Pasting To Single Cell But Still Getting "not Same Size" Error.

I am looking for the code to select the visible data after applying a data filter. Actually I know how to select the data after applying the data filter but the issue is I am not able to exclude the header row and give the target range as used (non-blank) rows only!!

I am using below code to Select the Visible rows in the target range:

Code:

Range("A:p").SpecialCells(xlCellTypeVisible).Select

Problems in this code a

1) after applying the filter, while selecting the data it is selecting all the rows in given range till last row on the workbook. I need this to select the the data only till the last used row in the given range.

2) It is not possible to provide the address of the first row after we apply the filter since the first row address may change depending on the values in the table.

E.g. 1st time when I am running the macro the first row in the visible filtered data is starting at Cell address A4 and next time when I will run the macro it may be A6

3) The Code is also selecting the 1st row which is a header row. How can we exclude it from selection.

Some one please revert with the solution.
Thanks in advance.

Hi all.

I have set up a workbook that is sent out to lots of different users. They each keep and use their own copy.

I have set it up so that everything looks OK and is visible on MY screen, but I'm conscious that some users may have different screen sizes, different toolbars set up, and so on, which might make some parts not immediately visible to them.

I have set up an auto-execute macro which automatically sets the zoom factor to best fit, for several of the worksheets, and this works fine.
Here's the code that does it.
Code:

Sheets("WELCOME").Select
    Range("A1:N18").Select
    ActiveWindow.Zoom = True

By repeating this code for each worksheet, I can make each one be zoomed just right.

However, the file contains 8 sheets that are all identically laid out, except the number of rows is different.
What I want to do is go to the worksheet that has the largest number of rows (it's always the same worksheet, so I know which one it is), set the zoom factor for THAT worksheet (which I can do, and it always has the same number of rows), and then take THAT zoom factor, whatever it is - and it will vary depending on the user - and apply that to the other worksheets that have a similar layout.

I could just go through each worksheet and zoom it automatically, but that would mean that some of the sheets looked very large, others very small, and I'd like them to have a consistent appearance.
I could also specify a range on each worksheet that was similar to the appropriate range on the longest worksheet, and zoom that automatically, but that's not ideal either, because some of the row heights vary from sheet to sheet, and again I'll end up with different font sizes.

Anyone know how to do this ?

I want to Sum Column "H" starting form "H2" all the way down (rows may vary)
Then Paste My answer in "AM1"
This is what I have so far and for some reason is not working.
Code:

myRange = ActiveSheet.Range("H2", Range("H2").End(xlDown))
Range("AM1") = WorksheetFunction.Sum(myRange)

Any Ideas?

Hi All,

I have the below code which deletes all items from a listbox and my excel sheet which is the source for populating that listbox. I am using a option button style for my listbox and the selection style as single .i.e. you can select only one item at one go in the lisbox. I want my macro to delete the selected item from my worksheet .i.e. it's entire row so that it doesn't reflect in my lisbox any more. Below is my code :

Code:

Private Sub CommandButton2_Click()
 'REMOVE SELECTION
 
  Dim I As Long
 
    With ListBox1
      For I = .ListCount - 1 To 0 Step -1
       If .Selected(I) Then
           .RemoveItem I
           Sheets("URL List").Rows(I + 2).EntireRow.Delete
           
        End If
      Next I
    
End With

End Sub

Thanks a lot for your help in advance.

Hi all,

I have written some code that when a button is selected will Refresh a Data Query Table and all of it's information. However, I seem to be getting issues, can some one point me in the right direction with the code?

Code:

 
.Sheets("Sheet 1").ListObject.QueryTable.Refresh BackgroundQuery:=False

When I recorded myslef doing this process it looked like this:

Code:

 
Sheets("Sheet 1").Select
Range("D70872").Select
Selection.ListObject.QueryTable.Refresh BackgroundQuery:=False

Many thanks!

I am using XL2007 and have a macro that refreshes microsoft query connections. The issue is the refreshes only happen if you step through the macro using the debugger. When you run the macro normally, everything else functions properly, but the data is not refreshed.

Any help is appreciated. Here is an excerpt of the code:


Workbooks.Open Filename:="C:\Profile.xls"
Sheets("SELECTION").Select
Range("F3").Value = SNR

' THIS PART ONLY WORKS IF YOU STEP THROUGH THE MACRO USING THE DEBUGGER...IF YOU RUN MACRO NORMALLY THE CONNECTIONS DO NOT REFRESH
ActiveWorkbook.Connections("Connection").Refresh
ActiveWorkbook.Connections("Connection14").Refresh
ActiveWorkbook.Connections("Query from C_Profile").Refresh
ActiveWorkbook.Connections("Query from C_Profile1").Refresh

I am trying to do a very simple copy and paste of a simple formula in Excel 2007 and nothing seems to be working. Excel will not let me copy and paste a formula and will only paste the value into to workbook. For instance, if I make a very simple spreadsheet such as:
A1 type in 10, A2 type in =A1 (calculated A2 to be 10)
B1 type in 5

And then click the copy on B1, and then click paste special on cell B2, the only options it gives me are text and unicode text and so no matter how I paste, cell b2 will always be populated with a value of 5. I cannot imagine a simpler copy and paste and no matter what I do I can't make this work.
All cells are formatted as general. It seems that all copy and pasting of formulas in my excel has been disabled. If I open any spreadsheet on my computer, I can't copy and paste formulas, but do the exact same thing on the exact same spreadsheet on any other computer and it works no problem.

Any help?

Hello,

As the title goes this is as simple as it gets. The macro worked good when I was using excel 2003 but now that I have 2007 everything works for except the resizing (Picture.Width & Picture. Height).

Code:

Sub AddImage()
Dim strPath As String
Dim strFile As String
Dim Picture As Object
Dim Response As String
Dim C As Range
strPath = "C:\\Photos\"
 
For Each C In Range("A1", Range("A65536").End(xlUp))
    If C  0 Then
        With C.Offset(0, 1)
            Set Picture = Nothing
            On Error Resume Next
            Set Picture = Sheets("Raw Pix").Pictures.Insert(strPath & C.Value & ".jpg")
            Picture.Top = .Top
            Picture.Left = .Left
            Picture.LockAspectRatio = msoTrue
            Picture.Width = 157
            Picture.Height = 138

        
    End With
    End If
     
NextC:
Next C
End Sub

I have tried to record some macros while I am resizing the pictures but to no avail the macros are blank.

Please help

Thanks!

We have a number of Excel users in our office who cannot copy and paste
between Excel workbooks. They can copy and paste between worksheets. When
you highlight the section to copy and then go to the new workbook both the
paste
and paste special are "grayed out". This is true whether you right-click the
mouse, go to the edit menu, or use control keys. This occurs with any data
type and the most simple workbooks. I have seen some suggestions here but
none have worked for this particular problem. I have reset the menus and
renamed the .xlb files and neither helps. You can open the clipboard and the
paste will work, but there is no paste special option. Any help would be
greatly appreciated. Thanks!

Hi
I am a new user and trying to setup a database in excel. I can select all addresses and copy but when trying to paste into excel it does so in 1 cell.

Is there a way I can paste the separate email id's into individual cells so I don't have to do it individually?

Many thanks
Patrick

When using the copy and paste function it is extremely slow to paste the
result. Also the file size seems to be increasing to a much larger size for
no reason.
Any feedback would be appreciated.

Hi All,

Random question i have a large Excel Workbook (which is protected) and has over five sheets on it - however one sheet has randomly decided not to scroll... yes i know sounds random! If i use the cursor and down arrows the selection just disappears off the screen.
The page will scroll if i filter by one field, but not if i select (All) for all filters.
All other worksheets scroll fine.
Any suggestions?

Thanks in advance.
Cheers Kaite

Hi,

I use filters a lot at my work. One thing I've noticed is that if I have something filtered and want to copy and paste only what I see from one column to another column right next to it, it will copy what is filtered, but then paste into the unfiltered portion.

Is there some way to copy only what I see when it's filtered, THEN paste only onto the adjancent cells which is also filtered?

For example let's say i have each of the number below in a cell (Fig 1). And then I hide rows 2 -3, so only 1 and 4 is showingI only see 1 & 4 in column A. I want to copy and paste 1 and 4 to the next column over one row so it looks like Fig. 2 when unhidden. Not like Fig. 3.

Fig. 1

1
2
3
4

Fig. 2

1 1
2
3
4 4

Fig. 3
1 1
2 4
3
4

I know that you can do PASTE > VALUES in order to keep your conditional formatting on an existing sheet, but sadly the people in my office are prone to not understanding this ("It's a bit technical") and so they just pasting blocks of text from elsewhere and lose it all.....

Does anyone have any suggestions about how to maintain the formatting when people just do a traditional C&P ?

Thanks

I have a co-worker's file that he is having trouble with. He is using Excel 2000 SP3. When copying a cell with a formula in it of "=D6+C6" and pasting it into the next cell down, it will display the same value in the cell as the calculated value from above, but has the correct formula displayed in the formula bar of "=D7+C7".

Example:
A1: 50
A2: 10
B1: 60
B2: 20

A3: Formula: =A1+A2 Displays: 60
Right click A3, Copy, right click B3, paste
A3 displays 60

When I click save, it will change the display value to 80.

I am trying this on his workstation and mine. Mine has Office 2010, so I think there might be an issue with the file itself.

Also, not just copy and paste. I can also just click the top cell after filling in the formula and then drag the bottom right of the cell downward and it will do the same of filling in the correct formula, but have the incorrect value.

I know that I could get him to just click save each time before really looking at the results, but that is just a band aid to the problem.

Any ideas how to fix this?