Code To Require Password To Unhide Rows On Already Password Protected Sheet

I'm trying to use VBA to go to a website that requires a User Name, Password, and a Submit Button.

So far I can get everything to work besides the Submit part. The code runs without errors, but doesn't actually "hit" the submit button on the webpage.

For posting, I removed my actual user name and password and and used the generic " User Name " and " Password " highlighted in blue.

I highlighted another section in green that I took from a previous post hoping it would solve my problem. The link is: http://www.mrexcel.com/forum/showthr...xplorer+submit


Here is the code I am using:

Sub GoToWebSiteAndPlayAroundNew()

Dim appIE As Object ' InternetExplorer.Application
Dim URL As String


Set appIE = CreateObject("InternetExplorer.Application")
URL = " https://efolio.morgankeegan.com/escripts/defaultLogon.asp?errCode=2 "


With appIE
.navigate URL
.Visible = True

Do While .busy: DoEvents: Loop
Do While .ReadyState 4: DoEvents: Loop

.document.getelementbyid("fUserName").Value = " UserName "
.document.getelementbyid("fPassword").Value = " Password "

End With


On Error Resume Next
x = 0
For Each mitem In IE.document.all
mitem.Value = "x"
x = x + 1
Next

x = 0
For Each mitem In IE.document.all
If x = "Submit" Then
mitem.Click
Exit For
End If

Next

End Sub

Corporate edict.

I have a worksheet that is locked and protected now, except for cells in a certain collumn. I have named the cells in that column "MS96A".

If a user enters a date in a cell or range of cells anywhere in the column, the changed cells also need to be locked and protected (Once they enter a date, it is not allowed EVER to be changed again. Corporate requirement! *Shrug*).

What I am looking for is this. If the user selects that cell again, they will get the usual pop-up message, "The cell or chart that you are trying to change is protected..."

I think I am close, but I am getting an "End If without block If" error on the If Clause.


Sub Worksheet_Change(ByVal Target As Excel.Range)
Dim MRange As Range
Set MRange = Range("MS96A")
' If Not Intersect(Target, MRange) Is Nothing Then For Each cell In MRange Sheets("Sheet1").Unprotect Password:="temp"
cell.Interior.ColorIndex = 3
cell.Font.Color = vbBlack
Selection.Locked = True
Selection.FormulaHidden = False
Next cell
ActiveSheet.Protect Password:="temp", _
DrawingObjects:=False, _
Contents:=True, _
Scenarios:=False
ActiveSheet.EnableSelection = xlUnlockedCells
End Sub

I have found similar posts on the forum, but nothing without use of a userform.

I have the following code:

Code:

 
Sub Development()
    Pass = InputBox("Please enter development password", "Password")
    If Pass = "XYZ" Then
        UnhideAll
    Else: MsgBox ("Password incorrect, please try again")
    End If
End Sub

This works, but I want to hide the text as it is entered.
Is there a way I can enter this as a property? i.e. inputbox.text.property = ... or something?? I've tried what seems intuitive, but nothing works.

Help!

Is there a way to lets say go to www.gmail.com and automatically have VBA fill in the user name and password ? I am trying to automate login for my co workers to a certain site. Just havent been able to find out how. PLZ HELP !!

Hi. I have a row in a spreadsheet in Excel that is hidden but i am unable to unhide it. I have tried the usual way by hovering between the rows above and below until i get the double line but this does not happen. I have also tried going through the Format - Row - Unhide option but this also doesn't work. Any suggestions?

I have an Excel workbook that was created by a former coworker. It includes a macro that, among other things, displays a message box about the 2008 file. The macro runs as soon as the file is opened. I'd like to access that macro to correct the date to 2011 and see what else, if anything, it's doing for me (it doesn't appear to do much). I can find references to creating macros to hide and unhide rows/columns and I found ways to delete all macros in a workbook, but I cannot find anything about unhiding a macro without knowing its name.

Does anyone know of a way to unhide this macro?

Thanks!

Hello,

i've got the following problem:

I want users to double-click on a row on a protected sheet and then do some code based on the row-number of the clicked cell. I've protected the sheet because it contains a lot of formula's.

When a user double-clicks a row it triggers the code through the Workbook_SheetBeforeDoubleClick event.
After the code is executed Excel shows a message that the cell that was clicked was protected etc etc.

How can I prevent this message from popping up?

I've already tried
Code:

application.displaywarnings = false

but that didn't work

Thanks

Thnx for your help man. Now I have another situation.

I have the following:

1. Login form containing username and password fields.
2. Data entry form

I want to do the following:

1. Coding for username and password fields, which, If the login is successful, takes me to DATA Entry Form, Otherwise shows message "Invalid Login".

Thanks in anticipation.

I have a Workbook with 2 sheets, the first one is the data entry and the second one contains all the calculations and confidential info.
I have one staff member that does the data entry but I don't want them to see the 2nd sheet. I know I can hide the sheet then protect the entire workbook which does work, but is there an easier way so that the second person doesn't have to keep hiding/unhiding the 2nd sheet?
It would be perfect if when you tried to click on Sheet2, it asked for a password.
Cheers
Jase

Hi Excel experts,
I am working on a worksheet, and would like to have an entire row transferred to another worksheet based upon a certain cell's value.

Having searched through the many solved threads on this site, I attempted to customize some of the code to my worksheet. Not being proficient in Macro/VBA, I failed. I figured I would ask for help, and see if anyone can provide what I am looking for.

Basically, I am attempting to construct a "work in process" file, and would like all completed work to be deleted from the work in process sheet, and transferred to a sheet that contains a running list of all work completed.

Attached is an example of what I am working on. I would like Column Q (Status) to determine if a row can be moved to a sheet that contains the list of all work completed, and eliminated from the original sheet. Once Status is updated to "Complete", it would be helpful to be able to run a macro/click a button that would perform the transfer.

Can anyone assist?

Thanks!

I have protected a worksheet as it has several formulae on that I do not wat anyone else to mistakingly delete. I then have spent time on setting up a sheet to track changes (just in case this has any bearing on the problem). This is the only thing that I think I have changed since protecting this morning and now I cannot unprotect the sheet. I have not protected the workbook and the unprotect sheet function is now greyed out.

Any ideas?

Hey there,

I have been tasked with introducing userforms into an excel sheet and tbh I'm quite amazed that excel has this capability of adding userforms to excel sheets.

Anyway, I have 2 columns of data in an excel sheet and I wish to add this to a userform so that the userform displays the 2 columns beside each other with headings, like a table. The user should then be able to select a particular row and insert it into the specified cell.

I would also like the user to select a row on the table and then be able to bring up another table depending on the row selected...basically so that the user can draw deeper into the information that they require.

I have an example excel sheet where I have 2 sheets. One sheet is the user entry sheet called User Entry Screen. the next sheet is the tables sheet where my tables are held. Once the user selects the cell shown in the example sheet, it should then bring up the user form. the user then, depending on which item clicked, then gets shown the next window with a table and info on it. then user should then be able to select an item and the cells on the user entry screen would then get populated.

Personally I think this is a really tricky challenge and any help with doing this would be extremely appreciated.

I'll post up further comments as I am trying to work my way through it!

Thanks,

Jag

Hi-

I am brand new to Mr. Excel and would love some advice.

I searched the boards pretty extensively but could not find what I am looking for...I apologize if this is a duplicate.

I am using Excel 2007

How do you automatically add rows and update values for cells to a linked worksheet in which rows have been added? For example: Sheet 1, columns A & B are linked to Sheet 2, columns A & B. Sheet 2 has values in A1:A5 & B1:B5 and Sheet 1, since it is linked, has the same info. I want to add a row in between 3 & 4 on Sheet 2 and want Sheet 1 to automatically add the same row and update the value of the cell in column A & B.

Any help is greatly appreciated!

John

Hi all.

I have set up a workbook that is sent out to lots of different users. They each keep and use their own copy.

I have set it up so that everything looks OK and is visible on MY screen, but I'm conscious that some users may have different screen sizes, different toolbars set up, and so on, which might make some parts not immediately visible to them.

I have set up an auto-execute macro which automatically sets the zoom factor to best fit, for several of the worksheets, and this works fine.
Here's the code that does it.
Code:

Sheets("WELCOME").Select
    Range("A1:N18").Select
    ActiveWindow.Zoom = True

By repeating this code for each worksheet, I can make each one be zoomed just right.

However, the file contains 8 sheets that are all identically laid out, except the number of rows is different.
What I want to do is go to the worksheet that has the largest number of rows (it's always the same worksheet, so I know which one it is), set the zoom factor for THAT worksheet (which I can do, and it always has the same number of rows), and then take THAT zoom factor, whatever it is - and it will vary depending on the user - and apply that to the other worksheets that have a similar layout.

I could just go through each worksheet and zoom it automatically, but that would mean that some of the sheets looked very large, others very small, and I'd like them to have a consistent appearance.
I could also specify a range on each worksheet that was similar to the appropriate range on the longest worksheet, and zoom that automatically, but that's not ideal either, because some of the row heights vary from sheet to sheet, and again I'll end up with different font sizes.

Anyone know how to do this ?

Hello,

Is there a way to create a second worksheet that is based on data from an original sheet that will automatically update when you ADD ROWS to the original sheet?

Linking values between sheets is easy... but I need to be able to set a designated area on my A sheet that I can add rows into which will automatically be added to my B sheet.

Does anyone know of a function that I can apply for this?