Lookup Multiple Values In A Single Cell (separated By Commas) And Then Return The Values To A Single Cell (also Comma Separated) |
Lookup Multiple Values In A Single Cell (separated By Commas) And Then Return The Values To A Single Cell (also Comma Separated) - Excel |
|
Sorry if that's a bit long winded...
Here's how it breaks down.
If I have, in one cell (call it D1):
EH,DR,HU
and in a lookup table on another sheet:
A B
1 ED T
2 EH F
3 DR G
4 HU H
5 SE E
6 YU E
I need to be able to lookup the values in D1 on the table and return the values in column B to a single cell (say E1), also comma separated...
eg...
F,G,H
Does that make sense or should I resubmit?
I've tried a few different ways but can't come up with anything...
There's more to the project, but this bit will help me get it off the ground and hopefully I'll be able to string the rest together.
Cheers guys! Great forum!
Here's how it breaks down.
If I have, in one cell (call it D1):
EH,DR,HU
and in a lookup table on another sheet:
A B
1 ED T
2 EH F
3 DR G
4 HU H
5 SE E
6 YU E
I need to be able to lookup the values in D1 on the table and return the values in column B to a single cell (say E1), also comma separated...
eg...
F,G,H
Does that make sense or should I resubmit?
I've tried a few different ways but can't come up with anything...
There's more to the project, but this bit will help me get it off the ground and hopefully I'll be able to string the rest together.
Cheers guys! Great forum!
Excel VBA Course - From Beginner to Expert
200+ Video Lessons 50+ Hours of Instruction 200+ Excel Guides
Become a master of VBA and Macros in Excel and learn how to automate all of your tasks in Excel with this online course. (No VBA experience required.)
(80% Discount Ends Soon!)
Similar Topics
Hello,
I am new to using Excel and I am not very computer literate. I am looking for some help with a spreadsheet I am making. Here is the problem:
I have a column of 14 numbers in cells A1 to A14. If all of these values are less than 2%, I would like a "Pass" to display in cell B1. If any of these values are greater than 2% I would like a "Fail" to display in cell B1.
I have got a formula that works for a single cell but I can't figure out how to get it to apply to more than one cell. For example, I have entered =IF(A1<2,"Pass","Fail") in cell B1. Now if the value I enter in A1 is less than 2, it shows a "Pass", and if the value in A1 is greater than 2 it shows a "Fail" in cell B1. How can I get this to apply to all of the cells from A1 to A14?
If somebody could help me out that would be great.
Thanks,
Randy
I am new to using Excel and I am not very computer literate. I am looking for some help with a spreadsheet I am making. Here is the problem:
I have a column of 14 numbers in cells A1 to A14. If all of these values are less than 2%, I would like a "Pass" to display in cell B1. If any of these values are greater than 2% I would like a "Fail" to display in cell B1.
I have got a formula that works for a single cell but I can't figure out how to get it to apply to more than one cell. For example, I have entered =IF(A1<2,"Pass","Fail") in cell B1. Now if the value I enter in A1 is less than 2, it shows a "Pass", and if the value in A1 is greater than 2 it shows a "Fail" in cell B1. How can I get this to apply to all of the cells from A1 to A14?
If somebody could help me out that would be great.
Thanks,
Randy
I would like to copy a small table from Word into one cell in an Excel
worksheet. The first column of the table is a list of numbers. I tried
converting the table into text with manual line breaks and tab stops to
divide columns and rows, but that didn't solve my problem.
Excel pastes the data into several rows. When I try to merge them, I
get a warning that the selection contains multiple data values, and
merging into one cell keeps the upper-left most data only.
What I tried that didn't work:
* Formatting the Excel cells as text before pasting the data.
* The various options for "Paste Special." The closest I got was
inserting the table as a Document Object, which could be a workaround,
I guess.
What I am saving for when all else fails:
* The obvious solution of copying row by row into one Excel cell.
The data in the table is information about my dad's medications. I
would like to have reference charts of how to identify the strength of
each tablet by its color and markings. I got the info from the
manufacturers' websites and entered it into tables in Word, which I
would like to copy into a more comprehensive file I am creating in
Excel. The first column of each table is the strength of the tablet,
entered as 1 mg., 2 mg., etc. The subsequent columns describe the
shape, color, and markings. There are 3 tables, each with about 4-5
rows.
Is there a way to copy each one - whether as a table or as text - into
a single Excel cell without losing data?
Many thanks.
worksheet. The first column of the table is a list of numbers. I tried
converting the table into text with manual line breaks and tab stops to
divide columns and rows, but that didn't solve my problem.
Excel pastes the data into several rows. When I try to merge them, I
get a warning that the selection contains multiple data values, and
merging into one cell keeps the upper-left most data only.
What I tried that didn't work:
* Formatting the Excel cells as text before pasting the data.
* The various options for "Paste Special." The closest I got was
inserting the table as a Document Object, which could be a workaround,
I guess.
What I am saving for when all else fails:
* The obvious solution of copying row by row into one Excel cell.
The data in the table is information about my dad's medications. I
would like to have reference charts of how to identify the strength of
each tablet by its color and markings. I got the info from the
manufacturers' websites and entered it into tables in Word, which I
would like to copy into a more comprehensive file I am creating in
Excel. The first column of each table is the strength of the tablet,
entered as 1 mg., 2 mg., etc. The subsequent columns describe the
shape, color, and markings. There are 3 tables, each with about 4-5
rows.
Is there a way to copy each one - whether as a table or as text - into
a single Excel cell without losing data?
Many thanks.
Is it possible to set multiple validation for a single cell in excel? Its
pretty straight forward to set a single validation so that a message is
displayed when incorrect data is entered. However, adding another validation
seems to delete the old one. Thanks in advance.
pretty straight forward to set a single validation so that a message is
displayed when incorrect data is entered. However, adding another validation
seems to delete the old one. Thanks in advance.
Great tip! But one thing: On my machine (Excel 2008 Mac), the values in the formula cell are not correctly calculated simply by dragging. Instead, the values are equal to the cell above (the first entry formula value). To get the correct value, I need to click in the formula bar and then hit enter. (I only discovered this after an hour of tinkering, figuring I had botched the formula!)
Are there any ways around this so that it updates upon dragging the formula?
Are there any ways around this so that it updates upon dragging the formula?
Hi guys,
would really appreciate anyones help with this.
I have a column full of text-formatted fractions...
4/5
6/4
3/1
2/5
4/5
etc, etc.....the column is very long!!
I need to convert these to actual fractions...ones I can add to equations, allowing me to multiply and add.
If I highlight the column and goto "format Cells" and change to fraction, the values still stay in the left of the cell.....its only when I manually click on each individual cell, then tick the little green tick, does the cell validate, and the value in the cell moves to the right (and is therefore a proper value).....problem is I have to keep doing this for each individual cell.....and I have 70000+ cells in this column!
Any suggestions on how I could speed this up?
thanks
would really appreciate anyones help with this.
I have a column full of text-formatted fractions...
4/5
6/4
3/1
2/5
4/5
etc, etc.....the column is very long!!
I need to convert these to actual fractions...ones I can add to equations, allowing me to multiply and add.
If I highlight the column and goto "format Cells" and change to fraction, the values still stay in the left of the cell.....its only when I manually click on each individual cell, then tick the little green tick, does the cell validate, and the value in the cell moves to the right (and is therefore a proper value).....problem is I have to keep doing this for each individual cell.....and I have 70000+ cells in this column!
Any suggestions on how I could speed this up?
thanks
Column 1 has roughly 20 rows of information. Cell C1 has the formula =A1.
Is there a formula so that when I drag C1 horizontally into D1, E1, F1, ..., the values placed in each cell will be =A2, =A3, =A4, ...
I do not want to transpose the values from column 1 into C1, D1,.... I want these cells to have a formula that links them up to column 1's values
Thanks
Is there a formula so that when I drag C1 horizontally into D1, E1, F1, ..., the values placed in each cell will be =A2, =A3, =A4, ...
I do not want to transpose the values from column 1 into C1, D1,.... I want these cells to have a formula that links them up to column 1's values
Thanks
Hi, can anyone help me with the below...
Im looking for a vlookup formula which will give me the maximum number from a list which contains multiple matches, i.e.
Lookup number 1 from column A, then give me the largest number from column B
example table:
A B
-----
1 5
2 2
1 11
3 2
4 5
the result would be 11
thanks all!
Im looking for a vlookup formula which will give me the maximum number from a list which contains multiple matches, i.e.
Lookup number 1 from column A, then give me the largest number from column B
example table:
A B
-----
1 5
2 2
1 11
3 2
4 5
the result would be 11
thanks all!
Is it possible to have numbers added to the same cell and have excel continue
to calculate the addition for me in that same cell......ex: I have the number
8 in cell d2 and I want to add the number 8 to that cell and have excel add
the 8 to the previous 8 for a total of 16 in the same cell.....the next time
I would add 5, and the total would be 21? Can this be done in a single cell?
to calculate the addition for me in that same cell......ex: I have the number
8 in cell d2 and I want to add the number 8 to that cell and have excel add
the 8 to the previous 8 for a total of 16 in the same cell.....the next time
I would add 5, and the total would be 21? Can this be done in a single cell?
So I've got some data, which has the approximate form of a sine function. I want to find all the x-axis intercepts. I tried using the intercept function and swapping around the y values for the x values, but it only returns 1 value (so I'd guess it uses a linear regression to estimate a single line through the axis).
I was thinking of trying a nested if/and statement but I haven't quite figured out how to do it. Basically I want to identify the two values where it switches from positive to negative and also indentify the values where it goes negative to positive, I can then fit a straight line between them to find a better approximation of the intercept (though it might not be necessary). Preferably I'd like it all one function as I'm not doing it in VBA (I might do later though, we'll see).
Can anyone suggest how I'd find these value or the x-intercept. Any help would be greatly appreciated.
I was thinking of trying a nested if/and statement but I haven't quite figured out how to do it. Basically I want to identify the two values where it switches from positive to negative and also indentify the values where it goes negative to positive, I can then fit a straight line between them to find a better approximation of the intercept (though it might not be necessary). Preferably I'd like it all one function as I'm not doing it in VBA (I might do later though, we'll see).
Can anyone suggest how I'd find these value or the x-intercept. Any help would be greatly appreciated.
Today I ran into an odd problem. I typed in values for column A rows 1 through 10 then values for column B rows 1 through 10. then in column C, I made the formula C1=A1/B1. The math was correct it showed 542 in the C1 cell. So I dragged that formula down and it showed 542 in all column C cells which is not correct. And when I went to check to see if the formula was correctly dragged it was. For instance, the formula in C2 is =A2/B2 however the value of that cell showed 542 which was not the correct math/value.
But it gets even more weird. When I click on the Column C cells and then it shows the formula up top in the formula bar and if I put my cursor anywhere in the formula bar and hit Return the formula does not change however the correct value then appears in the Column C cell. It is like the act of putting the cursor in the formula activates it to work properly but until it is activated that C cell shows the value of the cell which it was dragged down from.
This is quite bizarre. Has anyone ever seen this before? I have no idea what is going on. I ran a scan for viruses and none were found. I tried it on several new/different spreadsheets but it keeps happening.
Thanks for any tips on this.
But it gets even more weird. When I click on the Column C cells and then it shows the formula up top in the formula bar and if I put my cursor anywhere in the formula bar and hit Return the formula does not change however the correct value then appears in the Column C cell. It is like the act of putting the cursor in the formula activates it to work properly but until it is activated that C cell shows the value of the cell which it was dragged down from.
This is quite bizarre. Has anyone ever seen this before? I have no idea what is going on. I ran a scan for viruses and none were found. I tried it on several new/different spreadsheets but it keeps happening.
Thanks for any tips on this.
This is probably an easy question for most of you, but it's killing me. I tried searching before I posted this, but the suggestions given didn't seem to work for me.
I need to look up data from a cell on one Excel sheet, compare it to a list on a 2nd sheet and when they equal, take a value from a different column on the 2nd sheet and drop it back on the 1st sheet. Since that's a horrible explanation, let me try explaining it this way:
Sheet 1
Column A has a long list of code type 1s
Column E has a long list of code type 2s
Sheet 2
Cell C2 has code 1
Cell E2 needs code 2
I know it should take an index/match function, but nothing I try is working. What I'm trying is the following formula in Cell E2 of sheet 2:
=INDEX('Sheet 1'!A:A,MATCH(C2,'Sheet 1"!E:E,0),5)
But all I get is no result. What's driving me bonkers is that if I copy everything over to a single sheet, that formula works fine.
I need to look up data from a cell on one Excel sheet, compare it to a list on a 2nd sheet and when they equal, take a value from a different column on the 2nd sheet and drop it back on the 1st sheet. Since that's a horrible explanation, let me try explaining it this way:
Sheet 1
Column A has a long list of code type 1s
Column E has a long list of code type 2s
Sheet 2
Cell C2 has code 1
Cell E2 needs code 2
I know it should take an index/match function, but nothing I try is working. What I'm trying is the following formula in Cell E2 of sheet 2:
=INDEX('Sheet 1'!A:A,MATCH(C2,'Sheet 1"!E:E,0),5)
But all I get is no result. What's driving me bonkers is that if I copy everything over to a single sheet, that formula works fine.
Hi,
Try this...
There are some valid datas in the cells A2 (Eg. 100), B2(Eg. 200), C2 and D2.
Data validation is used in cell K2 to limit it to a set of values.
Can we implement this formula?
IF(K2="Approved")
{
A2=A3; B2=B3; C2=C3; D2=D3; K2=K3;
}
ELSE
{
no change to any values.
}
Thanks in advance...
Try this...
There are some valid datas in the cells A2 (Eg. 100), B2(Eg. 200), C2 and D2.
Data validation is used in cell K2 to limit it to a set of values.
Can we implement this formula?
IF(K2="Approved")
{
A2=A3; B2=B3; C2=C3; D2=D3; K2=K3;
}
ELSE
{
no change to any values.
}
Thanks in advance...
Hey
I have three columns containing last name values from 3 different sources that I've brought into one sheet. I am trying to find a way to compare all three values to establish if they are the same.
Of the three values there is no master, Each value may be different. So essentially it would be like doing =IF(a1=a2=a3,"match", "nomatch")
But of course this isn't possible.
I don't care about obtaining detail about which value matches which. I just need true or false response as to whether all three values are the same or not.
Thanks for any help anyone can provide.
Aaz
I have three columns containing last name values from 3 different sources that I've brought into one sheet. I am trying to find a way to compare all three values to establish if they are the same.
Of the three values there is no master, Each value may be different. So essentially it would be like doing =IF(a1=a2=a3,"match", "nomatch")
But of course this isn't possible.
I don't care about obtaining detail about which value matches which. I just need true or false response as to whether all three values are the same or not.
Thanks for any help anyone can provide.
Aaz
I have workbook in which I want to save a specific worksheet to a new file with only the values saved - all data in this worksheet are references to cells on another worksheet, which is using VLOOKUP to pull data from a database.
Found the following code and it gets me close, but it copies the cell references, not the values. It also allows me to specify the file name from a cell reference.
I want the new workbook file to simply be saved, not opened, and a message box to display stating where the file was saved (will always be in the same location on the LAN).
What modifications do I make to this to get this to work per above requirements?
Sub CopyMe()
Dim SaveMeAs As String
SaveMeAs = Sheets("Sheet1").Range("B2").Text
Sheets("Sheet3").Copy
ActiveWorkbook.SaveAs Filename:="C:\My Documents\" & SaveMeAs
End Sub
Found the following code and it gets me close, but it copies the cell references, not the values. It also allows me to specify the file name from a cell reference.
I want the new workbook file to simply be saved, not opened, and a message box to display stating where the file was saved (will always be in the same location on the LAN).
What modifications do I make to this to get this to work per above requirements?
Sub CopyMe()
Dim SaveMeAs As String
SaveMeAs = Sheets("Sheet1").Range("B2").Text
Sheets("Sheet3").Copy
ActiveWorkbook.SaveAs Filename:="C:\My Documents\" & SaveMeAs
End Sub
Hello everyone, I am new to this forum and have been using excel for about 3 years. I have learned alot but still can not figure out how to make numbers add up in one box like a running total. Meaning, If I have a list and in the list is one cell for each item say like cell a1 is for a can of coke and cell a2 is for a car tire and so on,and i want to keep a running total by adding a number to cell a1 or a2 like say "3 i.e. 3 tires or cans of coke" and later that day i come back and need to add 2 more ......so i want to be able to just click on the cell a1 or a2 and enter the number 2 and the cell would add the number in it to the number im adding to it to show a result of 5 tires or whatever. I am sorry If i am not asking the question in an understandable manor but its the best way I can think to ask it.lol anyways, any help would be appreciated, Thanks in advance.
James
James
Is it possible to import a single text file into Excel, splitting the incoming data across multiple worksheets rather than a single worksheet? Each each row on the text file would be evaluated by the value in one of it's "columns" and written to the appropriate worksheet. The file is "!" delimited and has 11 columns for each row.
Currently, I import the file into one worksheet and cut/paste the rows manually into new worksheets/tabs. The files are very large, sometimes exceeding the 65,536 row limit, which I could avoid if the data was split out coming in.
Any help anyone could provide would be WONDERFUL. Thanks!
Currently, I import the file into one worksheet and cut/paste the rows manually into new worksheets/tabs. The files are very large, sometimes exceeding the 65,536 row limit, which I could avoid if the data was split out coming in.
Any help anyone could provide would be WONDERFUL. Thanks!
Entering time values in custom format [h]:mm:ss
Cells accept hours over 23,
Adding cells in column returns correct total time.
Have not found a way to multiply these cells by a $ hourly rate.
So use HOUR(cell ref) and MINUTE(cell ref) to capture values in referenced
cell - then use these values to calculate total payment for $rate per hour.
However, the HOUR(cell ref) formula returns the hours in excess of 24 when
the cell contains an hour value in excess of 23 (ie 27 hours returns 3).
Cells accept hours over 23,
Adding cells in column returns correct total time.
Have not found a way to multiply these cells by a $ hourly rate.
So use HOUR(cell ref) and MINUTE(cell ref) to capture values in referenced
cell - then use these values to calculate total payment for $rate per hour.
However, the HOUR(cell ref) formula returns the hours in excess of 24 when
the cell contains an hour value in excess of 23 (ie 27 hours returns 3).
Hi-
I am brand new to Mr. Excel and would love some advice.
I searched the boards pretty extensively but could not find what I am looking for...I apologize if this is a duplicate.
I am using Excel 2007
How do you automatically add rows and update values for cells to a linked worksheet in which rows have been added? For example: Sheet 1, columns A & B are linked to Sheet 2, columns A & B. Sheet 2 has values in A1:A5 & B1:B5 and Sheet 1, since it is linked, has the same info. I want to add a row in between 3 & 4 on Sheet 2 and want Sheet 1 to automatically add the same row and update the value of the cell in column A & B.
Any help is greatly appreciated!
John
I am brand new to Mr. Excel and would love some advice.
I searched the boards pretty extensively but could not find what I am looking for...I apologize if this is a duplicate.
I am using Excel 2007
How do you automatically add rows and update values for cells to a linked worksheet in which rows have been added? For example: Sheet 1, columns A & B are linked to Sheet 2, columns A & B. Sheet 2 has values in A1:A5 & B1:B5 and Sheet 1, since it is linked, has the same info. I want to add a row in between 3 & 4 on Sheet 2 and want Sheet 1 to automatically add the same row and update the value of the cell in column A & B.
Any help is greatly appreciated!
John
I am trying to write a formula that uses both an if statement and a vlookup statement.
It's for a house cleaning price list, with two sets of prices. I want the formula to say if the value in E7 is R, i want to lookup the value for the house in the second column. If the value in the cell is anything else, i want to lookup the value for the house in the third column.
So in sense, my formula should look like =IF (E7=1,"=VLOOKUP(A10,'Clean Prices'!$A$2:$C$58,2,FALSE)","=VLOOKUP(A10,'Clean Prices'!$A$2:$C$58,3,FALSE)")
But it doesn't work. Is it possible to nest a vlookup in an if statement?
It's for a house cleaning price list, with two sets of prices. I want the formula to say if the value in E7 is R, i want to lookup the value for the house in the second column. If the value in the cell is anything else, i want to lookup the value for the house in the third column.
So in sense, my formula should look like =IF (E7=1,"=VLOOKUP(A10,'Clean Prices'!$A$2:$C$58,2,FALSE)","=VLOOKUP(A10,'Clean Prices'!$A$2:$C$58,3,FALSE)")
But it doesn't work. Is it possible to nest a vlookup in an if statement?
Hi all,
I have several accumulated values from other spreadsheets on my spreadsheet and I'm combining and organizing them on mine. However, the cell alignment isn't working properly as you can see in the picture below.
Now, I can certainly retype these values and align them and they'll align all nice and neat; however, I have a huge Column and retyping that column would take an inordinate amount of time.
I searched earlier on cell alignment and couldn't find anything. Any help is appreciated.
Sincerely,
Bill
I have several accumulated values from other spreadsheets on my spreadsheet and I'm combining and organizing them on mine. However, the cell alignment isn't working properly as you can see in the picture below.
Now, I can certainly retype these values and align them and they'll align all nice and neat; however, I have a huge Column and retyping that column would take an inordinate amount of time.
I searched earlier on cell alignment and couldn't find anything. Any help is appreciated.
Sincerely,
Bill