Match Function To Find Name With Comma

I am trying to sum all numbers <0 using the SUMIF formula in Excel 2003.

FORMULA: =sumif(range,criteria,sum_range)

I got it to work, but I have cell ranges to total that are not next to each
other (such as A5:A15 and C5:C15).
When selecting the ranges for the formula, Excel writes them A5:A15,C5:C15

because of the comma (,) between the cell ranges Excel is reading the A5:A15
as the range and C5:C15 as the critera. How can I get this formula to allow
me to select multiple cell ranges?

All help is appreciated.

Thank you.

This is probably an easy question for most of you, but it's killing me. I tried searching before I posted this, but the suggestions given didn't seem to work for me.

I need to look up data from a cell on one Excel sheet, compare it to a list on a 2nd sheet and when they equal, take a value from a different column on the 2nd sheet and drop it back on the 1st sheet. Since that's a horrible explanation, let me try explaining it this way:

Sheet 1
Column A has a long list of code type 1s
Column E has a long list of code type 2s

Sheet 2
Cell C2 has code 1
Cell E2 needs code 2

I know it should take an index/match function, but nothing I try is working. What I'm trying is the following formula in Cell E2 of sheet 2:

=INDEX('Sheet 1'!A:A,MATCH(C2,'Sheet 1"!E:E,0),5)

But all I get is no result. What's driving me bonkers is that if I copy everything over to a single sheet, that formula works fine.

Hello,

I have two columns of data: column A contains the date and time in the form dd/mm/yyyy. Column B contains a number value. All the times are in order, so column A looks like:

01/01/2007
02/01/2007
03/01/2007

I have data from 2007 to 2010. I need to calculate an average daily value (in column B) for each month, and display it in column C. So, for January, I need to calculate the average of 31 days, February, 28 days, etc.

Is there a function I can use to do this? I've been trying the AVERAGEIF formula but can't get it to work. Any ideas would be much appreciated!

Many thanks,
Caitlin

Hello, I am pretty new to excel programming/messing around so I'll refer to those who are much wiser than I am. I am trying to set up a form for work, in this form I want to have a page with a bunch of cells pre-sized. What I want to do is when I insert a picture from a job site, that when this picture gets inserted, it will automatically resize to fit within the cell. I don't have time to manually resize dozens of pictures and if I could get this to work it would be awesome! I tried to search for an answer using the search function, but I kept getting a fatal error about allowable memory? Thanks in advance for you help!

Hi folks,

Hoping someone can help me quickly as I'm pulling my hair out and have a deadline getting too close.

Been trailing the net and this board but can't work out how to do a simple variance.

How do I work out the difference between two numbers - including negatives.

If the numbers are all positive, it's fine as it's simply a case of A - B = C which is your difference. However, that doesn't work if B is negative.

I need a formula that would give the following:

First Number / Second Number / Difference
1 / 5 / 4
1 / -5 / -6
-1 / 5 / 6
-1 / -5 / -4
-5 / -1 / 4

Hopefully there's a simple function I've been missing.

Thanks in advance, R

I have the strangest problem... somehow, right clicking a cell doesn't
bring up a menu anymore. It happens only when I'm in Excel only... it still
works even if I bring up macro editor within Excel... it only doesn't work
when I'm in Excel. I've tried Options and Customize... nothing there seems
to work...
HELP!!!

I did a bit of browsing on this problem. Found others suffering the same but haven't found any conclusive answer yet.

Every so often when I attempt to save a file, (including save as), Excel won'r let me. By won't let me I mean:

using Save doesn't appear to do anything using Save As doesn't either do anything, the dialog is not displayed and if I am doing via the File menu then the File menu is exited and the previous ribbon tab is displayed (i.ethe one I was on before clicking 'File') if I close the workbook I am prompted to save, close without saving or cancel. Clicking save just invokes the same msgbox again. I can't work out when it goes into this mode. Some days I can work without this problem, other days I encounter this 2 or 3 times.

The only thing I could suspect was I think this started around about the time I installed xlDennis' code library. I have uninstalled the addin and so far so good, but I cannot categorically say that this was the cause.

Anyone have any idea?

Cheers
Jon

Edit: I have read this: http://support.microsoft.com/kb/271513
Doesn't seem to cover the issue I describe

Is it possible to share a workbook with macros and have the macros work properly. I have one spreadsheet that needs to be shared by many users. We want to all be in the same document at the same time saving changes. The real catch is that the workbook has macros. I used the 'Share Workbook' function under tools. At the end of the setup, it told me that the macros would not work properly. The odd thing is that everytime I try to click on one of the macros I get an error, but yet the macro still performs the function. So essentially the macro works, it is just a pain because you have to click 'end' everytime on the error screen. Any suggestions?

Alanda

hi,

I would like a formula that would list all the items in row B that match the criteria in row A. the first cell with formula would list the first item, the second cell with the formula would list the next item, and so forth. Also, column B might have a duplicates that should be listed. Is this possible? I cannot manipulate the order of the original items (ie, filters) because this data is being used to derive other formulas.

I am trying to work out how to calculate the geometric mean of a series of values, some of which are negative, ie. investment returns over a series of years with some negatives.

The Geomean function doesn't work because it only uses positive numbers.

Any help would be greatly appreciated.

Hello, I'm trying to count the number of times a name appears across multiple worksheets but I can't seem to figure it out.


I have 6 sheets to count and all the names are in column A (from A1:A100) on each sheet. The names are not in a particular order.

On sheet 7 I want to have a cell beside each persons name that counts the number of times their name appeared on the other 6 sheets.

For example Sheet 7 (called total) would have

Joe 5 (where 5 is the outcome of the formula I'm looking for to count all the times "Joe" appears on sheets 1-6).

I have it counting per sheet with =COUNTIF(A1:A130,"name") but this is not quite what I am looking for.

Thanks in advance for any advice.


Edit: I am using Excel 2007 w/ windows XP

In Excel I have been trying to find an easier way to calculate a time
difference where the times cross midnight. Example:
Start time: 23:50:00
End time: 00:15:00

How would you formulate an equation to determine the duration of time or
differnce between the start and end time?

Good day... I need an IF Function that will allow me to action a time in a time range:

... If the time 04:16 falls in the time range 04:00 - 04:29, than put a one (1) in the filed x...
... If the time 04:16 doesn't fall in the time range 04:00 - 04:29, than leave the x fiel empty

Any help is appreciated.

So I've got some data, which has the approximate form of a sine function. I want to find all the x-axis intercepts. I tried using the intercept function and swapping around the y values for the x values, but it only returns 1 value (so I'd guess it uses a linear regression to estimate a single line through the axis).

I was thinking of trying a nested if/and statement but I haven't quite figured out how to do it. Basically I want to identify the two values where it switches from positive to negative and also indentify the values where it goes negative to positive, I can then fit a straight line between them to find a better approximation of the intercept (though it might not be necessary). Preferably I'd like it all one function as I'm not doing it in VBA (I might do later though, we'll see).

Can anyone suggest how I'd find these value or the x-intercept. Any help would be greatly appreciated.

Good afternoon,

Is there a way to enter a colon into a standard number to create a value that can be formatted into a 24 hour time value ?

eg a time is listed as 1345 with a general number format, and I want it returned as 13:45 witha custom format of hh:mm.

Other than creating a table and using a vlookup function, I am hoping there is a better way?

Darren