Picture (logo) Disappears After Adding To Header

I am looking for the code to select the visible data after applying a data filter. Actually I know how to select the data after applying the data filter but the issue is I am not able to exclude the header row and give the target range as used (non-blank) rows only!!

I am using below code to Select the Visible rows in the target range:

Code:

Range("A:p").SpecialCells(xlCellTypeVisible).Select

Problems in this code a

1) after applying the filter, while selecting the data it is selecting all the rows in given range till last row on the workbook. I need this to select the the data only till the last used row in the given range.

2) It is not possible to provide the address of the first row after we apply the filter since the first row address may change depending on the values in the table.

E.g. 1st time when I am running the macro the first row in the visible filtered data is starting at Cell address A4 and next time when I will run the macro it may be A6

3) The Code is also selecting the 1st row which is a header row. How can we exclude it from selection.

Some one please revert with the solution.
Thanks in advance.

Hello,


I need vba code to Select first visible cell below the header row after applying autofilter on column Q of the data. Can somebody help me on this?


I tried

http://www.mrexcel.com/forum/showthread.php?t=403989

but it does not work. Probably because column Q is filtered to show only blank cells,

Can somebody help me on this?

Thanks,
awagdarikar

Imagine a whole box of lengths of aluminium sections for making windows.

To make those windows I need to cut these lengths into smaller sizes.

I need to do this economically.

How can I use Excel to help me make this a reality.

Firstly you would take a big size out of it and then another size out of the offcut piece.

And then another size out of the offcut left over.

I need to know how many full stock lengths (6500) long it will take to cut all the pieces listed above.

Is it possible?

You need to take into account the quantity of each size and fit it all in together for the most optimal outcome.

See attached example of possible layout.

Is there a trick to copy-paste a group of cells into Outlook? I don't want to paste as a picture (shows up as an attachment and is lost when someone else Replies), but formatting is skewed when pasted as an Excel object. Right now I'm recreating the table in Word, then pasting, which doesn't loose formatting.

A specific problem is cells which don't have borders show up with very light grey borders in Outlook. This, I do not want.

TiA

Hi all,

I have several accumulated values from other spreadsheets on my spreadsheet and I'm combining and organizing them on mine. However, the cell alignment isn't working properly as you can see in the picture below.



Now, I can certainly retype these values and align them and they'll align all nice and neat; however, I have a huge Column and retyping that column would take an inordinate amount of time.

I searched earlier on cell alignment and couldn't find anything. Any help is appreciated.

Sincerely,
Bill

Hi,
how do I select (in VBA) all the rows that were filtered out by autofilter (using VBA code) and delete them leaving just header. I just can't figure out how to select entire rows when the data is filtered...
Thanks for your hints!

I did a search in here but didn't find an answer so here goes nothing...

I have a spreadsheet with data from A1 to H1 down to A275 to H275. I select all of it, Copy, go into the Sheet2 tab and select A1, Paste Special -> Transpose and it give me the following error message:
Quote:

The information cannot be pasted because the Copy area and the paste area are not the same size and shape. Try one of the following:
- Click a single cell, and then paste.
- Select a rectangle that's the same size and shape, and then paste.

For the life of me, I can't figure out why it's not working! I have done this many times with other spreadsheets. Has anyone ever experienced this? If so, were you able to resolve it and how?

Many Thanks,
Mike

Hi All,

Random question i have a large Excel Workbook (which is protected) and has over five sheets on it - however one sheet has randomly decided not to scroll... yes i know sounds random! If i use the cursor and down arrows the selection just disappears off the screen.
The page will scroll if i filter by one field, but not if i select (All) for all filters.
All other worksheets scroll fine.
Any suggestions?

Thanks in advance.
Cheers Kaite

I have a weird one here. I cannot scroll up or down on a particular worksheet. All the other sheets in the workbook operate successfully, but this one appears to be locked. I have tried both the right hand scroll bar and the mouse. The indicator on the scroll bar moves but the page is "stuck". I have copied it out to a new workbook and this is consistent behavior here too.

Cheers,

Doug

I have searched and read all the help files. I find the properties of
an object, I see how I can "lock", "size and move with cells" or "not
move with cells". No matter what I select, the object moves off the
screen, when the user, scrolls to the right of the spreadsheet.

Is there a way to lock the position, let's say , in the upper right
corner and have it stay there?

This would be quite useful for an EXIT button, that I have created,
that will close the program without saving (it's a read-only file.)

Thanks to all the wonderful people here that have been so helpful and
give us their valuable insight and time.

Jo

Hi all.

I have set up a workbook that is sent out to lots of different users. They each keep and use their own copy.

I have set it up so that everything looks OK and is visible on MY screen, but I'm conscious that some users may have different screen sizes, different toolbars set up, and so on, which might make some parts not immediately visible to them.

I have set up an auto-execute macro which automatically sets the zoom factor to best fit, for several of the worksheets, and this works fine.
Here's the code that does it.
Code:

Sheets("WELCOME").Select
    Range("A1:N18").Select
    ActiveWindow.Zoom = True

By repeating this code for each worksheet, I can make each one be zoomed just right.

However, the file contains 8 sheets that are all identically laid out, except the number of rows is different.
What I want to do is go to the worksheet that has the largest number of rows (it's always the same worksheet, so I know which one it is), set the zoom factor for THAT worksheet (which I can do, and it always has the same number of rows), and then take THAT zoom factor, whatever it is - and it will vary depending on the user - and apply that to the other worksheets that have a similar layout.

I could just go through each worksheet and zoom it automatically, but that would mean that some of the sheets looked very large, others very small, and I'd like them to have a consistent appearance.
I could also specify a range on each worksheet that was similar to the appropriate range on the longest worksheet, and zoom that automatically, but that's not ideal either, because some of the row heights vary from sheet to sheet, and again I'll end up with different font sizes.

Anyone know how to do this ?

I am trying to figure out how to write a formula to figure out production cycle time.
We will be building 8 "widgets" a day.
We will work 10 hours a day.
There is a 20 minute break at 9:20 am.
Production shuts down for lunch 30 minutes for lunch at 12:30.
Production starts at 6:00 am.
Here is what I can do.
Production cycle time = (10*60)-30/8 or 71.25 minutes
If we start at 6:00 am, the first scheduled cycle completion time = TIME(6,0,0+71.25/1440)

My problem is when I am trying to use a logical "IF' statement to account for the 20 minute break or lunch and still calculate the end of each cycle time through the day I receive a number of error messages.
This is the formula I am trying to make work. I have the cell the formula is in, formatted with a "mm,ss" format.
=(IF(D4+G1/1440>9:20,(D4+G1)/24,(D4+G1+15)/1440))
I have included an attachment to help (a picture is worth a thousand words).

Any help will be greatly appreciated.
I have bought a number of books in an attempt to figure this out, and I am still stumped

I saw two threads in this forum that asked this question, with no good answer. I am posting this solution for anybody still struggling with this.

The question:
How can you prevent a cell's contents from overflowing into the next cell?

Of course, you can make the column wider or turn on text wrapping, but you might not want to. Each of those solutions can mess up the layout of your sheet. You may just want to truncate the value.

Some people have suggested putting a space in the next cell. This is unnecessary, a pain in the but, and will mess up any ISBLANK type formulas, among other things.

The solution:
Select the cells in question and turn on text wrapping (Format>Cells>Alignment>Wrap Text).
Now select the row(s) in question and manually set the row height, by right clicking the row number and selecting "Row Height". Check the height of an adjacent row for a good value.

Your cells will now not spill over either horizontally or vertically. They will simply truncate anything that doesn't fit.

Be careful now, because parts of your data may be hidden. This can cause its own set of problems if one or two digits are neatly hidden away. Think ahead if other people might be using this sheet, and not be expecting to have some data hidden.

Tested in Excel 2002

Hello, what I would like to do is take a portion of a sheet..... So the cells I want to mirror are in the proposal sheet cells B32 x F51. And then mirror the exact duplicate copy to another sheet. The other sheet should have those same values at A20 X G39. What I am trying to do is have a sheet that has skus, prices, and so forth and then when I add,delete, merge, color, or do anything to the cell on the "proposal creation" sheet I want it to mirror only a specific cells to another sheet that is "salesman copy" that we will print to clients. So this way ont he proposal copy a salesman can insert rows or even change the color of the cells and then have it mirror exactly the same on the "salesman copy" which is what we will print for clients. Thank you.

I'm working on an Excel file that it's size is about 90 M.B and that makes it very slow to deal with ... is there anyhow to make it faster ???
i use in it alot of formulas and conditional formats
thank u