Synchronized Scrolling Of Side-by-side Windows? |
Synchronized Scrolling Of Side-by-side Windows? - Excel |
|
Gents and ladies,
I was recently shown by "Gerald Higgins" (a helpful poster on this forum)how to look at 2 sheets within the same file, side by side. He showed me the feature in this post here....
http://www.mrexcel.com/board2/viewto...369&highlight=
Now i need to find a way to scroll both sheets in a synchronized fashion. In other words, I would like to tile them left and right of eachtoher. Then align them in some fashion (for this example, lets say line 32 on the left side is directly aligned to line 32 on the right side). Then when i scroll one of them, the other one scrolls identically, line for line.
as it stands now, i have to scroll all over the place to find something in the first sheet, and then go scroll the second shet until i find the samer section. in other words, both sheets are formatted exactly the same.
Any ideas would be apprecaited. Just looking for an efficiency trick here. scrolling them both is silly and time consuming.
I was recently shown by "Gerald Higgins" (a helpful poster on this forum)how to look at 2 sheets within the same file, side by side. He showed me the feature in this post here....
http://www.mrexcel.com/board2/viewto...369&highlight=
Now i need to find a way to scroll both sheets in a synchronized fashion. In other words, I would like to tile them left and right of eachtoher. Then align them in some fashion (for this example, lets say line 32 on the left side is directly aligned to line 32 on the right side). Then when i scroll one of them, the other one scrolls identically, line for line.
as it stands now, i have to scroll all over the place to find something in the first sheet, and then go scroll the second shet until i find the samer section. in other words, both sheets are formatted exactly the same.
Any ideas would be apprecaited. Just looking for an efficiency trick here. scrolling them both is silly and time consuming.
Excel VBA Course - From Beginner to Expert
200+ Video Lessons 50+ Hours of Instruction 200+ Excel Guides
Become a master of VBA and Macros in Excel and learn how to automate all of your tasks in Excel with this online course. (No VBA experience required.)
(80% Discount Ends Soon!)
Similar Topics
Hi All,
Random question i have a large Excel Workbook (which is protected) and has over five sheets on it - however one sheet has randomly decided not to scroll... yes i know sounds random! If i use the cursor and down arrows the selection just disappears off the screen.
The page will scroll if i filter by one field, but not if i select (All) for all filters.
All other worksheets scroll fine.
Any suggestions?
Thanks in advance.
Cheers Kaite
Random question i have a large Excel Workbook (which is protected) and has over five sheets on it - however one sheet has randomly decided not to scroll... yes i know sounds random! If i use the cursor and down arrows the selection just disappears off the screen.
The page will scroll if i filter by one field, but not if i select (All) for all filters.
All other worksheets scroll fine.
Any suggestions?
Thanks in advance.
Cheers Kaite
Hi
In excel i have a sheet open with about 30 columns in it. I try to use the scroll bar to move to the right and nothing happens apart from the scroll bar moves along. If i use the right button on the keyboard the scroll bar moves but i cannot see the columns I want. I cannot see anything that would of caused this.
Can anyone help?
Thanks
In excel i have a sheet open with about 30 columns in it. I try to use the scroll bar to move to the right and nothing happens apart from the scroll bar moves along. If i use the right button on the keyboard the scroll bar moves but i cannot see the columns I want. I cannot see anything that would of caused this.
Can anyone help?
Thanks
I have a weird one here. I cannot scroll up or down on a particular worksheet. All the other sheets in the workbook operate successfully, but this one appears to be locked. I have tried both the right hand scroll bar and the mouse. The indicator on the scroll bar moves but the page is "stuck". I have copied it out to a new workbook and this is consistent behavior here too.
Cheers,
Doug
Cheers,
Doug
Hi there. I know it sound like a really simple thing but its really stumped me.
Instead of the y axis being on the left hand side, i wish for it to cut at 0,0. I have positive and negative values and I need it to be in the centre instead of on the left.
I have tried formatting both the axis and it would appear that the x axis already cuts the y axis in the right posistion so i need to format the x axis to make the y axis cut it at 0,0. I have already tried typing in 0 instead of 1 and it keeps saying it need to be number more than or equal to 1.
Any help would be greatly appreciated.
Nicole
Instead of the y axis being on the left hand side, i wish for it to cut at 0,0. I have positive and negative values and I need it to be in the centre instead of on the left.
I have tried formatting both the axis and it would appear that the x axis already cuts the y axis in the right posistion so i need to format the x axis to make the y axis cut it at 0,0. I have already tried typing in 0 instead of 1 and it keeps saying it need to be number more than or equal to 1.
Any help would be greatly appreciated.
Nicole
Hi all,
I'm trying to extract all the text in a cell which is on the right side of a comma (,)
Currently I am using this formula,
=RIGHT(C1,FIND(",",C1)-1)
However it sometimes is missing some of the data after the , and sometimes pulling a few characters before the ,
any suggestions on how to correct my formula please?
Thanks in advance.
I'm trying to extract all the text in a cell which is on the right side of a comma (,)
Currently I am using this formula,
=RIGHT(C1,FIND(",",C1)-1)
However it sometimes is missing some of the data after the , and sometimes pulling a few characters before the ,
any suggestions on how to correct my formula please?
Thanks in advance.
I am using below code, but it only untill 19,999. Amount from 20,000 and above only show thousand? Please help!
For 19,999 it show
Ringgit Malaysia : Nineteen Thousand Nine Hundred NinetyNine Only
For 20,000 and above it show
Ringgit Malaysia : Thousand Only
Code as below:
Function SpellNumber(amt As Variant) As Variant
Dim FIGURE As Variant
Dim LENFIG As Integer
Dim i As Integer
Dim WORDs(19) As String
Dim tens(9) As String
WORDs(1) = "One"
WORDs(2) = "Two"
WORDs(3) = "Three"
WORDs(4) = "Four"
WORDs(5) = "Five"
WORDs(6) = "Six"
WORDs(7) = "Seven"
WORDs(8) = "Eight"
WORDs(9) = "Nine"
WORDs(10) = "Ten"
WORDs(11) = "Eleven"
WORDs(12) = "Twelve"
WORDs(13) = "Thirteen"
WORDs(14) = "Fourteen"
WORDs(15) = "Fifteen"
WORDs(16) = "Sixteen"
WORDs(17) = "Seventeen"
WORDs(18) = "Eighteen"
WORDs(19) = "Nineteen"
tens(2) = "Twenty"
tens(3) = "Thirty"
tens(4) = "Fourty"
tens(5) = "Fifty"
tens(6) = "Sixty"
tens(7) = "Seventy"
tens(8) = "Eighty"
tens(9) = "Ninety"
FIGURE = amt
FIGURE = Format(FIGURE, "FIXED")
FIGLEN = Len(FIGURE)
If FIGLEN < 12 Then
FIGURE = Space(12 - FIGLEN) & FIGURE
End If
If Val(Left(FIGURE, 9)) > 1 Then
SpellNumber = "Ringgit Malaysia : "
ElseIf Val(Left(FIGURE, 9)) = 1 Then
SpellNumber = "Ringgit Malaysia "
End If
For i = 1 To 3
If Val(Left(FIGURE, 2)) < 20 And Val(Left(FIGURE, 2)) > 0 Then
SpellNumber = SpellNumber & WORDs(Val(Left(FIGURE, 2)))
ElseIf Val(Left(FIGURE, 2)) > 19 Then
Ntow = Ntow & tens(Val(Left(FIGURE, 1)))
SpellNumber = SpellNumber & WORDs(Val(Right(Left(FIGURE, 2), 1)))
End If
If i = 1 And Val(Left(FIGURE, 2)) > 0 Then
SpellNumber = SpellNumber & " Crore "
ElseIf i = 2 And Val(Left(FIGURE, 2)) > 0 Then
SpellNumber = SpellNumber & " Hundred "
ElseIf i = 3 And Val(Left(FIGURE, 2)) > 0 Then
SpellNumber = SpellNumber & " Thousand "
End If
FIGURE = Mid(FIGURE, 3)
Next i
If Val(Left(FIGURE, 1)) > 0 Then
SpellNumber = SpellNumber & WORDs(Val(Left(FIGURE, 1))) + " Hundred "
End If
FIGURE = Mid(FIGURE, 2)
If Val(Left(FIGURE, 2)) < 20 And Val(Left(FIGURE, 2)) > 0 Then
SpellNumber = SpellNumber & WORDs(Val(Left(FIGURE, 2)))
ElseIf Val(Left(FIGURE, 2)) > 19 Then
SpellNumber = SpellNumber & tens(Val(Left(FIGURE, 1)))
SpellNumber = SpellNumber & WORDs(Val(Right(Left(FIGURE, 2), 1)))
End If
FIGURE = Mid(FIGURE, 4)
If Val(FIGURE) > 0 Then
SpellNumber = SpellNumber & " And Cents "
If Val(Left(FIGURE, 2)) < 20 And Val(Left(FIGURE, 2)) > 0 Then
SpellNumber = SpellNumber & WORDs(Val(Left(FIGURE, 2)))
ElseIf Val(Left(FIGURE, 2)) > 19 Then
SpellNumber = SpellNumber & tens(Val(Left(FIGURE, 1)))
SpellNumber = SpellNumber & WORDs(Val(Right(Left(FIGURE, 2), 1)))
End If
End If
FIGURE = amt
FIGURE = Format(FIGURE, "FIXED")
If Val(FIGURE) > 0 Then
SpellNumber = SpellNumber & " Only "
End If
End Function
For 19,999 it show
Ringgit Malaysia : Nineteen Thousand Nine Hundred NinetyNine Only
For 20,000 and above it show
Ringgit Malaysia : Thousand Only
Code as below:
Function SpellNumber(amt As Variant) As Variant
Dim FIGURE As Variant
Dim LENFIG As Integer
Dim i As Integer
Dim WORDs(19) As String
Dim tens(9) As String
WORDs(1) = "One"
WORDs(2) = "Two"
WORDs(3) = "Three"
WORDs(4) = "Four"
WORDs(5) = "Five"
WORDs(6) = "Six"
WORDs(7) = "Seven"
WORDs(8) = "Eight"
WORDs(9) = "Nine"
WORDs(10) = "Ten"
WORDs(11) = "Eleven"
WORDs(12) = "Twelve"
WORDs(13) = "Thirteen"
WORDs(14) = "Fourteen"
WORDs(15) = "Fifteen"
WORDs(16) = "Sixteen"
WORDs(17) = "Seventeen"
WORDs(18) = "Eighteen"
WORDs(19) = "Nineteen"
tens(2) = "Twenty"
tens(3) = "Thirty"
tens(4) = "Fourty"
tens(5) = "Fifty"
tens(6) = "Sixty"
tens(7) = "Seventy"
tens(8) = "Eighty"
tens(9) = "Ninety"
FIGURE = amt
FIGURE = Format(FIGURE, "FIXED")
FIGLEN = Len(FIGURE)
If FIGLEN < 12 Then
FIGURE = Space(12 - FIGLEN) & FIGURE
End If
If Val(Left(FIGURE, 9)) > 1 Then
SpellNumber = "Ringgit Malaysia : "
ElseIf Val(Left(FIGURE, 9)) = 1 Then
SpellNumber = "Ringgit Malaysia "
End If
For i = 1 To 3
If Val(Left(FIGURE, 2)) < 20 And Val(Left(FIGURE, 2)) > 0 Then
SpellNumber = SpellNumber & WORDs(Val(Left(FIGURE, 2)))
ElseIf Val(Left(FIGURE, 2)) > 19 Then
Ntow = Ntow & tens(Val(Left(FIGURE, 1)))
SpellNumber = SpellNumber & WORDs(Val(Right(Left(FIGURE, 2), 1)))
End If
If i = 1 And Val(Left(FIGURE, 2)) > 0 Then
SpellNumber = SpellNumber & " Crore "
ElseIf i = 2 And Val(Left(FIGURE, 2)) > 0 Then
SpellNumber = SpellNumber & " Hundred "
ElseIf i = 3 And Val(Left(FIGURE, 2)) > 0 Then
SpellNumber = SpellNumber & " Thousand "
End If
FIGURE = Mid(FIGURE, 3)
Next i
If Val(Left(FIGURE, 1)) > 0 Then
SpellNumber = SpellNumber & WORDs(Val(Left(FIGURE, 1))) + " Hundred "
End If
FIGURE = Mid(FIGURE, 2)
If Val(Left(FIGURE, 2)) < 20 And Val(Left(FIGURE, 2)) > 0 Then
SpellNumber = SpellNumber & WORDs(Val(Left(FIGURE, 2)))
ElseIf Val(Left(FIGURE, 2)) > 19 Then
SpellNumber = SpellNumber & tens(Val(Left(FIGURE, 1)))
SpellNumber = SpellNumber & WORDs(Val(Right(Left(FIGURE, 2), 1)))
End If
FIGURE = Mid(FIGURE, 4)
If Val(FIGURE) > 0 Then
SpellNumber = SpellNumber & " And Cents "
If Val(Left(FIGURE, 2)) < 20 And Val(Left(FIGURE, 2)) > 0 Then
SpellNumber = SpellNumber & WORDs(Val(Left(FIGURE, 2)))
ElseIf Val(Left(FIGURE, 2)) > 19 Then
SpellNumber = SpellNumber & tens(Val(Left(FIGURE, 1)))
SpellNumber = SpellNumber & WORDs(Val(Right(Left(FIGURE, 2), 1)))
End If
End If
FIGURE = amt
FIGURE = Format(FIGURE, "FIXED")
If Val(FIGURE) > 0 Then
SpellNumber = SpellNumber & " Only "
End If
End Function
I am puzzled by a thin black line (that looks like a border line) on a spreadsheet that I am unable to remove, whatever I do. It starts halfway across column B and stops just at the end of column Z.
It is not a border line.
It is not a page break.
If I delete the rows it appears on it remains visible.
It is not an object floating on top of the spreadsheet.
Any ideas?
Thanks.
It is not a border line.
It is not a page break.
If I delete the rows it appears on it remains visible.
It is not an object floating on top of the spreadsheet.
Any ideas?
Thanks.
I have a graph with various information in it. One is a line graph that tracks hours used in that department per month. The problem is that when it gets to the last month, and there is not yet data for future months, the line goes down to Zero (leavin this big diagonal line that makes the data look funny). I need this line to stop on the last month there is data for. (I do not manually enter the data, it is a formula that I do not wish to delete.) I know I can manually move the data that the line is pulling to make it stop on the last month, but I have a graph for 36 different departments and that's a pain to have to manually adjust 36 graphs each month. Is there a way to tell the line to stop if there is no data? Thanks!!
Hello.
I have two huge excel files, with many rows and columns, they "should" look the same.
But I need to find out if anything has been added or removed from the second one compared to the first one.
Which is the easiest way to accomplish this?
Searched this forum and Google but couldn't find what i was looking for.
Thanks in advance!
I have two huge excel files, with many rows and columns, they "should" look the same.
But I need to find out if anything has been added or removed from the second one compared to the first one.
Which is the easiest way to accomplish this?
Searched this forum and Google but couldn't find what i was looking for.
Thanks in advance!
Morning all,
Say I had a line graph for 4 years and I wanted it to be a solid line for the first three and a dashed line for the last one, is that possible?
Many thanks for your help
Say I had a line graph for 4 years and I wanted it to be a solid line for the first three and a dashed line for the last one, is that possible?
Many thanks for your help
So I've got some data, which has the approximate form of a sine function. I want to find all the x-axis intercepts. I tried using the intercept function and swapping around the y values for the x values, but it only returns 1 value (so I'd guess it uses a linear regression to estimate a single line through the axis).
I was thinking of trying a nested if/and statement but I haven't quite figured out how to do it. Basically I want to identify the two values where it switches from positive to negative and also indentify the values where it goes negative to positive, I can then fit a straight line between them to find a better approximation of the intercept (though it might not be necessary). Preferably I'd like it all one function as I'm not doing it in VBA (I might do later though, we'll see).
Can anyone suggest how I'd find these value or the x-intercept. Any help would be greatly appreciated.
I was thinking of trying a nested if/and statement but I haven't quite figured out how to do it. Basically I want to identify the two values where it switches from positive to negative and also indentify the values where it goes negative to positive, I can then fit a straight line between them to find a better approximation of the intercept (though it might not be necessary). Preferably I'd like it all one function as I'm not doing it in VBA (I might do later though, we'll see).
Can anyone suggest how I'd find these value or the x-intercept. Any help would be greatly appreciated.
I have searched and read all the help files. I find the properties of
an object, I see how I can "lock", "size and move with cells" or "not
move with cells". No matter what I select, the object moves off the
screen, when the user, scrolls to the right of the spreadsheet.
Is there a way to lock the position, let's say , in the upper right
corner and have it stay there?
This would be quite useful for an EXIT button, that I have created,
that will close the program without saving (it's a read-only file.)
Thanks to all the wonderful people here that have been so helpful and
give us their valuable insight and time.
Jo
an object, I see how I can "lock", "size and move with cells" or "not
move with cells". No matter what I select, the object moves off the
screen, when the user, scrolls to the right of the spreadsheet.
Is there a way to lock the position, let's say , in the upper right
corner and have it stay there?
This would be quite useful for an EXIT button, that I have created,
that will close the program without saving (it's a read-only file.)
Thanks to all the wonderful people here that have been so helpful and
give us their valuable insight and time.
Jo
How do I restrict what I see on my screen (and specifically, limit the scroll
feature) to the rows and columns I'm actually using in an Excel 2003 Pro
spreadsheet?
feature) to the rows and columns I'm actually using in an Excel 2003 Pro
spreadsheet?
Hey everyone,
I'm really hoping someone can help me with this...
I need to plot percentages over time in a line graph in excel. I don't want to have to do a percentage equation in the spreadsheet, I just want excel to take two sets of values and display the percentage in the chart. For example, I need B1 as a percentage of B2 for week 1, C1 as a percentage of C2 for week 2, etc....
Can someone please offer a suggestion for how to do this? I would really appreciate it.
Also, would it be possible to link data from other sheets in the workbook into one single chart?
I'm really hoping someone can help me with this...
I need to plot percentages over time in a line graph in excel. I don't want to have to do a percentage equation in the spreadsheet, I just want excel to take two sets of values and display the percentage in the chart. For example, I need B1 as a percentage of B2 for week 1, C1 as a percentage of C2 for week 2, etc....
Can someone please offer a suggestion for how to do this? I would really appreciate it.
Also, would it be possible to link data from other sheets in the workbook into one single chart?
I have a long list of item descriptions that I need to filter down to descriptions containing words like "valve" or "ring" or "root" or "epic" (17 key words in all). The basic custom filter looks like it only lets me filter for 2 words.
I have some experience working with advanced filter for things like >100 but that's about it. Any help with this would be so appreciated.
I have some experience working with advanced filter for things like >100 but that's about it. Any help with this would be so appreciated.
Hello
I'm quite experienced Excel user. I've never come across this problem but tinkering in every conceivable way within Excel settings and the solution has eluded me.
I have added a worksheet created elsewhere (it is a form I need printing, with the data coming from 2 sheets I have created from scratch) which has pre formatted cells for Date and Client Name etc.
When I try to reference the cell in this added sheet from my 2 sheets, instead of the result, it always displays the formula, not the result.
I have tried doing it from one of my sheets to reference to this new, and that displays the result and not formula. I can't imagine why it's doing this and I've never seen it happen before.
Formatting cells, giving cells names rather than the usually adequate of reference to the Cell Number doesn't change things. I wonder if I've picked up some legacy protection from the original form but can't see anywhere in the tools etc that's obvious.
There's about 50+ cells that need referencing and I got to get this done for work.
Please help me. This is my first need to post on a Excel Forum as I've always found help or answers from other peeps or internet but this one is making me scratch my head big time.
I'm quite experienced Excel user. I've never come across this problem but tinkering in every conceivable way within Excel settings and the solution has eluded me.
I have added a worksheet created elsewhere (it is a form I need printing, with the data coming from 2 sheets I have created from scratch) which has pre formatted cells for Date and Client Name etc.
When I try to reference the cell in this added sheet from my 2 sheets, instead of the result, it always displays the formula, not the result.
I have tried doing it from one of my sheets to reference to this new, and that displays the result and not formula. I can't imagine why it's doing this and I've never seen it happen before.
Formatting cells, giving cells names rather than the usually adequate of reference to the Cell Number doesn't change things. I wonder if I've picked up some legacy protection from the original form but can't see anywhere in the tools etc that's obvious.
There's about 50+ cells that need referencing and I got to get this done for work.
Please help me. This is my first need to post on a Excel Forum as I've always found help or answers from other peeps or internet but this one is making me scratch my head big time.
Hello,
Firstly i haven't used excel to a great extent since my college days. So i'm having to re-learn 99.9% of everything i once new...
I am volunteering for a non profit organization and trying to create a reservation system for the rooms that they have - kind of like hotel software, but in excel (i did a similiar thing in college but for plane seats)
Please find it attached.
What i need it to do:
Copy all of the info from the main page to the guest lit (a new row each time).
From the guest list to the Gannt chart - i did a few tutorials on dynamic gantt charts using conditional formatting but cannot get them to work when based on data on a different worksheet.
Finaly is there a way to check for availabilty on any given date?
if just someone could point me in the right direction, i would be appreciate it so much words can't express!!!
Best Regards,
Jamie
P.S for the calender drop down on the main page, i'm using 'microsoft time & date picker 6.0)
http://www.2shared.com/file/6521961/...ibsV05b32.html - pop ups on this site
http://www.easy-share.com/1906519167/RibsV0.5b3.2.xlsm - same file, better website
Firstly i haven't used excel to a great extent since my college days. So i'm having to re-learn 99.9% of everything i once new...
I am volunteering for a non profit organization and trying to create a reservation system for the rooms that they have - kind of like hotel software, but in excel (i did a similiar thing in college but for plane seats)
Please find it attached.
What i need it to do:
Copy all of the info from the main page to the guest lit (a new row each time).
From the guest list to the Gannt chart - i did a few tutorials on dynamic gantt charts using conditional formatting but cannot get them to work when based on data on a different worksheet.
Finaly is there a way to check for availabilty on any given date?
if just someone could point me in the right direction, i would be appreciate it so much words can't express!!!
Best Regards,
Jamie
P.S for the calender drop down on the main page, i'm using 'microsoft time & date picker 6.0)
http://www.2shared.com/file/6521961/...ibsV05b32.html - pop ups on this site
http://www.easy-share.com/1906519167/RibsV0.5b3.2.xlsm - same file, better website
I have a userform containing a multicolumn listbox (ListBox1) and textbox (txtSelectedJobNumber).
When a user clicks on a line in the listbox I want to automatically copy the text in the 3rd column of the selected line to the textbox.
If anyone could provide code which would allow me to do this I would be grateful
Thanks
Colin
When a user clicks on a line in the listbox I want to automatically copy the text in the 3rd column of the selected line to the textbox.
If anyone could provide code which would allow me to do this I would be grateful
Thanks
Colin
Hi,
I have a long list of data validation. I was wondering if there is a way when I clik on the drop down menu and type the first letter, automatically Excel shows all list with that letter.
Right now, I have to click on the drop down menu and scroll manually until I reach that desired list.
Thanks.
I have a long list of data validation. I was wondering if there is a way when I clik on the drop down menu and type the first letter, automatically Excel shows all list with that letter.
Right now, I have to click on the drop down menu and scroll manually until I reach that desired list.
Thanks.
Hello, I'm trying to count the number of times a name appears across multiple worksheets but I can't seem to figure it out.
I have 6 sheets to count and all the names are in column A (from A1:A100) on each sheet. The names are not in a particular order.
On sheet 7 I want to have a cell beside each persons name that counts the number of times their name appeared on the other 6 sheets.
For example Sheet 7 (called total) would have
Joe 5 (where 5 is the outcome of the formula I'm looking for to count all the times "Joe" appears on sheets 1-6).
I have it counting per sheet with =COUNTIF(A1:A130,"name") but this is not quite what I am looking for.
Thanks in advance for any advice.
Edit: I am using Excel 2007 w/ windows XP
I have 6 sheets to count and all the names are in column A (from A1:A100) on each sheet. The names are not in a particular order.
On sheet 7 I want to have a cell beside each persons name that counts the number of times their name appeared on the other 6 sheets.
For example Sheet 7 (called total) would have
Joe 5 (where 5 is the outcome of the formula I'm looking for to count all the times "Joe" appears on sheets 1-6).
I have it counting per sheet with =COUNTIF(A1:A130,"name") but this is not quite what I am looking for.
Thanks in advance for any advice.
Edit: I am using Excel 2007 w/ windows XP