Aging (date) Formula

I am trying to automatically capture and record the date of a cell's last change in value (date stamp). I have an item price list and if a particular cell gets updated I want to automatically record the date of change of that cell. I realize that after I change cell A1 I could tab to cell B1 and enter Ctrl+; but if I have a hundred new prices to enter I don't want to do that (plus me or the data entry person might forget).

For instance,

A B
1 $32.17 8/17/08
2 $43.20 9/12/09

If I go in and update cell A1 to $33.98 today I would like cell B1 to read 2/16/10. But I don't want cell B2 to change.


Thanks

Hello, please help me out with this one.

So I am at work workin on this report and I need a function that will make Excel automatically insert the today's date in a cell (let's say D90) when I fill the content of another cell (for example C90) and the that will be inserted will never change. I tried to use the =TODAY( ) function but it keeps updating the date in the cell to the current date if i reopen the worksheet 2 days later. I need the cell to keep in the cell the date of the day when I filled in the content of cell C90 and do not updated it every time i open the document to the actual date.. Thanks in advance!!

I have a spreadsheet set up with an employees information, including the start date. After each year that the employee is working, he gets bumped up on the pay scale. For this reason, I only need to know how many years the employee has been working, rounded down to the nearest year.

This is what I have so far (hire date is in column B):

=((TODAY()-B4)/365)&" YEARS"

This function gives me a number with many decimal places.

I tried:

=ROUNDDOWN((TODAY()-B4)/365),0)&" YEARS"

It tells me I have too few arguments. Please help!

This formula is supposed to calculate difference between today and date hired to give years and months of service. Works fine for all except if the person was hired in year 2000 then this formula shows 110 y. Any one know how to fix this? or have a different formula that works.

=DATEDIF(E21,TODAY(),"y")&" y "&DATEDIF(E21,TODAY(),"ym")&" m"

Thanks
Rick

Hi was wondering if anyone can help.

I am trying to reference a cell on another worksheet, the cell is formatted to be a date. when i put in the following formula =Sheet2!A1 and i don't input a date into A1 on sheet 2 the cell containing the formula shows the date 00/01/1900, is there any way of stopping this showing, ideally the cell would be blank until I inputted a date into A1 on sheet 2

Any help would be very much appreciated

Great tip! But one thing: On my machine (Excel 2008 Mac), the values in the formula cell are not correctly calculated simply by dragging. Instead, the values are equal to the cell above (the first entry formula value). To get the correct value, I need to click in the formula bar and then hit enter. (I only discovered this after an hour of tinkering, figuring I had botched the formula!)

Are there any ways around this so that it updates upon dragging the formula?

I'm trying to format a worksheet to show how many days overdue certain tasks are, and running into a couple of issues. The sheet is set up with Due Dates in Column A, Days Overdue in Column B, and Date Completed in Column C. My first thought was just to use as simple a formula as possible in Column B =Today()-A2. This worked alright for tasks that already had Due Dates assigned, but if Column A was blank I'd get a high number in Column B. I also realized that tasks will continue to show as overdue even after I enter the completed-on date in Column C. Is there a relatively simple way to tackle this formula? Thanks in advance for suggestions. (I've attached an example with the column headings I want to use.)

Is there any way to automatically lock in the date after you pull it up with the TODAY function? Or is there another function that will do what I'm trying to do?

I want it to automatically fill in today's date, when a certain empty cell has a value put in, then freeze there.

Thanks in advance!

Hello from sunny Madrid

I have created a complex formula to help me calculating Golf handicaps for players.


The formula is in the first cell and I want to drag the formula across to the right to cover the 18 holes.

But ALL the values change and I want some to change and some to stay constant.



How do I tell excel to drag the formula across but keep certain parts of the formula the same..ie ....=D11.... in the formula when dragged across doesn't go D12,D13;D14 in each cells formula and should stay as D11 for all.

Many thanks for your help

Ole

HELP!!

I need to know the formula (if there is one) for Excel to figure all the possible combinations of a given set of numbers that will add up to a specified sum.

In other words, if I give the following numbers 1, 2, 2, 3, 3, 4, 5, 5, 6, 7, 7 - I want Excel to figure all the possible combinations that will add up to 23, and also SHOW ME those combinations, and not just HOW MANY combinations there are.

i.e. one possible combination is 2, 2, 3, 4, 5, 7

Can this be done? What is the formula? I'm having a hard time figuring it out!!

Desperately,
Jenny

I am using below code, but it only untill 19,999. Amount from 20,000 and above only show thousand? Please help!

For 19,999 it show
Ringgit Malaysia : Nineteen Thousand Nine Hundred NinetyNine Only

For 20,000 and above it show
Ringgit Malaysia : Thousand Only

Code as below:

Function SpellNumber(amt As Variant) As Variant
Dim FIGURE As Variant
Dim LENFIG As Integer
Dim i As Integer
Dim WORDs(19) As String
Dim tens(9) As String
WORDs(1) = "One"
WORDs(2) = "Two"
WORDs(3) = "Three"
WORDs(4) = "Four"
WORDs(5) = "Five"
WORDs(6) = "Six"
WORDs(7) = "Seven"
WORDs(8) = "Eight"
WORDs(9) = "Nine"
WORDs(10) = "Ten"
WORDs(11) = "Eleven"
WORDs(12) = "Twelve"
WORDs(13) = "Thirteen"
WORDs(14) = "Fourteen"
WORDs(15) = "Fifteen"
WORDs(16) = "Sixteen"
WORDs(17) = "Seventeen"
WORDs(18) = "Eighteen"
WORDs(19) = "Nineteen"

tens(2) = "Twenty"
tens(3) = "Thirty"
tens(4) = "Fourty"
tens(5) = "Fifty"
tens(6) = "Sixty"
tens(7) = "Seventy"
tens(8) = "Eighty"
tens(9) = "Ninety"

FIGURE = amt
FIGURE = Format(FIGURE, "FIXED")
FIGLEN = Len(FIGURE)

If FIGLEN < 12 Then
FIGURE = Space(12 - FIGLEN) & FIGURE
End If

If Val(Left(FIGURE, 9)) > 1 Then
SpellNumber = "Ringgit Malaysia : "
ElseIf Val(Left(FIGURE, 9)) = 1 Then
SpellNumber = "Ringgit Malaysia "
End If

For i = 1 To 3
If Val(Left(FIGURE, 2)) < 20 And Val(Left(FIGURE, 2)) > 0 Then
SpellNumber = SpellNumber & WORDs(Val(Left(FIGURE, 2)))
ElseIf Val(Left(FIGURE, 2)) > 19 Then
Ntow = Ntow & tens(Val(Left(FIGURE, 1)))
SpellNumber = SpellNumber & WORDs(Val(Right(Left(FIGURE, 2), 1)))
End If

If i = 1 And Val(Left(FIGURE, 2)) > 0 Then
SpellNumber = SpellNumber & " Crore "
ElseIf i = 2 And Val(Left(FIGURE, 2)) > 0 Then
SpellNumber = SpellNumber & " Hundred "
ElseIf i = 3 And Val(Left(FIGURE, 2)) > 0 Then
SpellNumber = SpellNumber & " Thousand "
End If
FIGURE = Mid(FIGURE, 3)
Next i

If Val(Left(FIGURE, 1)) > 0 Then
SpellNumber = SpellNumber & WORDs(Val(Left(FIGURE, 1))) + " Hundred "
End If

FIGURE = Mid(FIGURE, 2)

If Val(Left(FIGURE, 2)) < 20 And Val(Left(FIGURE, 2)) > 0 Then
SpellNumber = SpellNumber & WORDs(Val(Left(FIGURE, 2)))
ElseIf Val(Left(FIGURE, 2)) > 19 Then
SpellNumber = SpellNumber & tens(Val(Left(FIGURE, 1)))
SpellNumber = SpellNumber & WORDs(Val(Right(Left(FIGURE, 2), 1)))
End If


FIGURE = Mid(FIGURE, 4)


If Val(FIGURE) > 0 Then
SpellNumber = SpellNumber & " And Cents "
If Val(Left(FIGURE, 2)) < 20 And Val(Left(FIGURE, 2)) > 0 Then
SpellNumber = SpellNumber & WORDs(Val(Left(FIGURE, 2)))
ElseIf Val(Left(FIGURE, 2)) > 19 Then
SpellNumber = SpellNumber & tens(Val(Left(FIGURE, 1)))
SpellNumber = SpellNumber & WORDs(Val(Right(Left(FIGURE, 2), 1)))
End If
End If
FIGURE = amt
FIGURE = Format(FIGURE, "FIXED")
If Val(FIGURE) > 0 Then
SpellNumber = SpellNumber & " Only "
End If
End Function

I use a excel file through the course of the day and need to insert the current date in one column and the current time in the next column. I want to be able to just highlight the selected range of cells I need to insert into and hit a macro button and have the date and time inserted into just the cells I have highlighted. I'm not sure how to make this work with just the cells I've highlighted. Any help any one can give me would be greatly appreciated. Thanks!
Mike

Hello

I'm quite experienced Excel user. I've never come across this problem but tinkering in every conceivable way within Excel settings and the solution has eluded me.

I have added a worksheet created elsewhere (it is a form I need printing, with the data coming from 2 sheets I have created from scratch) which has pre formatted cells for Date and Client Name etc.

When I try to reference the cell in this added sheet from my 2 sheets, instead of the result, it always displays the formula, not the result.

I have tried doing it from one of my sheets to reference to this new, and that displays the result and not formula. I can't imagine why it's doing this and I've never seen it happen before.

Formatting cells, giving cells names rather than the usually adequate of reference to the Cell Number doesn't change things. I wonder if I've picked up some legacy protection from the original form but can't see anywhere in the tools etc that's obvious.

There's about 50+ cells that need referencing and I got to get this done for work.

Please help me. This is my first need to post on a Excel Forum as I've always found help or answers from other peeps or internet but this one is making me scratch my head big time.

Hi all,

I hope you can help me with what I would like to do. I've searched and searched and not come up with anything yet!!

I have one sheet which is my 'data' sheet with a number of columns, one of which is a date which may be repeated.

I then want to use another sheet with two cells where two dates can be entered and a button which allows you to copy the rows of data from the data sheet which have dates between the two specified originally. The list in the data sheet may not be in date order although I could update a macro to do this for me if needed. I would also like to do it so that if "ALL" is typed in the date fields, it pulls over ALL the data. (Or something similar)

Any help you can give would be much appreciated.

Cheers,

Kevin

Hi All,

If I drag a formula to the right it adapts the column letter in the formula from A to column B, which is standard Excel functionality.

However, if I drag the formula to the right I want Excel to skip a column each time.

In other words:

=A1 ; = B1 ; = C1

Should be

=A1 ; = C1 ; = E1 etc...

Is there an easy trick to do this?

Thanks,

Michiel