Pivot Table Filter Multiple Selection Not Working |
Pivot Table Filter Multiple Selection Not Working - Excel |
|
Please help.
I have a pivot table with multiple fields and I want to sort the whole table by specific dates. I drag the date field to report filter and try to select multiple dates using the "select multiple date" check box.
It does not filter by the selected dates. It will select by all and will select 1 individual date but not by the check boxed dates.
the drop down field always says all when I select mutiple dates.
Any ideas?
Rooster
I have a pivot table with multiple fields and I want to sort the whole table by specific dates. I drag the date field to report filter and try to select multiple dates using the "select multiple date" check box.
It does not filter by the selected dates. It will select by all and will select 1 individual date but not by the check boxed dates.
the drop down field always says all when I select mutiple dates.
Any ideas?
Rooster
Excel VBA Course - From Beginner to Expert
200+ Video Lessons 50+ Hours of Instruction 200+ Excel Guides
Become a master of VBA and Macros in Excel and learn how to automate all of your tasks in Excel with this online course. (No VBA experience required.)
(80% Discount Ends Soon!)
Similar Topics
Hi everyone,
I found an excellent macro this morning that allows the user to filter a pivot table based on the value found in a specific cell. This cell essentially acts as a search bar, allowing the user to type in what they are looking for rather than select it from a drop-down list.
The macro works perfectly for my purposes except in one regard: I can no longer perform a "show all" filter. If I leave the "search bar" cell blank, the pivot table shows nothing. I'm sure that there is an easy fix for this but I'm still learning the basics of how to write and use macros. How can I change the code so that when I leave the cell blank, the pivot table shows all? The search bar cell is D2.
Thanks for your time!
I found an excellent macro this morning that allows the user to filter a pivot table based on the value found in a specific cell. This cell essentially acts as a search bar, allowing the user to type in what they are looking for rather than select it from a drop-down list.
The macro works perfectly for my purposes except in one regard: I can no longer perform a "show all" filter. If I leave the "search bar" cell blank, the pivot table shows nothing. I'm sure that there is an easy fix for this but I'm still learning the basics of how to write and use macros. How can I change the code so that when I leave the cell blank, the pivot table shows all? The search bar cell is D2.
Thanks for your time!
I am looking for the code to select the visible data after applying a data filter. Actually I know how to select the data after applying the data filter but the issue is I am not able to exclude the header row and give the target range as used (non-blank) rows only!!
I am using below code to Select the Visible rows in the target range:
Code:
Problems in this code a
1) after applying the filter, while selecting the data it is selecting all the rows in given range till last row on the workbook. I need this to select the the data only till the last used row in the given range.
2) It is not possible to provide the address of the first row after we apply the filter since the first row address may change depending on the values in the table.
E.g. 1st time when I am running the macro the first row in the visible filtered data is starting at Cell address A4 and next time when I will run the macro it may be A6
3) The Code is also selecting the 1st row which is a header row. How can we exclude it from selection.
Some one please revert with the solution.
Thanks in advance.
I am using below code to Select the Visible rows in the target range:
Code:
Range("A:p").SpecialCells(xlCellTypeVisible).Select
Problems in this code a
1) after applying the filter, while selecting the data it is selecting all the rows in given range till last row on the workbook. I need this to select the the data only till the last used row in the given range.
2) It is not possible to provide the address of the first row after we apply the filter since the first row address may change depending on the values in the table.
E.g. 1st time when I am running the macro the first row in the visible filtered data is starting at Cell address A4 and next time when I will run the macro it may be A6
3) The Code is also selecting the 1st row which is a header row. How can we exclude it from selection.
Some one please revert with the solution.
Thanks in advance.
I'm attempting to filter columns E, G, and I all at the same time. I need to
display rows that have values greater than 0 in any one of those three
columns. So far I can only filter progressively. If I filter column E and
then filter column G, the second filter is only applied to the results of the
first filter.
Does anybody know if it's even possible to do what I'm trying to do?
display rows that have values greater than 0 in any one of those three
columns. So far I can only filter progressively. If I filter column E and
then filter column G, the second filter is only applied to the results of the
first filter.
Does anybody know if it's even possible to do what I'm trying to do?
I have a long list of item descriptions that I need to filter down to descriptions containing words like "valve" or "ring" or "root" or "epic" (17 key words in all). The basic custom filter looks like it only lets me filter for 2 words.
I have some experience working with advanced filter for things like >100 but that's about it. Any help with this would be so appreciated.
I have some experience working with advanced filter for things like >100 but that's about it. Any help with this would be so appreciated.
Is it possible to apply a filter to multiple sheets within the same Excel workbook, using the same filter criteria?
For example, suppose you have tables of data on 3 different tabs, all having the same headings. Suppose one of the headings is "gender". If you apply a filter to the table on Sheet 1, to only show the rows containing the word "female", is it possible to have the tables on Sheets 2 and 3 automatically update to only show the "female" rows? Or would you have to manually update the filter criteria in Sheets 2 and 3?
I hope this makes sense. Thank you in advance for any help.
For example, suppose you have tables of data on 3 different tabs, all having the same headings. Suppose one of the headings is "gender". If you apply a filter to the table on Sheet 1, to only show the rows containing the word "female", is it possible to have the tables on Sheets 2 and 3 automatically update to only show the "female" rows? Or would you have to manually update the filter criteria in Sheets 2 and 3?
I hope this makes sense. Thank you in advance for any help.
Hi all,
I hope you can help me with what I would like to do. I've searched and searched and not come up with anything yet!!
I have one sheet which is my 'data' sheet with a number of columns, one of which is a date which may be repeated.
I then want to use another sheet with two cells where two dates can be entered and a button which allows you to copy the rows of data from the data sheet which have dates between the two specified originally. The list in the data sheet may not be in date order although I could update a macro to do this for me if needed. I would also like to do it so that if "ALL" is typed in the date fields, it pulls over ALL the data. (Or something similar)
Any help you can give would be much appreciated.
Cheers,
Kevin
I hope you can help me with what I would like to do. I've searched and searched and not come up with anything yet!!
I have one sheet which is my 'data' sheet with a number of columns, one of which is a date which may be repeated.
I then want to use another sheet with two cells where two dates can be entered and a button which allows you to copy the rows of data from the data sheet which have dates between the two specified originally. The list in the data sheet may not be in date order although I could update a macro to do this for me if needed. I would also like to do it so that if "ALL" is typed in the date fields, it pulls over ALL the data. (Or something similar)
Any help you can give would be much appreciated.
Cheers,
Kevin
I have imported a DBF file into Excel and have a column of dates that are missing the leading zero on single didgit months. When I try to us the custom format of mm/dd/yyyy it doesn't work (interestingly, after I select that format if I click on an individual cell it changes to the right format).
Does anyone know a better way to do this?
Thanks in advance!
Does anyone know a better way to do this?
Thanks in advance!
Hi,
I made a budget with many narrow columns and have turned the data into a table. I will only ever filter the data with the left-hand most column. However, all the other columns are filled each with the grey drop-down filter arrow button, and I can no longer see the headings of these columns and frankly seeing 50 little unused arrow buttons is rather ugly. Is there any way to simply remove the filter drop-down buttons on some columns or even all of them, just leaving a filter button at the heading of the first column? I know I can hide the headings, but then I lose sight of the first filter arrow that I use.
Sorry to ask such a bizarre question, but I appreciate your help.
Thanks
I made a budget with many narrow columns and have turned the data into a table. I will only ever filter the data with the left-hand most column. However, all the other columns are filled each with the grey drop-down filter arrow button, and I can no longer see the headings of these columns and frankly seeing 50 little unused arrow buttons is rather ugly. Is there any way to simply remove the filter drop-down buttons on some columns or even all of them, just leaving a filter button at the heading of the first column? I know I can hide the headings, but then I lose sight of the first filter arrow that I use.
Sorry to ask such a bizarre question, but I appreciate your help.
Thanks
Hi,
Im working with a large data spreadsheet that has Yes and No answers in different columns. There are blanks within the selection too.
I need to calculate only the Yes.
I have tried using the filters in the Pivot Table field list and they are not working.
So now i'm trying to add a COUNTIF formula in the Calculated Fields section.
The formula I'm using is =Countif('Time limit extension'="yes") and i get the answer "too few."
What should I be using in the formula to get the calculated field to work? I have search the whole forum and I haven't found an answer that can help me.
Please HELP!!!
Im working with a large data spreadsheet that has Yes and No answers in different columns. There are blanks within the selection too.
I need to calculate only the Yes.
I have tried using the filters in the Pivot Table field list and they are not working.
So now i'm trying to add a COUNTIF formula in the Calculated Fields section.
The formula I'm using is =Countif('Time limit extension'="yes") and i get the answer "too few."
What should I be using in the formula to get the calculated field to work? I have search the whole forum and I haven't found an answer that can help me.
Please HELP!!!
I feel like this should be really easy and I am just out of it today but I cannot figure this out. I want to lock a row and filter (with filter,not sort, tool) the other rows. I attached an example
The row in RED I want to never be changed or added in the filter, but I want row 2 and 1 to filter together. So I want (in this case) the flavor to filter with the same number. SO i guess the filter process would be dependent upon the total number of votes. Any ideas? Thanks!
I had to create the information in tables and went from there. Got it. Thanks!
The row in RED I want to never be changed or added in the filter, but I want row 2 and 1 to filter together. So I want (in this case) the flavor to filter with the same number. SO i guess the filter process would be dependent upon the total number of votes. Any ideas? Thanks!
I had to create the information in tables and went from there. Got it. Thanks!
Is there a way to calculate the average days between a column of dates?
Basically, I've got a sheet that contains a table of entries, and each entry gets a date stamp in the first column. I would like to have the sheet display the average time, in days, between entries. Is this possible?
Thank you in advance!
~cp
Basically, I've got a sheet that contains a table of entries, and each entry gets a date stamp in the first column. I would like to have the sheet display the average time, in days, between entries. Is this possible?
Thank you in advance!
~cp
I found this solution for "drop down list with hyperlink" but it did not work.
Perhaps a better solution is to use a workaround that relies on the HYPERLINK function to refer to whatever is selected in the drop-down list. For instance, if you have your data validation drop-down list in cell A1, then you might put the following formula in cell B1:
=HYPERLINK(A1, "Goto Link")
The solution directly above provides exactly what I am looking for
in the field where I write the formula, but it fails to hyperlink.
I have created a drop down list and linked each one of them to a
specific worksheet. When I select them individually they link to
appropriate worksheet. But when I select them in the drop down
list I receive the following error when I select the Hyperlink in
cell B1 as directed above.
"Cannot open the specified file"
Any thoughts?
Bob
Perhaps a better solution is to use a workaround that relies on the HYPERLINK function to refer to whatever is selected in the drop-down list. For instance, if you have your data validation drop-down list in cell A1, then you might put the following formula in cell B1:
=HYPERLINK(A1, "Goto Link")
The solution directly above provides exactly what I am looking for
in the field where I write the formula, but it fails to hyperlink.
I have created a drop down list and linked each one of them to a
specific worksheet. When I select them individually they link to
appropriate worksheet. But when I select them in the drop down
list I receive the following error when I select the Hyperlink in
cell B1 as directed above.
"Cannot open the specified file"
Any thoughts?
Bob
Since there isn't a ISDATE function in excel.
The following can be used to simulate the same, and avoid having to achieve the same with VBA's IsDate function:
STEPS:
1- Format the column (ex A) as text
2- Formula to check for valid dates:
=ISERROR(DATEVALUE(A1))
The following can be used to simulate the same, and avoid having to achieve the same with VBA's IsDate function:
STEPS:
1- Format the column (ex A) as text
2- Formula to check for valid dates:
=ISERROR(DATEVALUE(A1))
Hi there,
I am currently using 'Activecell.Offset(1,0).Select' to move down one cell at a time when I click on a button.
The problem I have now is that if someone was to filter by something then the 'next cell down' could be hidden behind the filter (by that I mean it didn't meet the filter criteria).
Is there anyway to move down to the next row, even if that row does not follow on Sequentially .
Any help would be greatly appreciated.
Regards,
James
I am currently using 'Activecell.Offset(1,0).Select' to move down one cell at a time when I click on a button.
The problem I have now is that if someone was to filter by something then the 'next cell down' could be hidden behind the filter (by that I mean it didn't meet the filter criteria).
Is there anyway to move down to the next row, even if that row does not follow on Sequentially .
Any help would be greatly appreciated.
Regards,
James
In my pivot table I have a lot of cells without any data. The report looks like garbage with all the (BLANK) sohowing up in the report.
I've tried condtional formatting where if the cells = (BLANK) it woulf format them as white -did not work
I tried the pivot table options and clicking on the box "for empty cells show" and set it to 0 then empty but that did not work.
any Ideas???
Thanks
I've tried condtional formatting where if the cells = (BLANK) it woulf format them as white -did not work
I tried the pivot table options and clicking on the box "for empty cells show" and set it to 0 then empty but that did not work.
any Ideas???
Thanks
Hi All,
Random question i have a large Excel Workbook (which is protected) and has over five sheets on it - however one sheet has randomly decided not to scroll... yes i know sounds random! If i use the cursor and down arrows the selection just disappears off the screen.
The page will scroll if i filter by one field, but not if i select (All) for all filters.
All other worksheets scroll fine.
Any suggestions?
Thanks in advance.
Cheers Kaite
Random question i have a large Excel Workbook (which is protected) and has over five sheets on it - however one sheet has randomly decided not to scroll... yes i know sounds random! If i use the cursor and down arrows the selection just disappears off the screen.
The page will scroll if i filter by one field, but not if i select (All) for all filters.
All other worksheets scroll fine.
Any suggestions?
Thanks in advance.
Cheers Kaite
I have a very simple pivot table that I am trying to use as a data source for a VLOOKUP request. Unfortunately, every time I do it I get the result #NA. I have tried recreating the results from the pivot table in the worksheet next to it, and am able to use VLOOKUP on them successfully, but as soon as I point the VLOOKUP array to the pivot table, I get the #NA result
Can VLOOKUP be used on pivot tables? If so, is there any special syntax I need to use?
Thanks
Can VLOOKUP be used on pivot tables? If so, is there any special syntax I need to use?
Thanks
Also, I cannot move the Pivot Table from the new Worksheet it is created in, to my existing Worksheet.
I am running Excel 2011 for Mac.
I have a Worksheet with a small amount of data, and when I click the Pivot Table button it automatically creates the Pivot Table in a new Worksheet. The Pivot Table data is fine, but I want it to display alongside the source data.
I've tried using the Move Pivot Table option and choosing to Create Pivot Table in Existing Worksheet and choosing a source cell alongside my current data, but nothing appears. Also, I checked in Edit menu and found that the Pivot Table appears to have not even been created/moved because there is no option to undo it.
Appreciate any help, let me know if you have any further questions.
Hunter
I am running Excel 2011 for Mac.
I have a Worksheet with a small amount of data, and when I click the Pivot Table button it automatically creates the Pivot Table in a new Worksheet. The Pivot Table data is fine, but I want it to display alongside the source data.
I've tried using the Move Pivot Table option and choosing to Create Pivot Table in Existing Worksheet and choosing a source cell alongside my current data, but nothing appears. Also, I checked in Edit menu and found that the Pivot Table appears to have not even been created/moved because there is no option to undo it.
Appreciate any help, let me know if you have any further questions.
Hunter
Hi there
I am trying to calculate our On Time Delivery. I want this as a simple percentage of jobs. I have got this running in the following way:
Column M - Estimated Delivery dates
Column N - Actual Delivery dates
Column O - =IF(SUM(M2-N2)>0,1,0)
Then I have calculated On Time Delivery as: =SUM((SUM(O2:O252))/(COUNTA(N2:N252)))
This seems to work fine. My problem is, if we enter a date in Estimated without a corresponding Actual date, the formula for Column O fills out anyway and improves our On Time Delivery Percentage. How can I set this up so that the formula doesn't calculate if there is no data in Column N?
Any help much appreciated
Thanks,
James
I am trying to calculate our On Time Delivery. I want this as a simple percentage of jobs. I have got this running in the following way:
Column M - Estimated Delivery dates
Column N - Actual Delivery dates
Column O - =IF(SUM(M2-N2)>0,1,0)
Then I have calculated On Time Delivery as: =SUM((SUM(O2:O252))/(COUNTA(N2:N252)))
This seems to work fine. My problem is, if we enter a date in Estimated without a corresponding Actual date, the formula for Column O fills out anyway and improves our On Time Delivery Percentage. How can I set this up so that the formula doesn't calculate if there is no data in Column N?
Any help much appreciated
Thanks,
James
How I Can Maintain The Stock Register On Excel Sheet By Date Wise ?
But I do not want to insert any sheet for different dates & also the format will not be copied & paste in the same sheet. Just at the place of Date the date will be changed & the datas will be entered manually for each day.
In future, when I shall put the date, the datas will show that particular date's datas only.
Can anyone help me ?
But I do not want to insert any sheet for different dates & also the format will not be copied & paste in the same sheet. Just at the place of Date the date will be changed & the datas will be entered manually for each day.
In future, when I shall put the date, the datas will show that particular date's datas only.
Can anyone help me ?