Turn A Vba Array Into Chart

Regarding Charts in Excel:

Is there a way to have the Min and Max values adjusted dynamically for the Scale of the values being displayed ??

I know that I can use named ranges to display various sections of data -- month by month, or quarter by quarter, for example.

But when the value of these ranges vary greatly from section to section I end of having to manually go and adjust the Min and Max values of the chart scale.

For example, if I was looking at a graph of the S&P 500's prices last November, a Min and Max range of 750 to 1200 would be fine. But if I had a dynamic range established and scrolled over to view the S&P 500's prices for this past February, I would need a Min and Max range of around 650 to 850.

Is there a way to have these Min & Max values adjust automatically depending on the values being displayed ??

Thanks

StanSz

I have been using Excel (XP) to make a text chart for several months. Some of
my text entries are rather lengthy. The past two weeks these lengthy entries
are showing up as pound signs (#########) when I click off the cell. I know
the text will fit in the cell, and the problem isn't solved by making the
cell bigger or using a little bit less text. I have the cells formatted as
"text" and "wrap to fit". I have printed the pages and the printed version
also has pound signs. I just want my text to show up!

I have a very simple pivot table that I am trying to use as a data source for a VLOOKUP request. Unfortunately, every time I do it I get the result #NA. I have tried recreating the results from the pivot table in the worksheet next to it, and am able to use VLOOKUP on them successfully, but as soon as I point the VLOOKUP array to the pivot table, I get the #NA result

Can VLOOKUP be used on pivot tables? If so, is there any special syntax I need to use?

Thanks

Hello,

Firstly i haven't used excel to a great extent since my college days. So i'm having to re-learn 99.9% of everything i once new...

I am volunteering for a non profit organization and trying to create a reservation system for the rooms that they have - kind of like hotel software, but in excel (i did a similiar thing in college but for plane seats)

Please find it attached.

What i need it to do:

Copy all of the info from the main page to the guest lit (a new row each time).

From the guest list to the Gannt chart - i did a few tutorials on dynamic gantt charts using conditional formatting but cannot get them to work when based on data on a different worksheet.

Finaly is there a way to check for availabilty on any given date?

if just someone could point me in the right direction, i would be appreciate it so much words can't express!!!

Best Regards,

Jamie

P.S for the calender drop down on the main page, i'm using 'microsoft time & date picker 6.0)

http://www.2shared.com/file/6521961/...ibsV05b32.html - pop ups on this site

http://www.easy-share.com/1906519167/RibsV0.5b3.2.xlsm - same file, better website

I have a graph with various information in it. One is a line graph that tracks hours used in that department per month. The problem is that when it gets to the last month, and there is not yet data for future months, the line goes down to Zero (leavin this big diagonal line that makes the data look funny). I need this line to stop on the last month there is data for. (I do not manually enter the data, it is a formula that I do not wish to delete.) I know I can manually move the data that the line is pulling to make it stop on the last month, but I have a graph for 36 different departments and that's a pain to have to manually adjust 36 graphs each month. Is there a way to tell the line to stop if there is no data? Thanks!!

I would like the contents of a selected active cell to be displayed in a certain other cell, say R4. When another cell is selected and active, that cell's contents should be displayed.

I have an array of 9 columns and 20 rows with equity symbols and conditionally formatted to show the severity of price movement in either direction.

Instead of typing in the value of whatever cell a trader is looking at I would like for them to just be able to click on the cell and have that symbol copied into R4 so some detailed information can be displayed for them.

Can't find a thing about this on any forum or msdn.

Hope I'm explaining this at least somewhat clearly.

Thanks.

Corporate edict.

I have a worksheet that is locked and protected now, except for cells in a certain collumn. I have named the cells in that column "MS96A".

If a user enters a date in a cell or range of cells anywhere in the column, the changed cells also need to be locked and protected (Once they enter a date, it is not allowed EVER to be changed again. Corporate requirement! *Shrug*).

What I am looking for is this. If the user selects that cell again, they will get the usual pop-up message, "The cell or chart that you are trying to change is protected..."

I think I am close, but I am getting an "End If without block If" error on the If Clause.


Sub Worksheet_Change(ByVal Target As Excel.Range)
Dim MRange As Range
Set MRange = Range("MS96A")
' If Not Intersect(Target, MRange) Is Nothing Then For Each cell In MRange Sheets("Sheet1").Unprotect Password:="temp"
cell.Interior.ColorIndex = 3
cell.Font.Color = vbBlack
Selection.Locked = True
Selection.FormulaHidden = False
Next cell
ActiveSheet.Protect Password:="temp", _
DrawingObjects:=False, _
Contents:=True, _
Scenarios:=False
ActiveSheet.EnableSelection = xlUnlockedCells
End Sub

Hi-

I am brand new to Mr. Excel and would love some advice.

I searched the boards pretty extensively but could not find what I am looking for...I apologize if this is a duplicate.

I am using Excel 2007

How do you automatically add rows and update values for cells to a linked worksheet in which rows have been added? For example: Sheet 1, columns A & B are linked to Sheet 2, columns A & B. Sheet 2 has values in A1:A5 & B1:B5 and Sheet 1, since it is linked, has the same info. I want to add a row in between 3 & 4 on Sheet 2 and want Sheet 1 to automatically add the same row and update the value of the cell in column A & B.

Any help is greatly appreciated!

John

This may be less of an Excel question than a general data display question, but I'll try here.

I have 3 variables that I'm charting. I have one on the primary axis and it's values are in the billions. I have one on the secondary axis and it's a percentage. I need to display a 3rd who's value is in the millions. If I put it on the primary axis, you cannot see modest changes.

Is there a tricky way to get all three on one graph? I know I could split on two graphs, so that's my backup plan.

Thanks,

Dave

I am trying to automatically capture and record the date of a cell's last change in value (date stamp). I have an item price list and if a particular cell gets updated I want to automatically record the date of change of that cell. I realize that after I change cell A1 I could tab to cell B1 and enter Ctrl+; but if I have a hundred new prices to enter I don't want to do that (plus me or the data entry person might forget).

For instance,

A B
1 $32.17 8/17/08
2 $43.20 9/12/09

If I go in and update cell A1 to $33.98 today I would like cell B1 to read 2/16/10. But I don't want cell B2 to change.


Thanks

Morning all,

Say I had a line graph for 4 years and I wanted it to be a solid line for the first three and a dashed line for the last one, is that possible?

Many thanks for your help

Hello,

I'm pretty new at VBA and was wondering if you could help me out on this:

I have created a VBA userform but will need to have it used by at least 5 users. My question is, can it be done with all users working at the same time and when saving their work all data entered will go to one master excel sheet? if yes, would you be kind enough to share the code?
MS Access is not an option for me so I was wondering if you could help me do this in excel.

thank you so much and would really appreciate to hear from anyone soon.

Hi,

Recently, I find that the Pivot Table toolbar does not show up when I activate it. I have reinstalled Excel but it still does not show up when I activate it in the Pivot Table. Can someone advise me on what settings I shoudl do to turn it on again ? Thanks.

I have a problem sometimes. I will click on a cell to add information.
The cell turns blue and then wherever I move, it highlights those to.
No matter where I go on the page. If I Alt-Tab and work in another
program on my computer, that excel page keeps highlighting wherever
I move even in those other programs (I know this sounds confusing).
When I return to excel thousands and thousands of cells are blue.


The biggest problem is that the highlighting won't turn off, no matter
what. I can't select anything from the tool bars, do any work on the sheet or close the program.
I can close it only with the task manager but when I open it again,
the cursor is still stuck in the highlighting mode and won't perform any
other functions.

Do you think this is a problem with my computer, the excel program? I have changed my mouse and this didn't help.
Is there some shortcut to turn off this highlight feature other than restarting
my computer. Which is the only current way I can get rid of it.

Thanks for any advice,

Hello, please help me out with this one.

So I am at work workin on this report and I need a function that will make Excel automatically insert the today's date in a cell (let's say D90) when I fill the content of another cell (for example C90) and the that will be inserted will never change. I tried to use the =TODAY( ) function but it keeps updating the date in the cell to the current date if i reopen the worksheet 2 days later. I need the cell to keep in the cell the date of the day when I filled in the content of cell C90 and do not updated it every time i open the document to the actual date.. Thanks in advance!!