Excel VBA Course
Excel VBA Course - From Beginner to Expert

200+ Video Lessons
50+ Hours of Video
200+ Excel Guides

Become a master of VBA and Macros in Excel and learn how to automate all of your tasks in Excel with this online course. (No VBA experience required.)

View Course

(80% Discount Ends Soon!)

Close Window (X)   
Excel VBA Course
[80% Discount] Excel VBA Course - From Beginner to Expert

200+ Video Lessons
50+ Hours of Video
200+ Excel Guides

Become a master of VBA and Macros in Excel and learn how to automate all of your tasks in Excel with this online course. (No VBA experience required.)

View Course

(80% Discount Ends Today!)

Conditional Formatting If Any Of Multiple Text In Cell Itself

For multiple cells in a fairly large spreadsheet, I would like to use conditional formatting (e.g. apply a red highlighted background) if the cell itself is equal to any of about 20 potential words (examples of these words are "unknown" or "N/A" or "not computed" or "score not calculated" or "Not reported", etc.). I would want the conditional statement to say something like, "If cell is equal to = "unknown" or "N/A" or "not computed" or "not reported" then turn cell red.

This is a data entry page that my data entry staff will be entering data into based on preset dropdown lists that I've already set. I just want to the file to automatically highlight in red the cells in which my data entry staff entered the specific words listed above, so that I can quickly scan the document and discuss the "red" cells with my data entry staff.


Excel VBA Course
Excel VBA Course - From Beginner to Expert

200+ Video Lessons 50+ Hours of Instruction 200+ Excel Guides

Become a master of VBA and Macros in Excel and learn how to automate all of your tasks in Excel with this online course. (No VBA experience required.)

(80% Discount Ends Soon!)

View Course




Similar Topics







Hello,

I am new to using Excel and I am not very computer literate. I am looking for some help with a spreadsheet I am making. Here is the problem:

I have a column of 14 numbers in cells A1 to A14. If all of these values are less than 2%, I would like a "Pass" to display in cell B1. If any of these values are greater than 2% I would like a "Fail" to display in cell B1.

I have got a formula that works for a single cell but I can't figure out how to get it to apply to more than one cell. For example, I have entered =IF(A1<2,"Pass","Fail") in cell B1. Now if the value I enter in A1 is less than 2, it shows a "Pass", and if the value in A1 is greater than 2 it shows a "Fail" in cell B1. How can I get this to apply to all of the cells from A1 to A14?

If somebody could help me out that would be great.

Thanks,
Randy


Hi everyone, this is my first post here. I consider myself a more advanced Excel user and can navigate my way around fairly well. I've written a spreadsheet and am wondering if there is a way to permit data entry in a cell, contingent upon another cell being populated.

In simple terms, you can't enter data in cell X, until cell "Y" has been populated with something.

Can anyone help with this, because I can't figure it out....


I often use if statements to return empty cells, for example:

=IF(a1=0,"ERROR","")

The trailing "" returns an empty cell. The problem is, it is not TRULY empty. If I fill that formula down, I cannot, for example, jump from one "ERROR" cell to the next by hitting Ctrl arrow-down because it seems to think that these empty cells have contents.

Is there a way to designate, in such a formula as above, to return a TRULY empty cell?

Thanks


I have cells in a column, some colored yellow, some not. I am trying to use
the SUMIF function to sum only the cells in the range that are colored. Can
this be done? Can I enter something in the "criteria" part of the formula
that can do this?

=SUMIF(D3:D13,"criteria",D3:D13)

I also tried to use the CELL function's color feature, but I couldn't get it
to work right. I don't know how to get Excel to recognize if a cell is
colored in a formula.
=CELL("color",cell)

It might just be that I don't know what this means in Help:

"color" --> 1 if the cell is formatted in color for negative values;
otherwise returns 0 (zero).

Can anyone help?



Hi all -

Im very familiar with how to write a macro to automatically autofilter a list based upon a Cell Value (i.e. Range =(A1)...etc.).... but what I cannot figure out how to correctly write is a way to have Excel automatically autofilter a list for any row that CONTAINS the Cell Value, instead of just the exact value.

Cell Value = "birds"
Example -- I need to filter every row so that I see every row that CONTAINS "birds" in the character-string, not just the row that = "birds".

a) is this possible?

If not, I'd like to know also so I can stop attempting to guess (-;
Thanks!!!

Matt

I'm trying to come up with a solution to calculate the man hours and days worked over multiple sheets.

I have a file that has 8 sheets. the first seven sheets are the days of the week and the 8th sheet is where I want to calculate the hours.

The days of the week consists of "Name" "Date" Hours"

The 8th sheet consists of "Name", "Days of the week in their own column (7 columns in total)", "Total Hours" and "Total Days Worked"

Now... each day is always a different group and what I'm hoping for is to create a formula that can grab each name with their hours and throw them into the 8th sheet. So when the end of the week is done I have all the Employees weekly hours and days worked all finished.

I hope this makes sense. This file is to track about 100 employees that are on a rotational work schedule.

I have attached a sample file.

Thanks in advance for your help.


How do I get the colors to change automatically when I use a drop down list.
Per say here is what I am trying to do

If a certain "word" is used from the drop down list I want the background of
that cell to change its color to "green." And if later I change the "word" to
another from the drop down list, it will change it's color to a specified
color.

The drop down list that I use was created from cells that have the colors
already in the "word", but I do not know how to make the list show the colors
so it puts the word & color automatically in the drop down list to the cell
with the drop down (if that makes any sense).

If there is a way, please spell it out simple enough for me to understand,
as I don't know fully the capabilities of formulas or vba.



Is it possible to apply a filter to multiple sheets within the same Excel workbook, using the same filter criteria?

For example, suppose you have tables of data on 3 different tabs, all having the same headings. Suppose one of the headings is "gender". If you apply a filter to the table on Sheet 1, to only show the rows containing the word "female", is it possible to have the tables on Sheets 2 and 3 automatically update to only show the "female" rows? Or would you have to manually update the filter criteria in Sheets 2 and 3?

I hope this makes sense. Thank you in advance for any help.


is it possible to put two formulasinto one cell?

On the attached timesheet there are columns IN, OUT, IN,OUT
The lunch time is worked out by deducting 'C8 from C9' and this works fine when all 'IN, OUT' cells are filled in but for some reason when just the first two cells are filled in it gives a -12 hour answer.

looking at cell 'C11 ' in the attached worksheet, I currently have the formula
=IF(C13=0,","SUM(C9-C8)) The reason for this is to make it look tidy by having blank cells until a calculation is needed,, My problem is, If someone just comes in for the morning one day for instance 8am to 12 noon then they won't have lunch, but C11 will show -12:00
Can I put another formula into C11 to tell it not to deduct C8 from C9 until a time is put into C9.
The following is the sort of thing (many variations) I have been trying but because I'm hopeless at formulas I'm not having any success
Thanks

=IF(C13=0,","SUM(C9-C8))OR,IF(C9,ISBLANK,"",SUM(C9-C8)


I know that you can do PASTE > VALUES in order to keep your conditional formatting on an existing sheet, but sadly the people in my office are prone to not understanding this ("It's a bit technical") and so they just pasting blocks of text from elsewhere and lose it all.....

Does anyone have any suggestions about how to maintain the formatting when people just do a traditional C&P ?

Thanks


Hi, this is something so simple that I have forgotten how to do it.
I want F3 to turn yellow if someone selects "Yes" from a drop down list in cell E3, then F3 has no fill once data is entered into it. And F3 turns Black if E3= no selected from the list. Or F3 turns red if E3 contains "TBC"

so in summary,

if E3="Yes", then F3 conditional format to Yellow until data is entered in it.
if E3="No", then F3 conditional format to Black
if E3="TBC", then E3 & F3 conditional format to Red until E3 is changed to
"Yes" or "No" at a later time.

Thanks in Advance for the help

Mutley13


I have searched and read all the help files. I find the properties of
an object, I see how I can "lock", "size and move with cells" or "not
move with cells". No matter what I select, the object moves off the
screen, when the user, scrolls to the right of the spreadsheet.

Is there a way to lock the position, let's say , in the upper right
corner and have it stay there?

This would be quite useful for an EXIT button, that I have created,
that will close the program without saving (it's a read-only file.)

Thanks to all the wonderful people here that have been so helpful and
give us their valuable insight and time.

Jo




In Excel there is a difference between cells that are blank (= "") and that are empty. You can make blank cells empty by selecting them and pressing the delete key, but I need a fast way to do this on all blank cells in a large worksheet. The only way I have found is with a VBA macro that loops through every cell, tests for '.Value = "" ' and then uses the '.Clear()' function, but doing this on 30 columns x 10000 rows is far too slow. Any solutions?

(The reason I need to do this is for importing into Access, the database treats empty cells as NULL which is what I want. Blank (but not empty) cells screw the import process up.)


How do I set the formula if

if F1...I1 <10 = Pass, >=10 Fail (and highlighted red), and any cell between F1....I1 is empty = blank


Hello, what I would like to do is take a portion of a sheet..... So the cells I want to mirror are in the proposal sheet cells B32 x F51. And then mirror the exact duplicate copy to another sheet. The other sheet should have those same values at A20 X G39. What I am trying to do is have a sheet that has skus, prices, and so forth and then when I add,delete, merge, color, or do anything to the cell on the "proposal creation" sheet I want it to mirror only a specific cells to another sheet that is "salesman copy" that we will print to clients. So this way ont he proposal copy a salesman can insert rows or even change the color of the cells and then have it mirror exactly the same on the "salesman copy" which is what we will print for clients. Thank you.

Hi,

Im working with a large data spreadsheet that has Yes and No answers in different columns. There are blanks within the selection too.
I need to calculate only the Yes.
I have tried using the filters in the Pivot Table field list and they are not working.
So now i'm trying to add a COUNTIF formula in the Calculated Fields section.
The formula I'm using is =Countif('Time limit extension'="yes") and i get the answer "too few."
What should I be using in the formula to get the calculated field to work? I have search the whole forum and I haven't found an answer that can help me.

Please HELP!!!


I get the error message "reference is not valid" each time I open my spreadsheet. I get this message three times, and once I am done clicking ok on all three of them, my spreadsheet works just fine. The problem is, I have to send it to a bunch people.

I have a sheet with raw data a sheet with pivot tables a sheet with a dashboard and a simple macro
I don't have any #REF cells either.

Someone has any idea of what could be the problem?

thanks

NA


I have been using Excel (XP) to make a text chart for several months. Some of
my text entries are rather lengthy. The past two weeks these lengthy entries
are showing up as pound signs (#########) when I click off the cell. I know
the text will fit in the cell, and the problem isn't solved by making the
cell bigger or using a little bit less text. I have the cells formatted as
"text" and "wrap to fit". I have printed the pages and the printed version
also has pound signs. I just want my text to show up!



Hey

I have three columns containing last name values from 3 different sources that I've brought into one sheet. I am trying to find a way to compare all three values to establish if they are the same.

Of the three values there is no master, Each value may be different. So essentially it would be like doing =IF(a1=a2=a3,"match", "nomatch")
But of course this isn't possible.

I don't care about obtaining detail about which value matches which. I just need true or false response as to whether all three values are the same or not.

Thanks for any help anyone can provide.

Aaz


I run a small business. I want to start keeping track of inventory using a barcode system.

I know Excel "ok", but I don't know programming.'

I'd like to be able to do something very simple (for now)...

For example...if I had PRODUCT / CODE / INV VALUE

A - CODE A - 5
B - CODE B - 11
C - CODE C - 14

I would want to be able to click a button (or scan a code for) : ADD +1 or REMOVE -1

...then scan the barcode on the product (A) and have it add or remove one, respectively. So, if the row for A is:

A - CODE A - 5

I choose "ADD" (with a button or scan code), then scan the barcode, and the spreadsheet automatically finds the code in the sheet, and changes the corresponding inventory value:

A - CODE A - 6

Does that make sense? How might I go about doing that?