Runtime Error 1004 When Entering Formula Via Macro

I am trying to sum all numbers <0 using the SUMIF formula in Excel 2003.

FORMULA: =sumif(range,criteria,sum_range)

I got it to work, but I have cell ranges to total that are not next to each
other (such as A5:A15 and C5:C15).
When selecting the ranges for the formula, Excel writes them A5:A15,C5:C15

because of the comma (,) between the cell ranges Excel is reading the A5:A15
as the range and C5:C15 as the critera. How can I get this formula to allow
me to select multiple cell ranges?

All help is appreciated.

Thank you.

I get the error message "reference is not valid" each time I open my spreadsheet. I get this message three times, and once I am done clicking ok on all three of them, my spreadsheet works just fine. The problem is, I have to send it to a bunch people.

I have a sheet with raw data a sheet with pivot tables a sheet with a dashboard and a simple macro
I don't have any #REF cells either.

Someone has any idea of what could be the problem?

thanks

NA

Hi there,

I'm very new to Excel, and I'm having trouble figuring a few things out. Hopefully this will be very easy for you guys!

In Sheet 1, I have a column of cells that I would like to also appear in Sheet 2. If I add a new row to the column in Sheet 1, I would also like it to be updated automatically in Sheet 2. Currently, I can get it to show the contents of individual cells from Sheet 1 in Sheet 2 by using this formula in the formula bar for each cell in Sheet 2:

=Sheet1!A3 (or whichever cell it is)

That's fine, but I'd like to just have a formula that will reproduce the entire column (ie. without a fixed range, as new rows are going to be added to the column).

If anyone could point me in the right direction, I'd be very very grateful. Thanks.

Hi all.

I have set up a workbook that is sent out to lots of different users. They each keep and use their own copy.

I have set it up so that everything looks OK and is visible on MY screen, but I'm conscious that some users may have different screen sizes, different toolbars set up, and so on, which might make some parts not immediately visible to them.

I have set up an auto-execute macro which automatically sets the zoom factor to best fit, for several of the worksheets, and this works fine.
Here's the code that does it.
Code:

Sheets("WELCOME").Select
    Range("A1:N18").Select
    ActiveWindow.Zoom = True

By repeating this code for each worksheet, I can make each one be zoomed just right.

However, the file contains 8 sheets that are all identically laid out, except the number of rows is different.
What I want to do is go to the worksheet that has the largest number of rows (it's always the same worksheet, so I know which one it is), set the zoom factor for THAT worksheet (which I can do, and it always has the same number of rows), and then take THAT zoom factor, whatever it is - and it will vary depending on the user - and apply that to the other worksheets that have a similar layout.

I could just go through each worksheet and zoom it automatically, but that would mean that some of the sheets looked very large, others very small, and I'd like them to have a consistent appearance.
I could also specify a range on each worksheet that was similar to the appropriate range on the longest worksheet, and zoom that automatically, but that's not ideal either, because some of the row heights vary from sheet to sheet, and again I'll end up with different font sizes.

Anyone know how to do this ?

I am looking for assistance in having one cell in a text format equals another cell that contains a time value in hh:mm format.

For example: Cell A1 has a time format (hh:mm) value of 04:00; which is the Start Time. I would like cell D1 to have a text format value of "04:00" (result is dependant upon what is entered in A1). I would duplicate the same formulas to reflect Stop Times in other cells.

My final result is to have another cell (F1) use the Concatenate formula to have the Start and Stop time shown in one cell as "04:00 - 12:30". The times would change based on the Time formated values entered into the Start and Stop time cells.

I have researched this in the board and found many excellent ways to do the opposite, but not convert Time format to Text format. Any assistance is greatly appreciated.

-Shane

I often use if statements to return empty cells, for example:

=IF(a1=0,"ERROR","")

The trailing "" returns an empty cell. The problem is, it is not TRULY empty. If I fill that formula down, I cannot, for example, jump from one "ERROR" cell to the next by hitting Ctrl arrow-down because it seems to think that these empty cells have contents.

Is there a way to designate, in such a formula as above, to return a TRULY empty cell?

Thanks

Hi all,

I've had a long search through your pages to see if this question has been answered before but having browsed through about 50 pages worth of threads I couldn't see anything, but if I am repeating prior information I do apologise.

I've written a macro that is relatively simple. It just takes some information in one format, rearranges it, adds some formatting and performs some calculations. Nothing incredibly fancy but it works fine on my computer.

Now, I need to share this macro with some other people, so basically I've just sent that excel file on to the people that need to use it. Should be fine and in most cases it is, however there is one user who although they can open the file, can't seem to get the macro to run properly.

It seems to get a small way through the macro but then stop with no error messages or any sign that it hasn't completed properly.

I have checked Macro Security level and that is the same as mine, Tools - Add-Ins is the same, In Visual Basic, Tools - References is the same as mine. It is the same Operating system and the same version of Excel.

I have even signed into this person's computer as myself (it's a big company network thing) and tried to run the macro and it works fine, so there is nothing wrong with the hardware.

I've googled and searched and tried everything I can think of but I'm no closer to solving this problem, so if anyone has read through this wall of text and can come up with a possible solution, that would be greatly appreciated to save me from tearing ALL my hair out!

Thanks very much for your time.

Hello

I'm quite experienced Excel user. I've never come across this problem but tinkering in every conceivable way within Excel settings and the solution has eluded me.

I have added a worksheet created elsewhere (it is a form I need printing, with the data coming from 2 sheets I have created from scratch) which has pre formatted cells for Date and Client Name etc.

When I try to reference the cell in this added sheet from my 2 sheets, instead of the result, it always displays the formula, not the result.

I have tried doing it from one of my sheets to reference to this new, and that displays the result and not formula. I can't imagine why it's doing this and I've never seen it happen before.

Formatting cells, giving cells names rather than the usually adequate of reference to the Cell Number doesn't change things. I wonder if I've picked up some legacy protection from the original form but can't see anywhere in the tools etc that's obvious.

There's about 50+ cells that need referencing and I got to get this done for work.

Please help me. This is my first need to post on a Excel Forum as I've always found help or answers from other peeps or internet but this one is making me scratch my head big time.

I have a co-worker's file that he is having trouble with. He is using Excel 2000 SP3. When copying a cell with a formula in it of "=D6+C6" and pasting it into the next cell down, it will display the same value in the cell as the calculated value from above, but has the correct formula displayed in the formula bar of "=D7+C7".

Example:
A1: 50
A2: 10
B1: 60
B2: 20

A3: Formula: =A1+A2 Displays: 60
Right click A3, Copy, right click B3, paste
A3 displays 60

When I click save, it will change the display value to 80.

I am trying this on his workstation and mine. Mine has Office 2010, so I think there might be an issue with the file itself.

Also, not just copy and paste. I can also just click the top cell after filling in the formula and then drag the bottom right of the cell downward and it will do the same of filling in the correct formula, but have the incorrect value.

I know that I could get him to just click save each time before really looking at the results, but that is just a band aid to the problem.

Any ideas how to fix this?

Posted this on the Ozgrid forums, but haven't gotten any help yet, so I thought I'd try here too!

I've been having a strange problem lately. I have a fairly lengthy macro that works perfectly most of the time. Occasionally it will run as expected but as soon as the macro ends, excel becomes unresponsive to mouse-clicks. When I click anywhere (trying to select a cell, or an excel menu item...clicking anywhere in excel) I'll get the a 'ding' system sound and nothing will happen. BUT, if I use the keyboard arrow keys, I can see that the active cell selection moves accordingly. Then it gets really strange - when I have a cell highlighted and press any key to input text, it gets duplicated. So if I press "s' it will input "ss" into the cell, and then when I press enter it will auto-move to the next cell down, but nothing ends up getting saved into the previous cell.

I don't understand what's going on at all. I can't think of anything in my macro that would have these kinds of effects. I've made sure that screenupdating is turned back on at the end of every procedure. If I go into the VBE, I can manually run procedures and they all work fine. The only way I've been able to get back to normal is by force closing excel altogether and re-opening. Any ideas?

______________________

Still having trouble, and the same thing is happening with this workbook on two different computers, so I don't think it's a hardware, or OS specific issue. When it gets locked up like this, I can still do anything in the VBE (edits cells, run macros, etc.) with no problems. If I'm in the excel window, I can click alt on the keyboard and the shortcut keys for the menu come up, but I can't go deeper than that by clicking the letter shortcuts, they do nothing. If I use the delete key to delete the contents of a cell, then it gets deleted. But if I type anything else (numbers, letters, or symbols) then it types 2 instances of the key every time, yet when I hit enter, nothing changes in the cell. I also can't really bring focus to the excel window if something else (ie. the VBE) is on top of it, clicking into the excel window just gives the little system 'ding' sound and nothing happens.

If I hit the save button in the VBE (since I can't click anything in the excel window), then it seems to snap out of it and go back to normal. I tried searching for anything simmilar to this and can't find anything...

Any help would be much appreciated. This is driving me nuts!

I have an excel worksheet that adds two other worksheets in a data
triangle. I copied it to create a new data set and used find &
replace to change the worksheet references to the new ones.

The cells still contain the result of the old formula referring to the
previous worksheets. The only way I can get the formula to return the
correct result is to edit (F2) each cell and press enter. Calc now
(F9) does nothing.

I've seen this before, but this time, I need to calculate many
thousands of cells and don't have time for this workaround.

Any ideas?

Thanks.

Don S

I am using XL2007 and have a macro that refreshes microsoft query connections. The issue is the refreshes only happen if you step through the macro using the debugger. When you run the macro normally, everything else functions properly, but the data is not refreshed.

Any help is appreciated. Here is an excerpt of the code:


Workbooks.Open Filename:="C:\Profile.xls"
Sheets("SELECTION").Select
Range("F3").Value = SNR

' THIS PART ONLY WORKS IF YOU STEP THROUGH THE MACRO USING THE DEBUGGER...IF YOU RUN MACRO NORMALLY THE CONNECTIONS DO NOT REFRESH
ActiveWorkbook.Connections("Connection").Refresh
ActiveWorkbook.Connections("Connection14").Refresh
ActiveWorkbook.Connections("Query from C_Profile").Refresh
ActiveWorkbook.Connections("Query from C_Profile1").Refresh

Hello,

I have two columns of data: column A contains the date and time in the form dd/mm/yyyy. Column B contains a number value. All the times are in order, so column A looks like:

01/01/2007
02/01/2007
03/01/2007

I have data from 2007 to 2010. I need to calculate an average daily value (in column B) for each month, and display it in column C. So, for January, I need to calculate the average of 31 days, February, 28 days, etc.

Is there a function I can use to do this? I've been trying the AVERAGEIF formula but can't get it to work. Any ideas would be much appreciated!

Many thanks,
Caitlin

Hi, hope someone can assist, i want to add some arrow syimbols in to a formula, so that when the formula works out it shows an up arrow for higher or a down arrow for lower, i am using this formula at the moment because i dont know any better but it works, putting in the word up or down:

I have entered the following formula in to a cell: =IF(S3<R3,"DOWN","UP") it works however i want to replace the word Down and up with the relevant arrows symbol. How do i do this?

Thanks

This is probably an easy question for most of you, but it's killing me. I tried searching before I posted this, but the suggestions given didn't seem to work for me.

I need to look up data from a cell on one Excel sheet, compare it to a list on a 2nd sheet and when they equal, take a value from a different column on the 2nd sheet and drop it back on the 1st sheet. Since that's a horrible explanation, let me try explaining it this way:

Sheet 1
Column A has a long list of code type 1s
Column E has a long list of code type 2s

Sheet 2
Cell C2 has code 1
Cell E2 needs code 2

I know it should take an index/match function, but nothing I try is working. What I'm trying is the following formula in Cell E2 of sheet 2:

=INDEX('Sheet 1'!A:A,MATCH(C2,'Sheet 1"!E:E,0),5)

But all I get is no result. What's driving me bonkers is that if I copy everything over to a single sheet, that formula works fine.