Sort Entire Row

Good Morning Folk

Is there a way to sort a list of names alphabetically and put any blank cells to the bottom rather than the top

Cheers Jim

I have searched and read all the help files. I find the properties of
an object, I see how I can "lock", "size and move with cells" or "not
move with cells". No matter what I select, the object moves off the
screen, when the user, scrolls to the right of the spreadsheet.

Is there a way to lock the position, let's say , in the upper right
corner and have it stay there?

This would be quite useful for an EXIT button, that I have created,
that will close the program without saving (it's a read-only file.)

Thanks to all the wonderful people here that have been so helpful and
give us their valuable insight and time.

Jo

I need to lock consecutive rows together before sorting. e.g. A1 contains a name and A2 is blank: B1 contains data related to name in A1 - so does B2, and so on. Therefore need to lock rows 1 and 2 together, then 3 and 4 together and so on, but sorting on the data in the first cell of the group e.g. A1

Hi all,

I'm looking for help in building a formula which will sort numbers into different "buckets". My spreadsheet has a range of values in column B. These values can range anywhere from -100,000,000 to +10,000,000. I'd like to be able to sort them into the following buckets:-

Still learning VBA - I am trying to delete an entire row based on a condition in one cell in the row. Typically I would just filter on that value and delete the rows, but I am not sure if that is a possibility in VBA code. Can you provide the code if not too complex.

Select Cell A1 if value is 100 delete entire row, else skip to next row. Then loop through each row in the spreadsheet till all rows with selected cell equal to 100 are deleted.

Hi,

I'd like help in creating a macro that deletes an entire row that has emtpy cells in col B, C & D in the same row.
So for example if I have empty cells in b3,c3 & d3 I'd like the row deleted.

I've used the code below for just column B but I need to include column C & D as well. I tried putting Columns("B:D") but it deletes everything.

Code:

Sub Step4()
   On Error Resume Next
   Columns("B:B").SpecialCells(xlCellTypeBlanks).EntireRow.Delete
End Sub

I'm sure it's something simple... like me !

Any help much appreciated

Wrightie

Hi,
how do I select (in VBA) all the rows that were filtered out by autofilter (using VBA code) and delete them leaving just header. I just can't figure out how to select entire rows when the data is filtered...
Thanks for your hints!

I have a workbook with 50 sheets (1 for each employee).

How can I get Excel to sort these into alphabetical order ?

(From kyeoward@hotmail.com)

Hi there,

I'm very new to Excel, and I'm having trouble figuring a few things out. Hopefully this will be very easy for you guys!

In Sheet 1, I have a column of cells that I would like to also appear in Sheet 2. If I add a new row to the column in Sheet 1, I would also like it to be updated automatically in Sheet 2. Currently, I can get it to show the contents of individual cells from Sheet 1 in Sheet 2 by using this formula in the formula bar for each cell in Sheet 2:

=Sheet1!A3 (or whichever cell it is)

That's fine, but I'd like to just have a formula that will reproduce the entire column (ie. without a fixed range, as new rows are going to be added to the column).

If anyone could point me in the right direction, I'd be very very grateful. Thanks.

ok. vba newbie...

i want to select and entire row in excel in sheet 1, and paste the entire row into sheet 2. (2 different worksheets in the same workbook)

what code do i need to do this?

I'm trying to have separate column widths in the same column, based on the rows.

the top half of my spreadsheet are assumptions, formatted with the corrects widths needed, but then below I have calculations and such that I do not want the same widths for. how can I lock in the top part so I can decrease the column widths for the bottom half of my spreadsheet?

hope this makes sense.

is it possible to put two formulasinto one cell?

On the attached timesheet there are columns IN, OUT, IN,OUT
The lunch time is worked out by deducting 'C8 from C9' and this works fine when all 'IN, OUT' cells are filled in but for some reason when just the first two cells are filled in it gives a -12 hour answer.

looking at cell 'C11 ' in the attached worksheet, I currently have the formula
=IF(C13=0,","SUM(C9-C8)) The reason for this is to make it look tidy by having blank cells until a calculation is needed,, My problem is, If someone just comes in for the morning one day for instance 8am to 12 noon then they won't have lunch, but C11 will show -12:00
Can I put another formula into C11 to tell it not to deduct C8 from C9 until a time is put into C9.
The following is the sort of thing (many variations) I have been trying but because I'm hopeless at formulas I'm not having any success
Thanks

=IF(C13=0,","SUM(C9-C8))OR,IF(C9,ISBLANK,"",SUM(C9-C8)

Afternoon all,

I'm hoping someone can help me.

I need to be able to clear the contents of cells in column C, D, E, H if the value of column Q equals HELLO for arguments sake.

Clearing the contents of an entire row is not a problem, however when it comes to resizing rows I seem to come unstuck.

Related thread: http://www.mrexcel.com/forum/showthread.php?t=476993

Any help would be appreciated.

Hi all.

I have set up a workbook that is sent out to lots of different users. They each keep and use their own copy.

I have set it up so that everything looks OK and is visible on MY screen, but I'm conscious that some users may have different screen sizes, different toolbars set up, and so on, which might make some parts not immediately visible to them.

I have set up an auto-execute macro which automatically sets the zoom factor to best fit, for several of the worksheets, and this works fine.
Here's the code that does it.
Code:

Sheets("WELCOME").Select
    Range("A1:N18").Select
    ActiveWindow.Zoom = True

By repeating this code for each worksheet, I can make each one be zoomed just right.

However, the file contains 8 sheets that are all identically laid out, except the number of rows is different.
What I want to do is go to the worksheet that has the largest number of rows (it's always the same worksheet, so I know which one it is), set the zoom factor for THAT worksheet (which I can do, and it always has the same number of rows), and then take THAT zoom factor, whatever it is - and it will vary depending on the user - and apply that to the other worksheets that have a similar layout.

I could just go through each worksheet and zoom it automatically, but that would mean that some of the sheets looked very large, others very small, and I'd like them to have a consistent appearance.
I could also specify a range on each worksheet that was similar to the appropriate range on the longest worksheet, and zoom that automatically, but that's not ideal either, because some of the row heights vary from sheet to sheet, and again I'll end up with different font sizes.

Anyone know how to do this ?

Corporate edict.

I have a worksheet that is locked and protected now, except for cells in a certain collumn. I have named the cells in that column "MS96A".

If a user enters a date in a cell or range of cells anywhere in the column, the changed cells also need to be locked and protected (Once they enter a date, it is not allowed EVER to be changed again. Corporate requirement! *Shrug*).

What I am looking for is this. If the user selects that cell again, they will get the usual pop-up message, "The cell or chart that you are trying to change is protected..."

I think I am close, but I am getting an "End If without block If" error on the If Clause.


Sub Worksheet_Change(ByVal Target As Excel.Range)
Dim MRange As Range
Set MRange = Range("MS96A")
' If Not Intersect(Target, MRange) Is Nothing Then For Each cell In MRange Sheets("Sheet1").Unprotect Password:="temp"
cell.Interior.ColorIndex = 3
cell.Font.Color = vbBlack
Selection.Locked = True
Selection.FormulaHidden = False
Next cell
ActiveSheet.Protect Password:="temp", _
DrawingObjects:=False, _
Contents:=True, _
Scenarios:=False
ActiveSheet.EnableSelection = xlUnlockedCells
End Sub