Can Only Copy A Cell Once, Then Paste Is Greyed Out |
Can Only Copy A Cell Once, Then Paste Is Greyed Out - Excel |
|
I have excel 2007 and on any cell I copy either Ctrl C or Copy from the lsiting then move to any other cell I can do Ctrl V or Paste once, then the cell contents disappear from the clipboard and the Paste option is now gray. I tried F2, SHift - Home and then Ctrl C, followed by multiple Ctrl V's and it works fine, but I should not have to do this every time. all help appreciated
Similar Topics
between Excel workbooks. They can copy and paste between worksheets. When
you highlight the section to copy and then go to the new workbook both the
paste
and paste special are "grayed out". This is true whether you right-click the
mouse, go to the edit menu, or use control keys. This occurs with any data
type and the most simple workbooks. I have seen some suggestions here but
none have worked for this particular problem. I have reset the menus and
renamed the .xlb files and neither helps. You can open the clipboard and the
paste will work, but there is no paste special option. Any help would be
greatly appreciated. Thanks!
A1 type in 10, A2 type in =A1 (calculated A2 to be 10)
B1 type in 5
And then click the copy on B1, and then click paste special on cell B2, the only options it gives me are text and unicode text and so no matter how I paste, cell b2 will always be populated with a value of 5. I cannot imagine a simpler copy and paste and no matter what I do I can't make this work.
All cells are formatted as general. It seems that all copy and pasting of formulas in my excel has been disabled. If I open any spreadsheet on my computer, I can't copy and paste formulas, but do the exact same thing on the exact same spreadsheet on any other computer and it works no problem.
Any help?
I am trying to understand why I can not use Ctrl+F to find data in Column B, yet I can find the data in Column A.
I have a worksheet that in column A has numbers, in column B, the following formula "IF(ISNUMBER($A1),$A1,"").
Ctrl+F will find numbers in Column A, yet not in Column B. Why is this so? What can be done to ensure Ctrl+F works in Column B?
Am in need for this solution very badly and what could be a better place than excelforum !
I have an MS Excel File (2007 version) sample file attached, which has name, designation, blood group and so on. The last column is for hyperlinking photographs of individuals.
In the same folder where I have saved this excel file, are lying photographs of individuals. While scanning the photographs, I have saved them serially i.e. 1,2,3 and so on.
In the Excel file, in last column, I have given the respective serial numbers. In order to hyperlink one has to select that particular Cell, press Ctrl K and you automatically go to the folder containing individual photographs, you select that photo and OK.
Problem :
I have to do this hyperlinking one by one and if there 1000 photos, lot of time is wasted.
Solution Needed :
Just in case of excel formula, which we copy and paste, Can I get a command by virtue of which the column titled Photo or column next to it gets automatically Hyperlinked to respective photo WHEN I copy and paste such command to all cells in that column.
Thanks a million and warm regards ::: Jack
I use filters a lot at my work. One thing I've noticed is that if I have something filtered and want to copy and paste only what I see from one column to another column right next to it, it will copy what is filtered, but then paste into the unfiltered portion.
Is there some way to copy only what I see when it's filtered, THEN paste only onto the adjancent cells which is also filtered?
For example let's say i have each of the number below in a cell (Fig 1). And then I hide rows 2 -3, so only 1 and 4 is showingI only see 1 & 4 in column A. I want to copy and paste 1 and 4 to the next column over one row so it looks like Fig. 2 when unhidden. Not like Fig. 3.
Fig. 1
1
2
3
4
Fig. 2
1 1
2
3
4 4
Fig. 3
1 1
2 4
3
4
How can I reset where Excel thinks the end of may data is?
When I press Ctrl+End it highlishts column ANC when really my data now finished at Column AC
thanks
I want to know how to copy part of a cell and paste it into a new cell.
Example:
a1= 8hAs7c
portion needed: 7c
I used this formula:
=RIGHT(A1,2)
This returns 7c like I want.
However in the next cell I want to source the middle two (As)
And in another cell I want the first two (8h)
How do I go about this?
http://www.xcelfiles.com/VBA_Quick13.html
http://www.mrexcel.com/archive2/75500/87639.htm
Taxstar
Looking for some help and would appreciate your help. I want to prevent people cutting/copy/pasting on a spreadsheet I have developed. A couple of users keep doing so which in turn knackers my formulas. There will be occasions where I will need to be able to use these functions for maintenance and updates. Ideally I would like have a private marcro which I can run to enable these features as and when needed.
I've been at this all morning and feel like I'm going round in circles. I've tried various bits of code (sourced via google etc) & have ended up with a whole manner of outcomes but not the one I want.
To summaraise what I am looking for is some vba code which will do the following Disable cut,copy and paste when sheet is opened Enable cut,copy and paste when closed Have a macro which when run will allow me to cut/copy paste so as to implement updates when necessary.
Can anyone help?
Thanks in advance
I have a spreadsheet with data from A1 to H1 down to A275 to H275. I select all of it, Copy, go into the Sheet2 tab and select A1, Paste Special -> Transpose and it give me the following error message:
Quote:
The information cannot be pasted because the Copy area and the paste area are not the same size and shape. Try one of the following:
- Click a single cell, and then paste.
- Select a rectangle that's the same size and shape, and then paste.
For the life of me, I can't figure out why it's not working! I have done this many times with other spreadsheets. Has anyone ever experienced this? If so, were you able to resolve it and how?
Many Thanks,
Mike
result. Also the file size seems to be increasing to a much larger size for
no reason.
Any feedback would be appreciated.
Example:
A1: 50
A2: 10
B1: 60
B2: 20
A3: Formula: =A1+A2 Displays: 60
Right click A3, Copy, right click B3, paste
A3 displays 60
When I click save, it will change the display value to 80.
I am trying this on his workstation and mine. Mine has Office 2010, so I think there might be an issue with the file itself.
Also, not just copy and paste. I can also just click the top cell after filling in the formula and then drag the bottom right of the cell downward and it will do the same of filling in the correct formula, but have the incorrect value.
I know that I could get him to just click save each time before really looking at the results, but that is just a band aid to the problem.
Any ideas how to fix this?
(changes the cells it should subtract), however, the result stays the same.
It matches the formula I copied it from, even though the cells to calculate
are now different. I even did a paste special and said only formula, but
still, same result. If I actually type in the formula, it works fine, but I
have a lot I need to copy and paste. Is there a way I can fix this?
Thanks,
My problem is Tab no longer moves your active cell selection one to the right. It now moves to the last cell in your spreadsheet to the right (similar to CTRL+Arrow Key Right).
I seem to remember this being a simple setting you can change, but was unable to find it myself, or search the web for the way out. So my last result is asking the experts .
Do any of you know how to make it so Tab goes back to just moving one cell to the right again?
Thanks in advanced.
I am a new user and trying to setup a database in excel. I can select all addresses and copy but when trying to paste into excel it does so in 1 cell.
Is there a way I can paste the separate email id's into individual cells so I don't have to do it individually?
Many thanks
Patrick
mouse. Using Office 2000. Can you help? Thank you!!!
I am using Excel 2007. In prior versions of excel, when copying data, if I wanted to copy visible cells only, I would select "Go To, Special, Visible Cells Only" and then copy a range a cells. The default was always set to copy everything (including hidden cells), unless I specifically selected copy visible cells only.
In 2007, the default is somehow set to always copy only visible cells. Sometimes, I want to be able to copy all cells including those hidden but cannot seem to figure out how to swith this default option. I looked under Excel Options and did not see an option there.
I don't want to have to unhide and rehide everything each time i copy. I know i could do the hiding and unhiding via VBA but would prefer not to have to.
Thanks for your suggestions.
For instance,
A B
1 $32.17 8/17/08
2 $43.20 9/12/09
If I go in and update cell A1 to $33.98 today I would like cell B1 to read 2/16/10. But I don't want cell B2 to change.
Thanks
=IF(a1=0,"ERROR","")
The trailing "" returns an empty cell. The problem is, it is not TRULY empty. If I fill that formula down, I cannot, for example, jump from one "ERROR" cell to the next by hitting Ctrl arrow-down because it seems to think that these empty cells have contents.
Is there a way to designate, in such a formula as above, to return a TRULY empty cell?
Thanks