Button To Unlock & Unhide All Columns

Hi. I have a row in a spreadsheet in Excel that is hidden but i am unable to unhide it. I have tried the usual way by hovering between the rows above and below until i get the double line but this does not happen. I have also tried going through the Format - Row - Unhide option but this also doesn't work. Any suggestions?

Hi there, longtime user firsttime poster. Looking for some help as I am a non-expert with macros. Here's what I'm trying to do:

We have to submit things to a certain regulatory body and we usually enter tasks in as soon as they come, do the submission, and then keep a record of that submission.

So, I have a workbook with two sheets, one is "TO DO", the other is "ARCHIVE". Both sheets have the same columns and everything. I am looking for a macro that will automatically cut a (row) from the TO DO sheet and paste it in into the ARCHIVE sheet once it is done, then delete the cut row from the TO DO list so it stays topped up.

The trigger for archiving is the columns M and N which are titled "Complete ?" and each has a validation drop down that says "YES". When both cells in columns M and N have the YES in them, I would like the macro to make the above mentioned actions.

I ran a search on the forums and found something similar, but not quite what I was looking for.

Any help?

I saw two threads in this forum that asked this question, with no good answer. I am posting this solution for anybody still struggling with this.

The question:
How can you prevent a cell's contents from overflowing into the next cell?

Of course, you can make the column wider or turn on text wrapping, but you might not want to. Each of those solutions can mess up the layout of your sheet. You may just want to truncate the value.

Some people have suggested putting a space in the next cell. This is unnecessary, a pain in the but, and will mess up any ISBLANK type formulas, among other things.

The solution:
Select the cells in question and turn on text wrapping (Format>Cells>Alignment>Wrap Text).
Now select the row(s) in question and manually set the row height, by right clicking the row number and selecting "Row Height". Check the height of an adjacent row for a good value.

Your cells will now not spill over either horizontally or vertically. They will simply truncate anything that doesn't fit.

Be careful now, because parts of your data may be hidden. This can cause its own set of problems if one or two digits are neatly hidden away. Think ahead if other people might be using this sheet, and not be expecting to have some data hidden.

Tested in Excel 2002

I have protected a worksheet as it has several formulae on that I do not wat anyone else to mistakingly delete. I then have spent time on setting up a sheet to track changes (just in case this has any bearing on the problem). This is the only thing that I think I have changed since protecting this morning and now I cannot unprotect the sheet. I have not protected the workbook and the unprotect sheet function is now greyed out.

Any ideas?

Afternoon all,

This is what I want to happen but I have no idea how to do it.

If C14 = "IV" THEN E14 = Locked AND F14 = Unlocked
If C14 = "RV" THEN E14 = Unlocked AND F14 = Locked
If C14 = "AJ" THEN E14 AND F14 = Unlocked

Another thing I would like to make possible is for this to work throughout cells C14:C450, E14:E450 and F14:F450

Can anyone help me out on this?

Hi all,

I hope you can help me with what I would like to do. I've searched and searched and not come up with anything yet!!

I have one sheet which is my 'data' sheet with a number of columns, one of which is a date which may be repeated.

I then want to use another sheet with two cells where two dates can be entered and a button which allows you to copy the rows of data from the data sheet which have dates between the two specified originally. The list in the data sheet may not be in date order although I could update a macro to do this for me if needed. I would also like to do it so that if "ALL" is typed in the date fields, it pulls over ALL the data. (Or something similar)

Any help you can give would be much appreciated.

Cheers,

Kevin

Hi

I need to open a password protected workbook using VBA.

I've tried the code below but I still get prompted for a password.

Code:

Workbooks.Open Filename:="\\HOME\Working\Report.xls" _
        , Password:="xxxx"

How do I get it to open automatically???

I have a Workbook with 2 sheets, the first one is the data entry and the second one contains all the calculations and confidential info.
I have one staff member that does the data entry but I don't want them to see the 2nd sheet. I know I can hide the sheet then protect the entire workbook which does work, but is there an easier way so that the second person doesn't have to keep hiding/unhiding the 2nd sheet?
It would be perfect if when you tried to click on Sheet2, it asked for a password.
Cheers
Jase

Hey there,

I have been tasked with introducing userforms into an excel sheet and tbh I'm quite amazed that excel has this capability of adding userforms to excel sheets.

Anyway, I have 2 columns of data in an excel sheet and I wish to add this to a userform so that the userform displays the 2 columns beside each other with headings, like a table. The user should then be able to select a particular row and insert it into the specified cell.

I would also like the user to select a row on the table and then be able to bring up another table depending on the row selected...basically so that the user can draw deeper into the information that they require.

I have an example excel sheet where I have 2 sheets. One sheet is the user entry sheet called User Entry Screen. the next sheet is the tables sheet where my tables are held. Once the user selects the cell shown in the example sheet, it should then bring up the user form. the user then, depending on which item clicked, then gets shown the next window with a table and info on it. then user should then be able to select an item and the cells on the user entry screen would then get populated.

Personally I think this is a really tricky challenge and any help with doing this would be extremely appreciated.

I'll post up further comments as I am trying to work my way through it!

Thanks,

Jag

Hi,

I made a budget with many narrow columns and have turned the data into a table. I will only ever filter the data with the left-hand most column. However, all the other columns are filled each with the grey drop-down filter arrow button, and I can no longer see the headings of these columns and frankly seeing 50 little unused arrow buttons is rather ugly. Is there any way to simply remove the filter drop-down buttons on some columns or even all of them, just leaving a filter button at the heading of the first column? I know I can hide the headings, but then I lose sight of the first filter arrow that I use.

Sorry to ask such a bizarre question, but I appreciate your help.

Thanks

Hi-

I am brand new to Mr. Excel and would love some advice.

I searched the boards pretty extensively but could not find what I am looking for...I apologize if this is a duplicate.

I am using Excel 2007

How do you automatically add rows and update values for cells to a linked worksheet in which rows have been added? For example: Sheet 1, columns A & B are linked to Sheet 2, columns A & B. Sheet 2 has values in A1:A5 & B1:B5 and Sheet 1, since it is linked, has the same info. I want to add a row in between 3 & 4 on Sheet 2 and want Sheet 1 to automatically add the same row and update the value of the cell in column A & B.

Any help is greatly appreciated!

John

Hello,

i've got the following problem:

I want users to double-click on a row on a protected sheet and then do some code based on the row-number of the clicked cell. I've protected the sheet because it contains a lot of formula's.

When a user double-clicks a row it triggers the code through the Workbook_SheetBeforeDoubleClick event.
After the code is executed Excel shows a message that the cell that was clicked was protected etc etc.

How can I prevent this message from popping up?

I've already tried
Code:

application.displaywarnings = false

but that didn't work

Thanks

I have never really used VBA and so am completely stuck at this problem. I need to create a macro which auto-populates a master worksheet from the individual user sheets in a shared workbook.

Sheet 1 is the master sheet "Team Stats". There will be an undetermined number of individual worksheets to accomodate new staff.

Each worksheet will be identical, using columns A-I with row 1 having the headings:

Date, Name, Reference, Value, Price, Age, Purchased?, Destination, Add. Products (the last 3 columns will have a drop-down list which will be used to enter data into the cell).

There will be a varying number of rows in each of the individual sheets.

If possible I would like the macro to run every time data is entered into one of the individual worksheets. If this is not then it would be fien to update every time the workbook is opened.

If anyone can help it would really cut down the time I spend collating these stats every day!

I'm having a problem in a workbook with several ActiveX command buttons. I had been using the form control buttons to run macros, but the boss wanted each button to have it's own, different color. So I removed the form control buttons and created new ActiveX command buttons. I got into the button properties and set the background colors. I added the _Click code to run the macros when the user clicked the buttons.

All of the buttons were working fine. Then I saved and closed the workbook and went to lunch. Now when I open the workbook, the buttons don't work! When I click them nothing happens. They appear frozen. They don't even seem to click. No error message. Nothing.

If I right-click the button in Design Mode and select Properties, I get sheet properties not the button properties. I can't seem to locate the command button properties any longer. I still see the button name "cmdButtonGetInfo" and "=EMBED("Forms.CommandButton.1","") in the name box and formula bar. The odd thing is if I create a new button it works fine until I save and close the file. When I reopen the file none of the buttons work.

It's like the buttons are being disabled when I close or open the file. Any suggestions?

We have a workbook that does not allow us to use the Move or Copy command. When we right click on the worksheet and select Move or Copy, we are able to check the box to make a copy, but when we click OK nothing happens.

We have checked to make sure that the workbook and worksheet:
1. Are not protected
2. That there are no hidden worksheets
3. That there are not worksheets that exist with the same name
4. That not all the worksheets are selected

There are only two worksheets in this workbook.

Any ideas of why we are unable to make a copy of this worksheet within the same workbook or to another workbook?