Clickable Email Address In Userform

Hey there,

I have been tasked with introducing userforms into an excel sheet and tbh I'm quite amazed that excel has this capability of adding userforms to excel sheets.

Anyway, I have 2 columns of data in an excel sheet and I wish to add this to a userform so that the userform displays the 2 columns beside each other with headings, like a table. The user should then be able to select a particular row and insert it into the specified cell.

I would also like the user to select a row on the table and then be able to bring up another table depending on the row selected...basically so that the user can draw deeper into the information that they require.

I have an example excel sheet where I have 2 sheets. One sheet is the user entry sheet called User Entry Screen. the next sheet is the tables sheet where my tables are held. Once the user selects the cell shown in the example sheet, it should then bring up the user form. the user then, depending on which item clicked, then gets shown the next window with a table and info on it. then user should then be able to select an item and the cells on the user entry screen would then get populated.

Personally I think this is a really tricky challenge and any help with doing this would be extremely appreciated.

I'll post up further comments as I am trying to work my way through it!

Thanks,

Jag

I have a UserForm with several fields on it: 5 are 'required' and the other 6 are 'optional'. If a user doesn't enter a value for ALL of the 5 'required' fields, how do I get the code to return the user to the UserForm (with, I assume, the values they already entered, still showing)?

I have the AutoOpen code that starts things off, and then, in turn, loads the UserForm with the fields that need to be populated.

I can't figure out how to route the user back to the UserForm, to enter the 'missed' data.

I am looking for the code to select the visible data after applying a data filter. Actually I know how to select the data after applying the data filter but the issue is I am not able to exclude the header row and give the target range as used (non-blank) rows only!!

I am using below code to Select the Visible rows in the target range:

Code:

Range("A:p").SpecialCells(xlCellTypeVisible).Select

Problems in this code a

1) after applying the filter, while selecting the data it is selecting all the rows in given range till last row on the workbook. I need this to select the the data only till the last used row in the given range.

2) It is not possible to provide the address of the first row after we apply the filter since the first row address may change depending on the values in the table.

E.g. 1st time when I am running the macro the first row in the visible filtered data is starting at Cell address A4 and next time when I will run the macro it may be A6

3) The Code is also selecting the 1st row which is a header row. How can we exclude it from selection.

Some one please revert with the solution.
Thanks in advance.

I added a print button to my userform

Code:

Private Sub btn1_Click()
UserForm1.PrintForm
End Sub

This prints out the userform as I would like, however it autoprints to the default printer and doesn't allow any printing options so I can't select to "print to one page". So as of now it is only printing out half my form and cutting off the rest.

Any suggestions?

I am trying to insert a range of cell in the body of an outlook email with the same format. The code I am using now is below and it does insert anything in the email body.

Code:

Sub Mail()
Dim OutApp As Object
    Dim OutMail As Object
    Set OutApp = CreateObject("Outlook.Application")
    OutApp.Session.Logon
    Set OutMail = OutApp.CreateItem(0)
    On Error Resume Next
    With OutMail
        .To = "cbelcher@jpfryelaw.com"
        .CC = ""
        .BCC = ""
        .Subject = "Burden Report"
        .Body = ActiveSheet.Range("A1:D12")
        .Attachments.Add ("C:\Documents and   Settings\cbelcher\Desktop\Burden Report.xls")
End With
    On Error GoTo 0
    Set OutMail = Nothing
    Set OutApp = Nothing
    Set objMsg = Nothing
End Sub

Hi
I am a new user and trying to setup a database in excel. I can select all addresses and copy but when trying to paste into excel it does so in 1 cell.

Is there a way I can paste the separate email id's into individual cells so I don't have to do it individually?

Many thanks
Patrick

Hi,

This is a very basic question, but i have been struggling for hours, so I must ask.

I I trying to simply fill a combobox on a userform from a named range on a sheet, I want to populate the combobox as soon as the userform starts. (I launch the userform from a button on the sheet) Where must I place the code? and will this code work?
Code:

Sub Button1_Click()
Set UserForm1.combobox1.List = Sheets("Sheet1").Range("MyRange")
UserForm1.Show
End Sub

I am very new to vba, so please excuse my ignorance,
any help would be greatly appreciated

regards
jim

Hi,

I have the following code to put data from a VBA userform into Excel

Dim Sh As Worksheet
Dim Rng As Range
Set Sh = ActiveSheet
Set Rng = Sh.Range("A65536").End(xlUp).Offset(1, 0)
With Rng
.Cells(1, 1) = Surname.Text
.Cells(1, 2) = forename.Text
.Cells(1, 3) = datein.Text
.Cells(1, 4) = origin.Text
.Cells(1, 5) = Addressee.Value
.Cells(1, 6) = usual.Value
.Cells(1, 7) = dateto.Text
.Cells(1, 8) = permission.Value
.Cells(1, 9) = dateseen.Text
.Cells(1, 10) = requestview.Value
.Cells(1, 11) = Invoice.Value
.Cells(1, 12) = notes.Text
.Cells(1, 13) = datecompleted.Text
.Cells(1, 14) = holdsend.Value
.Cells(1, 15) = fee.Text
.Cells(1, 16) = notes2.Text
.Cells(1, 17) = dateseen.Text
.Cells(1, 18) = invoicesent.Text
.Cells(1, 19) = Paid.Text
.Cells(1, 20) = Complete.Value

End With

What I want to do next is click on the surname on the speadsheet and call up the userform with the fields complete for that person. I would also like to be able to edit/update the form and update the information on the speadsheet accordingly.

Any help would be greatly appreciated!

Many thanks!

Hello All,

I need a macro enabled file to send HTMLbody email with pre populated text to list of receipents.

Any Idea How can i do?

Many thanks
Ben

Hello,

I'm pretty new at VBA and was wondering if you could help me out on this:

I have created a VBA userform but will need to have it used by at least 5 users. My question is, can it be done with all users working at the same time and when saving their work all data entered will go to one master excel sheet? if yes, would you be kind enough to share the code?
MS Access is not an option for me so I was wondering if you could help me do this in excel.

thank you so much and would really appreciate to hear from anyone soon.

Is there a way that will run the code from a button when the enter key is pressed. Currently the enter key moves to the next text box in the user form.

I have a simple address book spreadsheet. I would like to create a Search
form, where the user can enter the Last Name of the person they are searching
for.

Hi Guys,

Could you be so kind as to provide some code that will enable me to display a text box on a userform rounded up to 1 decimal place.

Where am I going wrong....
it calculates the number entered in textbox1 and divides it by a value that changes in cell O26 but the answer is in about 8 or more decimel places.
Only need like 65.3 as an answer not 65.277756942

This is the code ive used.

Private Sub CommandButton1_Click()

TextBox2.Value = Val(TextBox1.Value) / Range("O26").Value

End Sub

Okay, so I tried (for hours) to find a solution to this and have finally gotten frustrated to the point where i think asking here will be my best bet.


Basically I want to export data from excel worksheets to various places on a word document I had. I have created a word template as well as bookmarks for that template, as that seems to be the recommendation for performing such a task with excel.

My problem is ... Now what?

I basically have 1 constant worksheet that contains all my affiliates info (Name, Address etc), which i'd like to use to populate some bookmarks in my word template, and then i have another worksheet for the previous month, indicating sales etc for that affiliate. I intend on adding a new worksheet every month that i would use to create new invoices.

Furthermore, i'd really like to be able to update a new file (or perhaps a new page on the same file) for each company with the use of a button, similar to the one's you'd see in an access form.

Can anyone help? Let me know if you need me to clarify.

Thanks!

Matt

Below is the code I am using. I am trying to change the subject to show the value of a cell.

Code:

 
    With OutMail
        .To = "name@name.com"
        .CC = ""
        .BCC = ""
        .Subject = "Attrition for" & Range("c5")
        .Body = ""
        .Attachments.Add wb2.FullName

When it sends it does not show the name in c5.
It just reads "Attrition for"

Should there be a different code?