Excel VBA Course
Excel VBA Course - From Beginner to Expert

200+ Video Lessons
50+ Hours of Video
200+ Excel Guides

Become a master of VBA and Macros in Excel and learn how to automate all of your tasks in Excel with this online course. (No VBA experience required.)

View Course

(80% Discount Ends Soon!)

Close Window (X)   
Excel VBA Course
[80% Discount] Excel VBA Course - From Beginner to Expert

200+ Video Lessons
50+ Hours of Video
200+ Excel Guides

Become a master of VBA and Macros in Excel and learn how to automate all of your tasks in Excel with this online course. (No VBA experience required.)

View Course

(80% Discount Ends Today!)

Pause Macro Or Keep From Running Until User Input

I have a workbook with a couple of straightforward macros activated on buttons on a couple of different sheets.
Thanks to the penultimate knowledge on this board, I have been able to figure out how to store data and use this to create an "Undo" macro (sort of) that resets everything back to it's original condition. My question is:
If a user hits the "Reset" button, it will reset all their data back to the original. I want to want the usr with a popup message, and give hem the option of hitting "OK" or "Cancel". I can create a simple MsgBox popup, and I know how to create a UserForm, but I'm lost with:
A: Pausing the macro from running the rest of the script until after the user has hit OK. And/Or:
B: Having a User Form Popup to give the user the option of hitting Cancel to stop the macro from running without an error message, and just continuing with entering data into the spreadsheets normally.
Am I better off with a MsgBox or a UserForm, and how do I accomplish the OK or Cancel options and pause my script until input?
Thank you in advance for your help (Once again).


Excel VBA Course
Excel VBA Course - From Beginner to Expert

200+ Video Lessons 50+ Hours of Instruction 200+ Excel Guides

Become a master of VBA and Macros in Excel and learn how to automate all of your tasks in Excel with this online course. (No VBA experience required.)

(80% Discount Ends Soon!)

View Course




Similar Topics







I have an excel form, I want my users to be able to open the form, fill in appropriate data, then click the save button. When the button is clicked, the data in the form should be saved to a new file and then the original form should be reset (clear all values) for a new set of data entry. When the data is saved, I want the new excel sheet to be saved to a location specified within the macro so the user doesn't have any options and I want the title of the new file to be the value of one of the cells.

I'm new to macros and would appreciate any help this board can offer. Thanks...


I have a UserForm with several fields on it: 5 are 'required' and the other 6 are 'optional'. If a user doesn't enter a value for ALL of the 5 'required' fields, how do I get the code to return the user to the UserForm (with, I assume, the values they already entered, still showing)?

I have the AutoOpen code that starts things off, and then, in turn, loads the UserForm with the fields that need to be populated.

I can't figure out how to route the user back to the UserForm, to enter the 'missed' data.


Hi All,

I've been struggling with this for a while now and can't believe how hard it is!. I've searched on this site and on others to get some clarification but to no avail.

It's pretty simple really. I have a user form which contains a tex box for a user to input the date I want the format to be dd/mm/yyyy but can't find out how to set the format of the text box to this.

Please can someone give me a bit of guidence or link me to a good rescource if missed it in the search.

Thanks in advance.

G


I'm having a problem in a workbook with several ActiveX command buttons. I had been using the form control buttons to run macros, but the boss wanted each button to have it's own, different color. So I removed the form control buttons and created new ActiveX command buttons. I got into the button properties and set the background colors. I added the _Click code to run the macros when the user clicked the buttons.

All of the buttons were working fine. Then I saved and closed the workbook and went to lunch. Now when I open the workbook, the buttons don't work! When I click them nothing happens. They appear frozen. They don't even seem to click. No error message. Nothing.

If I right-click the button in Design Mode and select Properties, I get sheet properties not the button properties. I can't seem to locate the command button properties any longer. I still see the button name "cmdButtonGetInfo" and "=EMBED("Forms.CommandButton.1","") in the name box and formula bar. The odd thing is if I create a new button it works fine until I save and close the file. When I reopen the file none of the buttons work.

It's like the buttons are being disabled when I close or open the file. Any suggestions?


Hey there,

I have been tasked with introducing userforms into an excel sheet and tbh I'm quite amazed that excel has this capability of adding userforms to excel sheets.

Anyway, I have 2 columns of data in an excel sheet and I wish to add this to a userform so that the userform displays the 2 columns beside each other with headings, like a table. The user should then be able to select a particular row and insert it into the specified cell.

I would also like the user to select a row on the table and then be able to bring up another table depending on the row selected...basically so that the user can draw deeper into the information that they require.

I have an example excel sheet where I have 2 sheets. One sheet is the user entry sheet called User Entry Screen. the next sheet is the tables sheet where my tables are held. Once the user selects the cell shown in the example sheet, it should then bring up the user form. the user then, depending on which item clicked, then gets shown the next window with a table and info on it. then user should then be able to select an item and the cells on the user entry screen would then get populated.

Personally I think this is a really tricky challenge and any help with doing this would be extremely appreciated.

I'll post up further comments as I am trying to work my way through it!

Thanks,

Jag


Good mornng - I am new to the forum - my name is Jena

My question is this - I have a large spreadsheet with multiple columns of information. I want to sort it by a certain column. I know how to do this. My question is, once I'm done with my work I want to sort it back to the original "sort" but I'm not sure how they have it sorted. I've tried to figure out how they have it sorted but can't. Is there some way to go back to the original sort?

Thank you for your anticipated help.

Jena

I have a VBMacro Excel file loaded on a Server that numerous people access. A Macro in this file creates a Copy of a specific Sheet within the Active Workbook and I want to Save it to the individual's Desktop.

How do I find out what the current User's desktop folder path is each time the Marco is run by a different User?

Example User's path: 'C:\Documents and Settings\jfarc\Desktop'

Where 'jfarc' is the name of the current User which, will of course change with every different User that runs the Macro.

Also, is there a way to pull out of Excel what is the current User's 'Options | General | Default File Location' entry? Which may differ from the above directory.

I am familiar with and use the following coding for Opening/Saving files to the current directory of the opened workbook, but it only gives the path of the existing Excel workbook and not the current User's Directory Path:

Dim wbThis As Workbook
Set wbThis = ThisWorkbook
ChDir wbThis.Path


Hello everyone!!!!

Here is my situation. I have been trying to learn macros but have not made one yet. Need your help. Here at work, I have some incompentant computer workers who claim they KNOW MS sooo well and have certificates etc... *COUGH COUGH* ya ok... LMAO

We have a "shared" work book we all work in. It's nothing fancy, just use it as a PO Book but since it is shared some people continue to not save before they add in more work so that they see a "refreshed" copy of the workbook before they start writing in cells that already contain information.

How to I create a macro button at the top of the page that is literally a SAVE button.. instead of them saving by going to File - Save or cntrl+s ??? I just thought that MAYBE having a big button in their face will remind them.

Secondly as back up I was wondering if you can create a macro to do a refresh of everyones screens automatically - say every 2 or 5 mins??? I don't mean a save... but a refresh so the screen actually updates in front of you. (although I will keep this little piece of magic out of their knowledge so they don't rely on it, just though it would be a secondary back up to helping eliminate these mishaps cause we are loosing alot of information by people saving overtop of other peoples work and not caring.)

Thanks so much!!!!! Muchly appriciated.


Is there an on error exit sub command. I would like my Macro to just stop running if there is an error instead of an error message popping up. Thanks in advance


Hi,
I need the necessity do delete a sequence of sheets in my workbook.
If I use this code:

With ActiveWorkbook
If .Worksheets.Count >= 5 Then
For n = 5 To .Worksheets.Count
Worksheets(n).Delete
Next n
End If
End With

I receive a confirmation message box with this message:

"Data may exist in the sheet(s) selected for deletion. To permanently delete the data, press Delete" [DELETE] [CANCEL]

I wish to delete all sheets without receiving any message.

Is it possible?

Many thanks in advance for your kind support.

Regards,

Giovanni


Also, I cannot move the Pivot Table from the new Worksheet it is created in, to my existing Worksheet.

I am running Excel 2011 for Mac.

I have a Worksheet with a small amount of data, and when I click the Pivot Table button it automatically creates the Pivot Table in a new Worksheet. The Pivot Table data is fine, but I want it to display alongside the source data.
I've tried using the Move Pivot Table option and choosing to Create Pivot Table in Existing Worksheet and choosing a source cell alongside my current data, but nothing appears. Also, I checked in Edit menu and found that the Pivot Table appears to have not even been created/moved because there is no option to undo it.

Appreciate any help, let me know if you have any further questions.

Hunter


I am using the code below to disable the save function very successafully. However, is there a work around to allow a macro to save?
----------------------------------------------------------------------
Private Sub Workbook_BeforeSave(ByVal SaveAsUI As Boolean, Cancel As Boolean)

'this disables the save function on the XLS

MsgBox "****Save is Disabled****"
' Following line will prevent all saving
Cancel = True
' Following line will prevent the Save As Dialog box from showing
If SaveAsUI Then SaveAsUI = False
End Sub


Does anyone know how to automatically go back to the cell I was working on (meaning, the cell I last worked on) before I run a macro?

thanks


Helllo,

I have written a macro and at the end it displays a message "The macro has finished".

I would like this message box to disappear after 2 seconds automatically so that users don't have to press the OK button all the time.

can this happen ?

thanks
andy


I have never really used VBA and so am completely stuck at this problem. I need to create a macro which auto-populates a master worksheet from the individual user sheets in a shared workbook.

Sheet 1 is the master sheet "Team Stats". There will be an undetermined number of individual worksheets to accomodate new staff.

Each worksheet will be identical, using columns A-I with row 1 having the headings:

Date, Name, Reference, Value, Price, Age, Purchased?, Destination, Add. Products (the last 3 columns will have a drop-down list which will be used to enter data into the cell).

There will be a varying number of rows in each of the individual sheets.

If possible I would like the macro to run every time data is entered into one of the individual worksheets. If this is not then it would be fien to update every time the workbook is opened.

If anyone can help it would really cut down the time I spend collating these stats every day!


I have looked over the forums for information on how to do this, and can not find anything. I have used conditional formatting to identify duplicates in my spreadsheet. I have a unique user ID, which combines the first and last name fields into one. However, in 10,000 there are a number of John Smiths, Joe Adams, etc. With smaller lists, we search manually, and then add a 1, 2, 3, etc to each duplicate to create a unique value for the User ID.

My question is:

Is there a way to check for duplicates, and then automatically add numbers to the duplicate values to make them unique? If so, how can this be done?

So that you will have this:

JohnSmith
JohnSmith2
JohnSmith3
JaneDoe
JaneDoe2
JohnAdams
JohnAdams2
JohnAdams3
JohnAdams4

I think I have done a good job in illustrating what I would like to be able to do, but if there is still something that is unclear, I will post whatever clarification is needed.

Thank you in advance for your help!!


I have a simple address book spreadsheet. I would like to create a Search
form, where the user can enter the Last Name of the person they are searching
for.





I have an Excel workbook that was created by a former coworker. It includes a macro that, among other things, displays a message box about the 2008 file. The macro runs as soon as the file is opened. I'd like to access that macro to correct the date to 2011 and see what else, if anything, it's doing for me (it doesn't appear to do much). I can find references to creating macros to hide and unhide rows/columns and I found ways to delete all macros in a workbook, but I cannot find anything about unhiding a macro without knowing its name.

Does anyone know of a way to unhide this macro?

Thanks!


I added a print button to my userform

Code:

Private Sub btn1_Click()
UserForm1.PrintForm
End Sub


This prints out the userform as I would like, however it autoprints to the default printer and doesn't allow any printing options so I can't select to "print to one page". So as of now it is only printing out half my form and cutting off the rest.

Any suggestions?


Hi there, longtime user firsttime poster. Looking for some help as I am a non-expert with macros. Here's what I'm trying to do:

We have to submit things to a certain regulatory body and we usually enter tasks in as soon as they come, do the submission, and then keep a record of that submission.

So, I have a workbook with two sheets, one is "TO DO", the other is "ARCHIVE". Both sheets have the same columns and everything. I am looking for a macro that will automatically cut a (row) from the TO DO sheet and paste it in into the ARCHIVE sheet once it is done, then delete the cut row from the TO DO list so it stays topped up.

The trigger for archiving is the columns M and N which are titled "Complete ?" and each has a validation drop down that says "YES". When both cells in columns M and N have the YES in them, I would like the macro to make the above mentioned actions.

I ran a search on the forums and found something similar, but not quite what I was looking for.

Any help?