Vba -- How To Get Code To Pause In Place Until A Condition Is Met |
Vba -- How To Get Code To Pause In Place Until A Condition Is Met - Excel |
|
I was wondering does anybody know of a way to get code to pause in place until a condition is met? Specifically, I want my code to bring up a modeless userform, but I want the code to pause at that spot in the procedure until the userform is unloaded (which is what seems to happen when I bring up a modal userform).
I've tried looking at using a boolean variable in order to control whether the code after the modeless userform is displayed gets executed. But, the code keeps running and just seems to skip over the parts where it does not have permission to execute. Since I have the code within a for-next loop, I don't want the code looping a bunch of times either
The general structure of my code is as follows:
For i = 1 to 52
If a < b then
userform.show vbModeless
--> Here is where I want to pause until the userform is unloaded
Similar Topics
This is a very basic question, but i have been struggling for hours, so I must ask.
I I trying to simply fill a combobox on a userform from a named range on a sheet, I want to populate the combobox as soon as the userform starts. (I launch the userform from a button on the sheet) Where must I place the code? and will this code work?
Code:
Sub Button1_Click() Set UserForm1.combobox1.List = Sheets("Sheet1").Range("MyRange") UserForm1.Show End Sub
I am very new to vba, so please excuse my ignorance,
any help would be greatly appreciated
regards
jim
I have the AutoOpen code that starts things off, and then, in turn, loads the UserForm with the fields that need to be populated.
I can't figure out how to route the user back to the UserForm, to enter the 'missed' data.
Could you be so kind as to provide some code that will enable me to display a text box on a userform rounded up to 1 decimal place.
Where am I going wrong....
it calculates the number entered in textbox1 and divides it by a value that changes in cell O26 but the answer is in about 8 or more decimel places.
Only need like 65.3 as an answer not 65.277756942
This is the code ive used.
Private Sub CommandButton1_Click()
TextBox2.Value = Val(TextBox1.Value) / Range("O26").Value
End Sub
Code:
Private Sub btn1_Click() UserForm1.PrintForm End Sub
This prints out the userform as I would like, however it autoprints to the default printer and doesn't allow any printing options so I can't select to "print to one page". So as of now it is only printing out half my form and cutting off the rest.
Any suggestions?
I'm pretty new at VBA and was wondering if you could help me out on this:
I have created a VBA userform but will need to have it used by at least 5 users. My question is, can it be done with all users working at the same time and when saving their work all data entered will go to one master excel sheet? if yes, would you be kind enough to share the code?
MS Access is not an option for me so I was wondering if you could help me do this in excel.
thank you so much and would really appreciate to hear from anyone soon.
I have the following code to put data from a VBA userform into Excel
Dim Sh As Worksheet
Dim Rng As Range
Set Sh = ActiveSheet
Set Rng = Sh.Range("A65536").End(xlUp).Offset(1, 0)
With Rng
.Cells(1, 1) = Surname.Text
.Cells(1, 2) = forename.Text
.Cells(1, 3) = datein.Text
.Cells(1, 4) = origin.Text
.Cells(1, 5) = Addressee.Value
.Cells(1, 6) = usual.Value
.Cells(1, 7) = dateto.Text
.Cells(1, 8) = permission.Value
.Cells(1, 9) = dateseen.Text
.Cells(1, 10) = requestview.Value
.Cells(1, 11) = Invoice.Value
.Cells(1, 12) = notes.Text
.Cells(1, 13) = datecompleted.Text
.Cells(1, 14) = holdsend.Value
.Cells(1, 15) = fee.Text
.Cells(1, 16) = notes2.Text
.Cells(1, 17) = dateseen.Text
.Cells(1, 18) = invoicesent.Text
.Cells(1, 19) = Paid.Text
.Cells(1, 20) = Complete.Value
End With
What I want to do next is click on the surname on the speadsheet and call up the userform with the fields complete for that person. I would also like to be able to edit/update the form and update the information on the speadsheet accordingly.
Any help would be greatly appreciated!
Many thanks!
I have been tasked with introducing userforms into an excel sheet and tbh I'm quite amazed that excel has this capability of adding userforms to excel sheets.
Anyway, I have 2 columns of data in an excel sheet and I wish to add this to a userform so that the userform displays the 2 columns beside each other with headings, like a table. The user should then be able to select a particular row and insert it into the specified cell.
I would also like the user to select a row on the table and then be able to bring up another table depending on the row selected...basically so that the user can draw deeper into the information that they require.
I have an example excel sheet where I have 2 sheets. One sheet is the user entry sheet called User Entry Screen. the next sheet is the tables sheet where my tables are held. Once the user selects the cell shown in the example sheet, it should then bring up the user form. the user then, depending on which item clicked, then gets shown the next window with a table and info on it. then user should then be able to select an item and the cells on the user entry screen would then get populated.
Personally I think this is a really tricky challenge and any help with doing this would be extremely appreciated.
I'll post up further comments as I am trying to work my way through it!
Thanks,
Jag
Select Cell A1 if value is 100 delete entire row, else skip to next row. Then loop through each row in the spreadsheet till all rows with selected cell equal to 100 are deleted.
Thanks
I have the following code:
Code:
Sub Development() Pass = InputBox("Please enter development password", "Password") If Pass = "XYZ" Then UnhideAll Else: MsgBox ("Password incorrect, please try again") End If End Sub
This works, but I want to hide the text as it is entered.
Is there a way I can enter this as a property? i.e. inputbox.text.property = ... or something?? I've tried what seems intuitive, but nothing works.
Help!
When a user clicks on a line in the listbox I want to automatically copy the text in the 3rd column of the selected line to the textbox.
If anyone could provide code which would allow me to do this I would be grateful
Thanks
Colin
I got the below macro which uses IE and open the URLs. I want to create a userform with listbox with radio button and commandbutton on the same which will help me to connect to each url when I select the same in listbox and click on the commandbutton.
Code:
Sub DoBrowse1() Dim ie As Object Set ie = CreateObject("Internetexplorer.Application") ie.Visible = True ie.Navigate "www.google.com" End Sub
Any suggestions..
I have a piece of code called ConvertDates that formats data contained on 6 worksheets. The 6 data sheets all contain a data connection to a website of foreign exchange tables.
What I want is for my code to execute as soon as the data connection refresh has finished.
When I use the statement
Code:
ActiveWorkbook.RefreshAll Application.Run "Project1.xlsm!ConvertDates"
The code executes the macro whilst the refresh is still happening, thereby screwing up my results. I don't really want to use a timed wait, because the refresh speed is going to vary from user to user.
Is there some way I can tell excel to wait till the refresh has finished and then execute the code?
Any help would be hugely appreciated.
How can I get the separate lines of text in my textbox to be properly displayed in a cell? Thanks for your help in advance..
The problem is I can use code such as
strHTMLText = ie.Document.body.innerText
or
strHTMLText = ie.Document.body.outerText
to retrieve the code, but in either case only part, not all, of the source code is captured. I need ALL the code. Is there some kind of code such as ie.Document.body.allText or similar that would perform this function?
Much obliged!
I have the following:
1. Login form containing username and password fields.
2. Data entry form
I want to do the following:
1. Coding for username and password fields, which, If the login is successful, takes me to DATA Entry Form, Otherwise shows message "Invalid Login".
Thanks in anticipation.
My problem was that a userform defined with Excel at work (containing DT pickers) gave the message in the title when opening it at home. I had a light-bulb moment and wondered whether there was a difference in the version numbers for MSCOMCT2.OCX at work and at home. Turned out the work version was newer. I then copied the MSCOMCT2.* files from work, made a backup of them at home and copied those from work to my C-drive (Windows XP - c:\windows\system32\ ).
No luck. I then rebooted the machine - still no luck.
Then, finally I unregistered the old DLL via
Code:
regsvr32 /u c:\windows\system32\MSCOMCT2.OCX
(not sure if this was necessary, but I didn't think it could hurt). Reregistered the DLL via
Code:
regsvr32 c:\windows\system32\MSCOMCT2.OCX
and what do you know - it worked.
Summa summarum - it could be an idea to check whether the two machines have different version numbers for the MSCOMCT2.OCX files.
I know Excel "ok", but I don't know programming.'
I'd like to be able to do something very simple (for now)...
For example...if I had PRODUCT / CODE / INV VALUE
A - CODE A - 5
B - CODE B - 11
C - CODE C - 14
I would want to be able to click a button (or scan a code for) : ADD +1 or REMOVE -1
...then scan the barcode on the product (A) and have it add or remove one, respectively. So, if the row for A is:
A - CODE A - 5
I choose "ADD" (with a button or scan code), then scan the barcode, and the spreadsheet automatically finds the code in the sheet, and changes the corresponding inventory value:
A - CODE A - 6
Does that make sense? How might I go about doing that?
i've got the following problem:
I want users to double-click on a row on a protected sheet and then do some code based on the row-number of the clicked cell. I've protected the sheet because it contains a lot of formula's.
When a user double-clicks a row it triggers the code through the Workbook_SheetBeforeDoubleClick event.
After the code is executed Excel shows a message that the cell that was clicked was protected etc etc.
How can I prevent this message from popping up?
I've already tried
Code:
application.displaywarnings = false
but that didn't work
Thanks