Not Saving Named Ranges? |
Not Saving Named Ranges? - Excel |
|
Hello everyone,
I have a weird problem. I have had these workbooks set up for months, and they have about a dozen or so sheets in there. On these sheets I am doing tons of v and h lookups, so I name the ranges to make it easier to decipher.
However, just recently whenever I open the file nothing works; I go to the name manager and, for example, for the named range "rankings" it will point to "=[Rankings]#REF!$D$2:$D$33
So I go and delete all these values, reset them, save it, close, open, and the reference errors are back! No reason that I can see... any advice?
I don't have any macros programmed in, and it's being saved as an .xlsx.
This error also occurs no matter if I save the file to the hard drive, network drive, or a USB key.
Similar Topics
I have a number of different files that I often need to run a macro on. In order for me to do it on the 75-100 files I have at any given time, I need to open one, run the macro, close and save, then open the next one.
Is it possible to write a macro that will start with the first file in a folder, open it and update links, run a macro, save and close, and open the next file in the folder until it has open all the files in the folder.
I have experience with creating macros that reference different workbooks, but not sure how to go about opening files with different filenames (without referencing the exact filename).
I'd like to be able to have basic code for opening, saving and closing, opening next file, saving and closing, etc. and input the macro I'd need to run in each file in the appropriate location. Is this possible? Any help is greatly appreciated!!
Thanks,
Jason
Found the following code and it gets me close, but it copies the cell references, not the values. It also allows me to specify the file name from a cell reference.
I want the new workbook file to simply be saved, not opened, and a message box to display stating where the file was saved (will always be in the same location on the LAN).
What modifications do I make to this to get this to work per above requirements?
Sub CopyMe()
Dim SaveMeAs As String
SaveMeAs = Sheets("Sheet1").Range("B2").Text
Sheets("Sheet3").Copy
ActiveWorkbook.SaveAs Filename:="C:\My Documents\" & SaveMeAs
End Sub
I am working with an Excel spreadsheet and saving it as a .csv file in order to upload to an application that parses out the .csv data as transactions. The system requires .csv files, so this is how I need to save my doc (with this extension). I have been successful at preventing Excel from coverting that long number into scientific format. I have saved as a TXT file, pasted the longer number and it displays correctly. That is all good. But I have to save as a .csv. So if I do that, close the Excel window, and then open again (as the .csv file), the numbers are back to being displayed in scientific format. I have tried creating an Excel doc from scratch and entering text in Text format, to see if this created a cleaner file. But again, the second I save as .csv, close the window and then open that file up again, that dang scientific format is back.
Does anyone have any idea of how to work around this? Once I have successfully gotten the numbers to display as the long-chain number, how can I get them to "stick" so that they don't revert back to scientific format when I reopen the file?
Thanks so much for your help!
I dont want it to actually make the save though as I want the user to have the chance to check that the save location is correct and the option to change the filename if required.
Cheers.
I'm new to macros and would appreciate any help this board can offer. Thanks...
I have a sheet with raw data a sheet with pivot tables a sheet with a dashboard and a simple macro
I don't have any #REF cells either.
Someone has any idea of what could be the problem?
thanks
NA
Every so often when I attempt to save a file, (including save as), Excel won'r let me. By won't let me I mean:
using Save doesn't appear to do anything using Save As doesn't either do anything, the dialog is not displayed and if I am doing via the File menu then the File menu is exited and the previous ribbon tab is displayed (i.ethe one I was on before clicking 'File') if I close the workbook I am prompted to save, close without saving or cancel. Clicking save just invokes the same msgbox again. I can't work out when it goes into this mode. Some days I can work without this problem, other days I encounter this 2 or 3 times.
The only thing I could suspect was I think this started around about the time I installed xlDennis' code library. I have uninstalled the addin and so far so good, but I cannot categorically say that this was the cause.
Anyone have any idea?
Cheers
Jon
Edit: I have read this: http://support.microsoft.com/kb/271513
Doesn't seem to cover the issue I describe
All of the buttons were working fine. Then I saved and closed the workbook and went to lunch. Now when I open the workbook, the buttons don't work! When I click them nothing happens. They appear frozen. They don't even seem to click. No error message. Nothing.
If I right-click the button in Design Mode and select Properties, I get sheet properties not the button properties. I can't seem to locate the command button properties any longer. I still see the button name "cmdButtonGetInfo" and "=EMBED("Forms.CommandButton.1","") in the name box and formula bar. The odd thing is if I create a new button it works fine until I save and close the file. When I reopen the file none of the buttons work.
It's like the buttons are being disabled when I close or open the file. Any suggestions?
I've been getting this error on occasion recently.
- It's a shared document
- There is usually 10-12 people using the file at the same time
I've read on the Microsoft Help site that the issue is that somebody is accessing the file while another is trying to open it.
Is there a way, perhaps through VBA, that I can not allow a user to save while somebody else is opening the document? Other suggestions on how to avoid this error?
Thanks!
But I did so in a beta file (test file). The real file has become so big (103MB!) that Excel cannot even open it anymore! The file contains archive info that we do not have anywhere else.
Is there anyway then to open the file or to reduce its size without opening it (through magics...)? I just honestly don't know how to retrieve that info before deleting that file.
Thank you very much for your help.
Make sense? I'm a bit confused myself. Maybe just a list of basic workbook-switching techniques or commands would be useful.
- Michael
People need to open the file to be able to sign up for various duty rosters.
We would like for the file to open for the first person.
And then for any others after that, get a message that the file is in use
WITHOUT the option to open a read-only copy.
Our staff can't read and they keep opening additional copies of the file!
I have read about sharing the file and I don't think that would make things
any better.
Thanks,
Lynn
When I try to replace all commas (with nothing or with another character), I get the error message "The formula you typed contains an error."
I have tried various formats (text, general, etc.) and various file types (.xls,.xlsx, .csv) and still get the same error.
between Excel workbooks. They can copy and paste between worksheets. When
you highlight the section to copy and then go to the new workbook both the
paste
and paste special are "grayed out". This is true whether you right-click the
mouse, go to the edit menu, or use control keys. This occurs with any data
type and the most simple workbooks. I have seen some suggestions here but
none have worked for this particular problem. I have reset the menus and
renamed the .xlb files and neither helps. You can open the clipboard and the
paste will work, but there is no paste special option. Any help would be
greatly appreciated. Thanks!
ActiveSheet.ExportAsFixedFormat Type:=xlTypePDF, Filename:=Range("H10").Value & Format(Date, "mmdd")
This saves it as the correct cell value + the date, but it saves it to my documents. I need it to save to a shared folder on a network drive.
Any help would be greatly appreciated.
THANKS
Here is my situation. I have been trying to learn macros but have not made one yet. Need your help. Here at work, I have some incompentant computer workers who claim they KNOW MS sooo well and have certificates etc... *COUGH COUGH* ya ok... LMAO
We have a "shared" work book we all work in. It's nothing fancy, just use it as a PO Book but since it is shared some people continue to not save before they add in more work so that they see a "refreshed" copy of the workbook before they start writing in cells that already contain information.
How to I create a macro button at the top of the page that is literally a SAVE button.. instead of them saving by going to File - Save or cntrl+s ??? I just thought that MAYBE having a big button in their face will remind them.
Secondly as back up I was wondering if you can create a macro to do a refresh of everyones screens automatically - say every 2 or 5 mins??? I don't mean a save... but a refresh so the screen actually updates in front of you. (although I will keep this little piece of magic out of their knowledge so they don't rely on it, just though it would be a secondary back up to helping eliminate these mishaps cause we are loosing alot of information by people saving overtop of other peoples work and not caring.)
Thanks so much!!!!! Muchly appriciated.
FORMULA: =sumif(range,criteria,sum_range)
I got it to work, but I have cell ranges to total that are not next to each
other (such as A5:A15 and C5:C15).
When selecting the ranges for the formula, Excel writes them A5:A15,C5:C15
because of the comma (,) between the cell ranges Excel is reading the A5:A15
as the range and C5:C15 as the critera. How can I get this formula to allow
me to select multiple cell ranges?
All help is appreciated.
Thank you.
an object, I see how I can "lock", "size and move with cells" or "not
move with cells". No matter what I select, the object moves off the
screen, when the user, scrolls to the right of the spreadsheet.
Is there a way to lock the position, let's say , in the upper right
corner and have it stay there?
This would be quite useful for an EXIT button, that I have created,
that will close the program without saving (it's a read-only file.)
Thanks to all the wonderful people here that have been so helpful and
give us their valuable insight and time.
Jo