadsheet that needs to be shared by many users. We want to all be in the same document at the same time saving changes. The real catch is that the workbook has macros. I used the 'Share Workbook' function under tools. At the end of the setup, it told me that the macros would not work properly. The odd thing is that everytime I try to click on one of the macros I get an error, but yet the macro still performs the function. So essentially the macro works, it is just a pain because you have to click 'end' everytime on the error screen. Any suggestions?

Alanda

I know this question has been asked a bajillion times, so I apologize for the redundancy.

I am working with an Excel spreadsheet and saving it as a .csv file in order to upload to an application that parses out the .csv data as transactions. The system requires .csv files, so this is how I need to save my doc (with this extension). I have been successful at preventing Excel from coverting that long number into scientific format. I have saved as a TXT file, pasted the longer number and it displays correctly. That is all good. But I have to save as a .csv. So if I do that, close the Excel window, and then open again (as the .csv file), the numbers are back to being displayed in scientific format. I have tried creating an Excel doc from scratch and entering text in Text format, to see if this created a cleaner file. But again, the second I save as .csv, close the window and then open that file up again, that dang scientific format is back.

Does anyone have any idea of how to work around this? Once I have successfully gotten the numbers to display as the long-chain number, how can I get them to "stick" so that they don't revert back to scientific format when I reopen the file?

Thanks so much for your help!