Only Partial Page Prints

I have a problem sometimes. I will click on a cell to add information.
The cell turns blue and then wherever I move, it highlights those to.
No matter where I go on the page. If I Alt-Tab and work in another
program on my computer, that excel page keeps highlighting wherever
I move even in those other programs (I know this sounds confusing).
When I return to excel thousands and thousands of cells are blue.


The biggest problem is that the highlighting won't turn off, no matter
what. I can't select anything from the tool bars, do any work on the sheet or close the program.
I can close it only with the task manager but when I open it again,
the cursor is still stuck in the highlighting mode and won't perform any
other functions.

Do you think this is a problem with my computer, the excel program? I have changed my mouse and this didn't help.
Is there some shortcut to turn off this highlight feature other than restarting
my computer. Which is the only current way I can get rid of it.

Thanks for any advice,

I automating a task at work that will save some time. Seems simple enough but for some reason the code I have to cause IE to wait unil ready doesnt seem to work in all cases.

Im using :

'wait until the page loads
Do While ie.Busy Or ie.readyState READYSTATE_COMPLETE
DoEvents
Loop

This doesnt seem to work well enough, since actions are occuring that should NOT occur until the browser is ready.

Any other ideas as to how to make IE wait until the page is completely ready? I wondered about possibly checking the .innerHTML to verify that a unique page element is present.


Thanks,

Scott

I'm trying to open a pdf file from within excel vba. I have tried using the followhyperlink method but adobe acrobat opens very briefly then immediately closes Code:

Sub OpenPDF()

'Dim pdf As String

    On Error Resume Next

    'pdf file to open
    pdf = "K:\PDF\mypdf.pdf"

    'open the pdf file
    ActiveWorkbook.FollowHyperlink pdf

End Sub

So then I tried to create an instance of acrobat by setting a reference to the acrobat object but I can't get this to work either!

The code I'm using is Code:

Sub OpenPDF()

    Dim pdf As AcroPDDoc
    Dim strPDF As String

    Set pdf = CreateObject("AcroExch.PDDoc")
    
    'pdf file to open
    strPDF = "K:\PDF\mypdf.pdf"

    'open the pdf file
    pdf.Open strPDF

End Sub

Any ideas what could be wrong with either approach?

Thank-you

All on a sudden my mouse pointer in excel is not working properly. I cannot use my mouse to drag and fill, or to adjust the page break lines in the Page Break View mode. It always is in the shape of the white cross with black border and never changes it shape when pointed at the lower right edge of cells too. Now.......what to do in order to get out of this problem.
TIA

Hi All,

Random question i have a large Excel Workbook (which is protected) and has over five sheets on it - however one sheet has randomly decided not to scroll... yes i know sounds random! If i use the cursor and down arrows the selection just disappears off the screen.
The page will scroll if i filter by one field, but not if i select (All) for all filters.
All other worksheets scroll fine.
Any suggestions?

Thanks in advance.
Cheers Kaite

Even though I have used Page Layout to set my margins at .3 left and right, I cannot make my columns as wide as they need to be because the spreadsheet continues to print with one inch margins. I am on a deadline -- Help!

Hello,

Firstly i haven't used excel to a great extent since my college days. So i'm having to re-learn 99.9% of everything i once new...

I am volunteering for a non profit organization and trying to create a reservation system for the rooms that they have - kind of like hotel software, but in excel (i did a similiar thing in college but for plane seats)

Please find it attached.

What i need it to do:

Copy all of the info from the main page to the guest lit (a new row each time).

From the guest list to the Gannt chart - i did a few tutorials on dynamic gantt charts using conditional formatting but cannot get them to work when based on data on a different worksheet.

Finaly is there a way to check for availabilty on any given date?

if just someone could point me in the right direction, i would be appreciate it so much words can't express!!!

Best Regards,

Jamie

P.S for the calender drop down on the main page, i'm using 'microsoft time & date picker 6.0)

http://www.2shared.com/file/6521961/...ibsV05b32.html - pop ups on this site

http://www.easy-share.com/1906519167/RibsV0.5b3.2.xlsm - same file, better website

Okay, so I tried (for hours) to find a solution to this and have finally gotten frustrated to the point where i think asking here will be my best bet.


Basically I want to export data from excel worksheets to various places on a word document I had. I have created a word template as well as bookmarks for that template, as that seems to be the recommendation for performing such a task with excel.

My problem is ... Now what?

I basically have 1 constant worksheet that contains all my affiliates info (Name, Address etc), which i'd like to use to populate some bookmarks in my word template, and then i have another worksheet for the previous month, indicating sales etc for that affiliate. I intend on adding a new worksheet every month that i would use to create new invoices.

Furthermore, i'd really like to be able to update a new file (or perhaps a new page on the same file) for each company with the use of a button, similar to the one's you'd see in an access form.

Can anyone help? Let me know if you need me to clarify.

Thanks!

Matt

Using VBA, I am trying to retrieve the contents of the Source of a web page (the same as would appear if you right-clicked on the page and chose "View Source") into a variable so I can work on it in VBA (using InStr, etc.).

The problem is I can use code such as
strHTMLText = ie.Document.body.innerText
or
strHTMLText = ie.Document.body.outerText
to retrieve the code, but in either case only part, not all, of the source code is captured. I need ALL the code. Is there some kind of code such as ie.Document.body.allText or similar that would perform this function?

Much obliged!

Hi! I am new to Excel and I am creating fillable forms in excel which are protected so that users canonly input data in certain cells. I am using Excel 2003. The users told me that they do not want text to go beyond the edge of the page when they are inputting data. They also want the words to wrap when they reach the end of the sentence. I am also using check boxes(yes/no) and Ifind it difficult to make the adjacent cells fillable only Thanks for your help and correct me if I am wrong as I am new to this board.

I did a bit of browsing on this problem. Found others suffering the same but haven't found any conclusive answer yet.

Every so often when I attempt to save a file, (including save as), Excel won'r let me. By won't let me I mean:

using Save doesn't appear to do anything using Save As doesn't either do anything, the dialog is not displayed and if I am doing via the File menu then the File menu is exited and the previous ribbon tab is displayed (i.ethe one I was on before clicking 'File') if I close the workbook I am prompted to save, close without saving or cancel. Clicking save just invokes the same msgbox again. I can't work out when it goes into this mode. Some days I can work without this problem, other days I encounter this 2 or 3 times.

The only thing I could suspect was I think this started around about the time I installed xlDennis' code library. I have uninstalled the addin and so far so good, but I cannot categorically say that this was the cause.

Anyone have any idea?

Cheers
Jon

Edit: I have read this: http://support.microsoft.com/kb/271513
Doesn't seem to cover the issue I describe

Is it possible to import a single text file into Excel, splitting the incoming data across multiple worksheets rather than a single worksheet? Each each row on the text file would be evaluated by the value in one of it's "columns" and written to the appropriate worksheet. The file is "!" delimited and has 11 columns for each row.

Currently, I import the file into one worksheet and cut/paste the rows manually into new worksheets/tabs. The files are very large, sometimes exceeding the 65,536 row limit, which I could avoid if the data was split out coming in.

Any help anyone could provide would be WONDERFUL. Thanks!

I know this question has been asked a bajillion times, so I apologize for the redundancy.

I am working with an Excel spreadsheet and saving it as a .csv file in order to upload to an application that parses out the .csv data as transactions. The system requires .csv files, so this is how I need to save my doc (with this extension). I have been successful at preventing Excel from coverting that long number into scientific format. I have saved as a TXT file, pasted the longer number and it displays correctly. That is all good. But I have to save as a .csv. So if I do that, close the Excel window, and then open again (as the .csv file), the numbers are back to being displayed in scientific format. I have tried creating an Excel doc from scratch and entering text in Text format, to see if this created a cleaner file. But again, the second I save as .csv, close the window and then open that file up again, that dang scientific format is back.

Does anyone have any idea of how to work around this? Once I have successfully gotten the numbers to display as the long-chain number, how can I get them to "stick" so that they don't revert back to scientific format when I reopen the file?

Thanks so much for your help!

Hello,

I have a number of different files that I often need to run a macro on. In order for me to do it on the 75-100 files I have at any given time, I need to open one, run the macro, close and save, then open the next one.

Is it possible to write a macro that will start with the first file in a folder, open it and update links, run a macro, save and close, and open the next file in the folder until it has open all the files in the folder.

I have experience with creating macros that reference different workbooks, but not sure how to go about opening files with different filenames (without referencing the exact filename).

I'd like to be able to have basic code for opening, saving and closing, opening next file, saving and closing, etc. and input the macro I'd need to run in each file in the appropriate location. Is this possible? Any help is greatly appreciated!!

Thanks,
Jason

I'm having a problem in a workbook with several ActiveX command buttons. I had been using the form control buttons to run macros, but the boss wanted each button to have it's own, different color. So I removed the form control buttons and created new ActiveX command buttons. I got into the button properties and set the background colors. I added the _Click code to run the macros when the user clicked the buttons.

All of the buttons were working fine. Then I saved and closed the workbook and went to lunch. Now when I open the workbook, the buttons don't work! When I click them nothing happens. They appear frozen. They don't even seem to click. No error message. Nothing.

If I right-click the button in Design Mode and select Properties, I get sheet properties not the button properties. I can't seem to locate the command button properties any longer. I still see the button name "cmdButtonGetInfo" and "=EMBED("Forms.CommandButton.1","") in the name box and formula bar. The odd thing is if I create a new button it works fine until I save and close the file. When I reopen the file none of the buttons work.

It's like the buttons are being disabled when I close or open the file. Any suggestions?