Clubbing Data From Multiple Columns Into One |
Clubbing Data From Multiple Columns Into One - Excel |
|
Hi,
I'm currently creating a PivotTable chart, with multiple columns of data. Here's an example of the data column names.
14.1, 14.2, 14.3, 15.5, 15.6, 17.1, 17.2, and so on.
What I'd really like to show is just 3 columns: 14, 15 and 17. However, within each column, I'd like to break out the value of the smaller pieces. So, if 14.1 had a value of 2, 14.2 had a value of 5, and 14.3 had a value of 4, column 14 should now have a value of 11 (2 + 5 + 4). However, I'd like to delineate each of those 3 values within that column. Can that be done?
Thanks,
Mike
PS I've attached a spreadsheet that should hopefully illustrate the problem.
I'm currently creating a PivotTable chart, with multiple columns of data. Here's an example of the data column names.
14.1, 14.2, 14.3, 15.5, 15.6, 17.1, 17.2, and so on.
What I'd really like to show is just 3 columns: 14, 15 and 17. However, within each column, I'd like to break out the value of the smaller pieces. So, if 14.1 had a value of 2, 14.2 had a value of 5, and 14.3 had a value of 4, column 14 should now have a value of 11 (2 + 5 + 4). However, I'd like to delineate each of those 3 values within that column. Can that be done?
Thanks,
Mike
PS I've attached a spreadsheet that should hopefully illustrate the problem.
Excel VBA Course - From Beginner to Expert
200+ Video Lessons 50+ Hours of Instruction 200+ Excel Guides
Become a master of VBA and Macros in Excel and learn how to automate all of your tasks in Excel with this online course. (No VBA experience required.)
(80% Discount Ends Soon!)
Similar Topics
I have a spreadsheet with thousands of columns. Due to poor planning on my part I need to insert a column between each existing column (e.g. I need to insert a column between the existing columns A and B, B and C, etc...). I would rather not have to do this manually thousands of times. Is there an easy way to do this?
Thanks in advance.
Thanks in advance.
I'm attempting to filter columns E, G, and I all at the same time. I need to
display rows that have values greater than 0 in any one of those three
columns. So far I can only filter progressively. If I filter column E and
then filter column G, the second filter is only applied to the results of the
first filter.
Does anybody know if it's even possible to do what I'm trying to do?
display rows that have values greater than 0 in any one of those three
columns. So far I can only filter progressively. If I filter column E and
then filter column G, the second filter is only applied to the results of the
first filter.
Does anybody know if it's even possible to do what I'm trying to do?
I am setting up a PivotTable and only want to show the actual raw data values in the PivotTable field and NOT any sum, count, average, max, min, etc etc.
How can I do this? I only seem to have the options for sums, counts, etc. There are no options for just presenting the data.
So for example, rather than a PivotTable that results in counts of 1, 1, 1 in each cell, I want it to show Compay1, Company2, Company3, etc.
How can I do this? I only seem to have the options for sums, counts, etc. There are no options for just presenting the data.
So for example, rather than a PivotTable that results in counts of 1, 1, 1 in each cell, I want it to show Compay1, Company2, Company3, etc.
I would like to copy a small table from Word into one cell in an Excel
worksheet. The first column of the table is a list of numbers. I tried
converting the table into text with manual line breaks and tab stops to
divide columns and rows, but that didn't solve my problem.
Excel pastes the data into several rows. When I try to merge them, I
get a warning that the selection contains multiple data values, and
merging into one cell keeps the upper-left most data only.
What I tried that didn't work:
* Formatting the Excel cells as text before pasting the data.
* The various options for "Paste Special." The closest I got was
inserting the table as a Document Object, which could be a workaround,
I guess.
What I am saving for when all else fails:
* The obvious solution of copying row by row into one Excel cell.
The data in the table is information about my dad's medications. I
would like to have reference charts of how to identify the strength of
each tablet by its color and markings. I got the info from the
manufacturers' websites and entered it into tables in Word, which I
would like to copy into a more comprehensive file I am creating in
Excel. The first column of each table is the strength of the tablet,
entered as 1 mg., 2 mg., etc. The subsequent columns describe the
shape, color, and markings. There are 3 tables, each with about 4-5
rows.
Is there a way to copy each one - whether as a table or as text - into
a single Excel cell without losing data?
Many thanks.
worksheet. The first column of the table is a list of numbers. I tried
converting the table into text with manual line breaks and tab stops to
divide columns and rows, but that didn't solve my problem.
Excel pastes the data into several rows. When I try to merge them, I
get a warning that the selection contains multiple data values, and
merging into one cell keeps the upper-left most data only.
What I tried that didn't work:
* Formatting the Excel cells as text before pasting the data.
* The various options for "Paste Special." The closest I got was
inserting the table as a Document Object, which could be a workaround,
I guess.
What I am saving for when all else fails:
* The obvious solution of copying row by row into one Excel cell.
The data in the table is information about my dad's medications. I
would like to have reference charts of how to identify the strength of
each tablet by its color and markings. I got the info from the
manufacturers' websites and entered it into tables in Word, which I
would like to copy into a more comprehensive file I am creating in
Excel. The first column of each table is the strength of the tablet,
entered as 1 mg., 2 mg., etc. The subsequent columns describe the
shape, color, and markings. There are 3 tables, each with about 4-5
rows.
Is there a way to copy each one - whether as a table or as text - into
a single Excel cell without losing data?
Many thanks.
Hi,
I made a budget with many narrow columns and have turned the data into a table. I will only ever filter the data with the left-hand most column. However, all the other columns are filled each with the grey drop-down filter arrow button, and I can no longer see the headings of these columns and frankly seeing 50 little unused arrow buttons is rather ugly. Is there any way to simply remove the filter drop-down buttons on some columns or even all of them, just leaving a filter button at the heading of the first column? I know I can hide the headings, but then I lose sight of the first filter arrow that I use.
Sorry to ask such a bizarre question, but I appreciate your help.
Thanks
I made a budget with many narrow columns and have turned the data into a table. I will only ever filter the data with the left-hand most column. However, all the other columns are filled each with the grey drop-down filter arrow button, and I can no longer see the headings of these columns and frankly seeing 50 little unused arrow buttons is rather ugly. Is there any way to simply remove the filter drop-down buttons on some columns or even all of them, just leaving a filter button at the heading of the first column? I know I can hide the headings, but then I lose sight of the first filter arrow that I use.
Sorry to ask such a bizarre question, but I appreciate your help.
Thanks
This is my first post in these forums.
I am trying to create a formula which will look at the data in columns A - I (50 rows) and copy this data to columns K - S but ignoring any blank cells. Thereby consolidating the data in the upper rows with no spaces.
I am sure there is a relativley simple answer but it is driving me mad!
Hope you "Guru's" can help
Thanks
Added example spreadsheet to aid assistance.
I am trying to create a formula which will look at the data in columns A - I (50 rows) and copy this data to columns K - S but ignoring any blank cells. Thereby consolidating the data in the upper rows with no spaces.
I am sure there is a relativley simple answer but it is driving me mad!
Hope you "Guru's" can help
Thanks
Added example spreadsheet to aid assistance.
I have two columns in my spreadsheet. Column A has no blank fields, Column B has some blank fields. I would like to show the text from Column A in the same row of Column B only when Column B is blank.
So, basically I'm after: If column B has text, do nothing. If column B is blank, then list text from Column A.
Right now I've created Column C with this formula =IF(ISBLANK(B1), A1. That's working to get the text from A1 when B1 is blank. What can I do/add to get it pull the text from B1 if there is text there? Or...is there a better approach altogether?
So, basically I'm after: If column B has text, do nothing. If column B is blank, then list text from Column A.
Right now I've created Column C with this formula =IF(ISBLANK(B1), A1. That's working to get the text from A1 when B1 is blank. What can I do/add to get it pull the text from B1 if there is text there? Or...is there a better approach altogether?
Is it possible to import a single text file into Excel, splitting the incoming data across multiple worksheets rather than a single worksheet? Each each row on the text file would be evaluated by the value in one of it's "columns" and written to the appropriate worksheet. The file is "!" delimited and has 11 columns for each row.
Currently, I import the file into one worksheet and cut/paste the rows manually into new worksheets/tabs. The files are very large, sometimes exceeding the 65,536 row limit, which I could avoid if the data was split out coming in.
Any help anyone could provide would be WONDERFUL. Thanks!
Currently, I import the file into one worksheet and cut/paste the rows manually into new worksheets/tabs. The files are very large, sometimes exceeding the 65,536 row limit, which I could avoid if the data was split out coming in.
Any help anyone could provide would be WONDERFUL. Thanks!
Hello,
I have two columns of data: column A contains the date and time in the form dd/mm/yyyy. Column B contains a number value. All the times are in order, so column A looks like:
01/01/2007
02/01/2007
03/01/2007
I have data from 2007 to 2010. I need to calculate an average daily value (in column B) for each month, and display it in column C. So, for January, I need to calculate the average of 31 days, February, 28 days, etc.
Is there a function I can use to do this? I've been trying the AVERAGEIF formula but can't get it to work. Any ideas would be much appreciated!
Many thanks,
Caitlin
I have two columns of data: column A contains the date and time in the form dd/mm/yyyy. Column B contains a number value. All the times are in order, so column A looks like:
01/01/2007
02/01/2007
03/01/2007
I have data from 2007 to 2010. I need to calculate an average daily value (in column B) for each month, and display it in column C. So, for January, I need to calculate the average of 31 days, February, 28 days, etc.
Is there a function I can use to do this? I've been trying the AVERAGEIF formula but can't get it to work. Any ideas would be much appreciated!
Many thanks,
Caitlin
Hi,
I am entering lots of family history data into a spreadsheet. At the simplest I have columns (in cells A1 B1 C1) the headings, Surname, Forename, Year. Right now, I enter in cells A2 B2 and C2 say: Smith <Tab> John <Tab> 1555 <Enter, move mouse to the A column in the next row down). What I want to happen is when I have entered the last data in a row and pressed <Enter> I move automatically to the A-column in the next row down.
Is this possible?
Regards and a Merry Christmas to all
Wibs
I am entering lots of family history data into a spreadsheet. At the simplest I have columns (in cells A1 B1 C1) the headings, Surname, Forename, Year. Right now, I enter in cells A2 B2 and C2 say: Smith <Tab> John <Tab> 1555 <Enter, move mouse to the A column in the next row down). What I want to happen is when I have entered the last data in a row and pressed <Enter> I move automatically to the A-column in the next row down.
Is this possible?
Regards and a Merry Christmas to all
Wibs
Hi peeps
I want to combine data from several worksheets into one worksheet.
For example, I have data in Sheet1 (Columns A,B,C), data in Sheet2 (Columns A,B,C), data in Sheet3 (Columns A,B,C) all with varying amounts of rows. (All the rows contain text data).
I need to combine all of the data from the 3 sheets into a single sheet, Sheet4 (Columns A,B,C), eliminating the empty rows.
I've been looking into this for a while, and can't find anything that really helps. Anyone got any pointers of what to look into?
Any help will be beautiful.
Cheers
I want to combine data from several worksheets into one worksheet.
For example, I have data in Sheet1 (Columns A,B,C), data in Sheet2 (Columns A,B,C), data in Sheet3 (Columns A,B,C) all with varying amounts of rows. (All the rows contain text data).
I need to combine all of the data from the 3 sheets into a single sheet, Sheet4 (Columns A,B,C), eliminating the empty rows.
I've been looking into this for a while, and can't find anything that really helps. Anyone got any pointers of what to look into?
Any help will be beautiful.
Cheers
I have a formula in cell C1 (=A1/B1). I want to copy this formula down to row C20, however rows A2 to A20 are empty so C2 to C20 show (#DIVO!). Is there something I can put in the formula to make column C be blank until the data is enter into Columns A & B?
Good mornng - I am new to the forum - my name is Jena
My question is this - I have a large spreadsheet with multiple columns of information. I want to sort it by a certain column. I know how to do this. My question is, once I'm done with my work I want to sort it back to the original "sort" but I'm not sure how they have it sorted. I've tried to figure out how they have it sorted but can't. Is there some way to go back to the original sort?
Thank you for your anticipated help.
Jena
My question is this - I have a large spreadsheet with multiple columns of information. I want to sort it by a certain column. I know how to do this. My question is, once I'm done with my work I want to sort it back to the original "sort" but I'm not sure how they have it sorted. I've tried to figure out how they have it sorted but can't. Is there some way to go back to the original sort?
Thank you for your anticipated help.
Jena
How do I sort but have the other data move with the column I'm sorting? Whenever I sort, for example, by name, the address and phone numbers columns stay the same and are therefore incorrect with the newly sorted columns. I've looked everywhere.
Hi,
I'd like help in creating a macro that deletes an entire row that has emtpy cells in col B, C & D in the same row.
So for example if I have empty cells in b3,c3 & d3 I'd like the row deleted.
I've used the code below for just column B but I need to include column C & D as well. I tried putting Columns("B:D") but it deletes everything.
Code:
I'm sure it's something simple... like me !
Any help much appreciated
Wrightie
I'd like help in creating a macro that deletes an entire row that has emtpy cells in col B, C & D in the same row.
So for example if I have empty cells in b3,c3 & d3 I'd like the row deleted.
I've used the code below for just column B but I need to include column C & D as well. I tried putting Columns("B:D") but it deletes everything.
Code:
Sub Step4()
On Error Resume Next
Columns("B:B").SpecialCells(xlCellTypeBlanks).EntireRow.Delete
End Sub
I'm sure it's something simple... like me !
Any help much appreciated
Wrightie
I have an extensive spreadsheet with several columns and all showing borders
where each cell/column begins and ends. However there are a few cells where
the break with the next cell does not show the line.
I have highlighed the cell in question, gone to format/cell/borders and
everything looks fine. Black color + format border shows square with all
sides of square showing.
Any thoughts on how to fix these few random cells.
Thanks
where each cell/column begins and ends. However there are a few cells where
the break with the next cell does not show the line.
I have highlighed the cell in question, gone to format/cell/borders and
everything looks fine. Black color + format border shows square with all
sides of square showing.
Any thoughts on how to fix these few random cells.
Thanks
Hi!
I have a question regarding filtering of columns, hopefully someone is able to put me on the right track. I have set up Excel 2007 so that I can click on the drop-down menu in each column to filter them.
However, in my data set there is one blank row separating two set of rows. Now, when I apply the filter on a column, all the rows above the blank row filter correctly, but all the rows below stay un-filtered.
I guess Excel only looks at the consequtive rows, then stops when it hits a blank row. Is there any way of applying the filter beyond a blank row (i.e. the whole column)?
Any advice is higly appreciated.
I have a question regarding filtering of columns, hopefully someone is able to put me on the right track. I have set up Excel 2007 so that I can click on the drop-down menu in each column to filter them.
However, in my data set there is one blank row separating two set of rows. Now, when I apply the filter on a column, all the rows above the blank row filter correctly, but all the rows below stay un-filtered.
I guess Excel only looks at the consequtive rows, then stops when it hits a blank row. Is there any way of applying the filter beyond a blank row (i.e. the whole column)?
Any advice is higly appreciated.
I'm trying to format a worksheet to show how many days overdue certain tasks are, and running into a couple of issues. The sheet is set up with Due Dates in Column A, Days Overdue in Column B, and Date Completed in Column C. My first thought was just to use as simple a formula as possible in Column B =Today()-A2. This worked alright for tasks that already had Due Dates assigned, but if Column A was blank I'd get a high number in Column B. I also realized that tasks will continue to show as overdue even after I enter the completed-on date in Column C. Is there a relatively simple way to tackle this formula? Thanks in advance for suggestions. (I've attached an example with the column headings I want to use.)
Hi, can anyone help me with the below...
Im looking for a vlookup formula which will give me the maximum number from a list which contains multiple matches, i.e.
Lookup number 1 from column A, then give me the largest number from column B
example table:
A B
-----
1 5
2 2
1 11
3 2
4 5
the result would be 11
thanks all!
Im looking for a vlookup formula which will give me the maximum number from a list which contains multiple matches, i.e.
Lookup number 1 from column A, then give me the largest number from column B
example table:
A B
-----
1 5
2 2
1 11
3 2
4 5
the result would be 11
thanks all!
I am puzzled by a thin black line (that looks like a border line) on a spreadsheet that I am unable to remove, whatever I do. It starts halfway across column B and stops just at the end of column Z.
It is not a border line.
It is not a page break.
If I delete the rows it appears on it remains visible.
It is not an object floating on top of the spreadsheet.
Any ideas?
Thanks.
It is not a border line.
It is not a page break.
If I delete the rows it appears on it remains visible.
It is not an object floating on top of the spreadsheet.
Any ideas?
Thanks.