Vba Editor Word Wrap For .body Text

Using VBA, I am trying to retrieve the contents of the Source of a web page (the same as would appear if you right-clicked on the page and chose "View Source") into a variable so I can work on it in VBA (using InStr, etc.).

The problem is I can use code such as
strHTMLText = ie.Document.body.innerText
or
strHTMLText = ie.Document.body.outerText
to retrieve the code, but in either case only part, not all, of the source code is captured. I need ALL the code. Is there some kind of code such as ie.Document.body.allText or similar that would perform this function?

Much obliged!

I have a large database with names, addresses etc. When I try to make changes
to the email address, like change the font color or change on letter, Excel
tries to email the address. If I click in the formula bar to make the
changes, it automatically changes it back to all blue text and underlined. I
have tried to format all of the cells as "Text" to show as entered, but it
doesnt work. PLEASE HELP

I would like to copy a small table from Word into one cell in an Excel
worksheet. The first column of the table is a list of numbers. I tried
converting the table into text with manual line breaks and tab stops to
divide columns and rows, but that didn't solve my problem.

Excel pastes the data into several rows. When I try to merge them, I
get a warning that the selection contains multiple data values, and
merging into one cell keeps the upper-left most data only.

What I tried that didn't work:
* Formatting the Excel cells as text before pasting the data.
* The various options for "Paste Special." The closest I got was
inserting the table as a Document Object, which could be a workaround,
I guess.
What I am saving for when all else fails:
* The obvious solution of copying row by row into one Excel cell.

The data in the table is information about my dad's medications. I
would like to have reference charts of how to identify the strength of
each tablet by its color and markings. I got the info from the
manufacturers' websites and entered it into tables in Word, which I
would like to copy into a more comprehensive file I am creating in
Excel. The first column of each table is the strength of the tablet,
entered as 1 mg., 2 mg., etc. The subsequent columns describe the
shape, color, and markings. There are 3 tables, each with about 4-5
rows.

Is there a way to copy each one - whether as a table or as text - into
a single Excel cell without losing data?

Many thanks.

I have a userform containing a multicolumn listbox (ListBox1) and textbox (txtSelectedJobNumber).

When a user clicks on a line in the listbox I want to automatically copy the text in the 3rd column of the selected line to the textbox.

If anyone could provide code which would allow me to do this I would be grateful

Thanks

Colin

I saw two threads in this forum that asked this question, with no good answer. I am posting this solution for anybody still struggling with this.

The question:
How can you prevent a cell's contents from overflowing into the next cell?

Of course, you can make the column wider or turn on text wrapping, but you might not want to. Each of those solutions can mess up the layout of your sheet. You may just want to truncate the value.

Some people have suggested putting a space in the next cell. This is unnecessary, a pain in the but, and will mess up any ISBLANK type formulas, among other things.

The solution:
Select the cells in question and turn on text wrapping (Format>Cells>Alignment>Wrap Text).
Now select the row(s) in question and manually set the row height, by right clicking the row number and selecting "Row Height". Check the height of an adjacent row for a good value.

Your cells will now not spill over either horizontally or vertically. They will simply truncate anything that doesn't fit.

Be careful now, because parts of your data may be hidden. This can cause its own set of problems if one or two digits are neatly hidden away. Think ahead if other people might be using this sheet, and not be expecting to have some data hidden.

Tested in Excel 2002

Hi everyone,

I'm going nuts trying to figure out how to autofill text from one cell
to another. For example, everytime I type text into cell A20, I want
the exact same thing to cell BL20. The same for B20, BL20, etc.

How do I go about that? I already know how to copy formulas from one
cell to another by dragging the skinny black line of the cell. I guess
I just need the formula for a simple IDENTICAL copying of text.

Thanks in advance,

Mike

I have the strangest problem... somehow, right clicking a cell doesn't
bring up a menu anymore. It happens only when I'm in Excel only... it still
works even if I bring up macro editor within Excel... it only doesn't work
when I'm in Excel. I've tried Options and Customize... nothing there seems
to work...
HELP!!!

Hi, hope someone can assist, i want to add some arrow syimbols in to a formula, so that when the formula works out it shows an up arrow for higher or a down arrow for lower, i am using this formula at the moment because i dont know any better but it works, putting in the word up or down:

I have entered the following formula in to a cell: =IF(S3<R3,"DOWN","UP") it works however i want to replace the word Down and up with the relevant arrows symbol. How do i do this?

Thanks

Hello ,

Here is my issue:

I have a list of SKUs in Excel and I need to add one same word to 500 cells that have pre-existing text in the cells. See example below:

1) List of SKU's in cells:

34
35
39
55


2) text that needs to be added IN FRONT of every number:

DF

So the result would be:

DF34
DF35
DF39
etc.

How do I do that in a formula and not manually? I found another similar thread and I understand how to do it from the instructions there but the same text goes on the back and the result is: 34DF but I need it to be like: DF34.

I am using Office 2007 for mac.

Thank you for the help,
Chris

I have a graph with various information in it. One is a line graph that tracks hours used in that department per month. The problem is that when it gets to the last month, and there is not yet data for future months, the line goes down to Zero (leavin this big diagonal line that makes the data look funny). I need this line to stop on the last month there is data for. (I do not manually enter the data, it is a formula that I do not wish to delete.) I know I can manually move the data that the line is pulling to make it stop on the last month, but I have a graph for 36 different departments and that's a pain to have to manually adjust 36 graphs each month. Is there a way to tell the line to stop if there is no data? Thanks!!

I am puzzled by a thin black line (that looks like a border line) on a spreadsheet that I am unable to remove, whatever I do. It starts halfway across column B and stops just at the end of column Z.
It is not a border line.
It is not a page break.
If I delete the rows it appears on it remains visible.
It is not an object floating on top of the spreadsheet.
Any ideas?
Thanks.

I need to find data in two different formats within a column

Examples

Webb Christopher


Greer Nancy

I need to find cells with text that have more than one space between the first and last names; and cells with text that have only one space between the first and last names.

I am fairly new to excel. I can find the space after the first word but cannot tell it to find ones that say have a space then another string of text.

Thank you for your help!

Hi,

I have the following code to put data from a VBA userform into Excel

Dim Sh As Worksheet
Dim Rng As Range
Set Sh = ActiveSheet
Set Rng = Sh.Range("A65536").End(xlUp).Offset(1, 0)
With Rng
.Cells(1, 1) = Surname.Text
.Cells(1, 2) = forename.Text
.Cells(1, 3) = datein.Text
.Cells(1, 4) = origin.Text
.Cells(1, 5) = Addressee.Value
.Cells(1, 6) = usual.Value
.Cells(1, 7) = dateto.Text
.Cells(1, 8) = permission.Value
.Cells(1, 9) = dateseen.Text
.Cells(1, 10) = requestview.Value
.Cells(1, 11) = Invoice.Value
.Cells(1, 12) = notes.Text
.Cells(1, 13) = datecompleted.Text
.Cells(1, 14) = holdsend.Value
.Cells(1, 15) = fee.Text
.Cells(1, 16) = notes2.Text
.Cells(1, 17) = dateseen.Text
.Cells(1, 18) = invoicesent.Text
.Cells(1, 19) = Paid.Text
.Cells(1, 20) = Complete.Value

End With

What I want to do next is click on the surname on the speadsheet and call up the userform with the fields complete for that person. I would also like to be able to edit/update the form and update the information on the speadsheet accordingly.

Any help would be greatly appreciated!

Many thanks!

How do I get the colors to change automatically when I use a drop down list.
Per say here is what I am trying to do

If a certain "word" is used from the drop down list I want the background of
that cell to change its color to "green." And if later I change the "word" to
another from the drop down list, it will change it's color to a specified
color.

The drop down list that I use was created from cells that have the colors
already in the "word", but I do not know how to make the list show the colors
so it puts the word & color automatically in the drop down list to the cell
with the drop down (if that makes any sense).

If there is a way, please spell it out simple enough for me to understand,
as I don't know fully the capabilities of formulas or vba.

I have set up an excel file that helps put together different text components using the vlookup and concatenate formulas for use in one plain text document .

When I try to paste the finished result into notepad/textpad/word it adds extra double quote marks throughout the text. Does anyone know how to paste it without these marks?

Thanks!