Turn Off Horizontal & Vertical Scroll Bars On one Worksheet Only

Hi
In excel i have a sheet open with about 30 columns in it. I try to use the scroll bar to move to the right and nothing happens apart from the scroll bar moves along. If i use the right button on the keyboard the scroll bar moves but i cannot see the columns I want. I cannot see anything that would of caused this.

Can anyone help?
Thanks

I need to create a bar chart for the year. I've already have 3 bars for each of the months, a plan, an actual, and a last year. I need to be able to split out just the actual bar, so that it is a stacked bar. The other two bars need to stay and remain unstacked. Is this possible?

Hi,

Recently, I find that the Pivot Table toolbar does not show up when I activate it. I have reinstalled Excel but it still does not show up when I activate it in the Pivot Table. Can someone advise me on what settings I shoudl do to turn it on again ? Thanks.

I have a pivot chart with a bunch of data series, and every time we
include/exclude one of the series to see how the chart changes, all the
colors change and we have to spend time re-identifying which series is
which, using the legend to check the colors.

Is there a way to "lock" the colors, so that the bars stay the same colors
regardless of whether other bars are included/excluded?

Thanks!
Keith

We have a workbook that does not allow us to use the Move or Copy command. When we right click on the worksheet and select Move or Copy, we are able to check the box to make a copy, but when we click OK nothing happens.

We have checked to make sure that the workbook and worksheet:
1. Are not protected
2. That there are no hidden worksheets
3. That there are not worksheets that exist with the same name
4. That not all the worksheets are selected

There are only two worksheets in this workbook.

Any ideas of why we are unable to make a copy of this worksheet within the same workbook or to another workbook?

I recently moved into a new office and I am using a brand new computer on our network. When trying to edit an existing file, I'm not able to select a single cell and type. After clicking on a cell, if I move the mouse at all (even without pressing the left button) it just continues highlighting cells no matter where I move the mouse. I am also not able to click on the tool bars at all. I have to actually Ctrl-Alt_del to get out of the program. I'm sure this is something simple, but I don't know that much about this program. Any help would be greatly appreciated.

I have a spread sheet that prints in duplex no matter what I do. I have made sure the printer duplex function is turned off but yet it insists in printing duplex. It is only this one workbook other workbooks print fine.
I hope you have an ansewer.

How do I restrict what I see on my screen (and specifically, limit the scroll
feature) to the rows and columns I'm actually using in an Excel 2003 Pro
spreadsheet?

Thought I'd append my experience of the above problem - you can find all sorts of references to it everywhere.

My problem was that a userform defined with Excel at work (containing DT pickers) gave the message in the title when opening it at home. I had a light-bulb moment and wondered whether there was a difference in the version numbers for MSCOMCT2.OCX at work and at home. Turned out the work version was newer. I then copied the MSCOMCT2.* files from work, made a backup of them at home and copied those from work to my C-drive (Windows XP - c:\windows\system32\ ).

No luck. I then rebooted the machine - still no luck.
Then, finally I unregistered the old DLL via
Code:

regsvr32 /u c:\windows\system32\MSCOMCT2.OCX

(not sure if this was necessary, but I didn't think it could hurt). Reregistered the DLL via
Code:

regsvr32 c:\windows\system32\MSCOMCT2.OCX

and what do you know - it worked.

Summa summarum - it could be an idea to check whether the two machines have different version numbers for the MSCOMCT2.OCX files.

I have never really used VBA and so am completely stuck at this problem. I need to create a macro which auto-populates a master worksheet from the individual user sheets in a shared workbook.

Sheet 1 is the master sheet "Team Stats". There will be an undetermined number of individual worksheets to accomodate new staff.

Each worksheet will be identical, using columns A-I with row 1 having the headings:

Date, Name, Reference, Value, Price, Age, Purchased?, Destination, Add. Products (the last 3 columns will have a drop-down list which will be used to enter data into the cell).

There will be a varying number of rows in each of the individual sheets.

If possible I would like the macro to run every time data is entered into one of the individual worksheets. If this is not then it would be fien to update every time the workbook is opened.

If anyone can help it would really cut down the time I spend collating these stats every day!

Hi all.

I have set up a workbook that is sent out to lots of different users. They each keep and use their own copy.

I have set it up so that everything looks OK and is visible on MY screen, but I'm conscious that some users may have different screen sizes, different toolbars set up, and so on, which might make some parts not immediately visible to them.

I have set up an auto-execute macro which automatically sets the zoom factor to best fit, for several of the worksheets, and this works fine.
Here's the code that does it.
Code:

Sheets("WELCOME").Select
    Range("A1:N18").Select
    ActiveWindow.Zoom = True

By repeating this code for each worksheet, I can make each one be zoomed just right.

However, the file contains 8 sheets that are all identically laid out, except the number of rows is different.
What I want to do is go to the worksheet that has the largest number of rows (it's always the same worksheet, so I know which one it is), set the zoom factor for THAT worksheet (which I can do, and it always has the same number of rows), and then take THAT zoom factor, whatever it is - and it will vary depending on the user - and apply that to the other worksheets that have a similar layout.

I could just go through each worksheet and zoom it automatically, but that would mean that some of the sheets looked very large, others very small, and I'd like them to have a consistent appearance.
I could also specify a range on each worksheet that was similar to the appropriate range on the longest worksheet, and zoom that automatically, but that's not ideal either, because some of the row heights vary from sheet to sheet, and again I'll end up with different font sizes.

Anyone know how to do this ?

Is there a way to use the new conditional formats (data bars, icon sets, etc) in PowerPoint? Basically, I'd like to create a table that shows icons based on data, like in Excel? I know I could paste a pre-made Excel table as a picture, but I'd like to avoid that if possible.

Thanks!

Hi Excel experts,
I am working on a worksheet, and would like to have an entire row transferred to another worksheet based upon a certain cell's value.

Having searched through the many solved threads on this site, I attempted to customize some of the code to my worksheet. Not being proficient in Macro/VBA, I failed. I figured I would ask for help, and see if anyone can provide what I am looking for.

Basically, I am attempting to construct a "work in process" file, and would like all completed work to be deleted from the work in process sheet, and transferred to a sheet that contains a running list of all work completed.

Attached is an example of what I am working on. I would like Column Q (Status) to determine if a row can be moved to a sheet that contains the list of all work completed, and eliminated from the original sheet. Once Status is updated to "Complete", it would be helpful to be able to run a macro/click a button that would perform the transfer.

Can anyone assist?

Thanks!

Is it possible to import a single text file into Excel, splitting the incoming data across multiple worksheets rather than a single worksheet? Each each row on the text file would be evaluated by the value in one of it's "columns" and written to the appropriate worksheet. The file is "!" delimited and has 11 columns for each row.

Currently, I import the file into one worksheet and cut/paste the rows manually into new worksheets/tabs. The files are very large, sometimes exceeding the 65,536 row limit, which I could avoid if the data was split out coming in.

Any help anyone could provide would be WONDERFUL. Thanks!

I saw two threads in this forum that asked this question, with no good answer. I am posting this solution for anybody still struggling with this.

The question:
How can you prevent a cell's contents from overflowing into the next cell?

Of course, you can make the column wider or turn on text wrapping, but you might not want to. Each of those solutions can mess up the layout of your sheet. You may just want to truncate the value.

Some people have suggested putting a space in the next cell. This is unnecessary, a pain in the but, and will mess up any ISBLANK type formulas, among other things.

The solution:
Select the cells in question and turn on text wrapping (Format>Cells>Alignment>Wrap Text).
Now select the row(s) in question and manually set the row height, by right clicking the row number and selecting "Row Height". Check the height of an adjacent row for a good value.

Your cells will now not spill over either horizontally or vertically. They will simply truncate anything that doesn't fit.

Be careful now, because parts of your data may be hidden. This can cause its own set of problems if one or two digits are neatly hidden away. Think ahead if other people might be using this sheet, and not be expecting to have some data hidden.

Tested in Excel 2002