Calculating Selling Price

I have a spreadsheet where I need to calculate the increase in % one year over the other in column D for Eg if Profits are 95415 in Jan 2008 (Column B) and 80215 in Jan 2008 (Column C), then the % Increase will be (95415-80215)/80215 *100

I can calculate the formula for this , but the problem comes where for eg there is a loss in Jan 2008 for -95415 and there was a profit in Jan 2007 for 80215. How do I set up formula to take negatives & positives into account in calculating the increase or decrease/

Your assistance or anybody's on the forum will be greatly appreciated

Regards

Howard

http://www.mrexcel.com/forum/showthr...ghlight=howardneed

I am trying to write a formula that uses both an if statement and a vlookup statement.

It's for a house cleaning price list, with two sets of prices. I want the formula to say if the value in E7 is R, i want to lookup the value for the house in the second column. If the value in the cell is anything else, i want to lookup the value for the house in the third column.

So in sense, my formula should look like =IF (E7=1,"=VLOOKUP(A10,'Clean Prices'!$A$2:$C$58,2,FALSE)","=VLOOKUP(A10,'Clean Prices'!$A$2:$C$58,3,FALSE)")

But it doesn't work. Is it possible to nest a vlookup in an if statement?

Hello,

Firstly i haven't used excel to a great extent since my college days. So i'm having to re-learn 99.9% of everything i once new...

I am volunteering for a non profit organization and trying to create a reservation system for the rooms that they have - kind of like hotel software, but in excel (i did a similiar thing in college but for plane seats)

Please find it attached.

What i need it to do:

Copy all of the info from the main page to the guest lit (a new row each time).

From the guest list to the Gannt chart - i did a few tutorials on dynamic gantt charts using conditional formatting but cannot get them to work when based on data on a different worksheet.

Finaly is there a way to check for availabilty on any given date?

if just someone could point me in the right direction, i would be appreciate it so much words can't express!!!

Best Regards,

Jamie

P.S for the calender drop down on the main page, i'm using 'microsoft time & date picker 6.0)

http://www.2shared.com/file/6521961/...ibsV05b32.html - pop ups on this site

http://www.easy-share.com/1906519167/RibsV0.5b3.2.xlsm - same file, better website

Newbie here and I don't know where to start... I'm trying to set up a macro to when data is pasted to a TEMPLATE worksheet tab it will automatically copy and paste data to another sheet based on the month value.
For example:
If data contains 06/01/2011 in cell A1, then data needs to be pasted to "Jun" worksheet within the same workbook.

Can someone assist or can give some direction? Thank you

I would like to know how to make excel calculate which inventory is left in the FIFO method, quantities that are bought first are the first to be sold. Basically where the quantity and price is derived from.

For example:
APPLE
bought 100 on FEB 1 @$1
bought 500 on FEB 1 @$1
bought 1000 on FEB 10 @$1
sold 300 on FEB 12 @$1.5
bought 100 on FEB 13 @$1.1
sold 100 on FEB 13 @$1.2
bought 1000 on FEB 14 @$1
bought 400 on FEB 15 @$1
sold 2000 on FEB 19 @$1.5

For this, the formula/function would know that:
=>for the 300 sold on FEB 12, 100 bought on FEB 1 is depleted and 200 of the 500 bought on FEB 1 is depleted.
=>for the 100 sold on FEB 13, the 100 bought on FEB 13 is depleted
=>for the 2000 sold on FEB 19, it knows that:
==>the 100 bought on FEB 1, the 200 of the 500 bought on FEB 1, and the 100 bought on FEB 13 is depleted so it can't consider those quantities
==>it would consider the remaining 300 of the 500 bought on FEB 1, 1000 bought on FEB 10, and 700 of the 1000 bought on FEB 14

The remaining quantities that are left would be the remaining 300 of the 1000 bought on Feb 14 and the 400 bought on FEB 15.

I would like to know for each sold transaction, which quantities at which prices on which day were sold.

Thanks in advance!

I am trying to automatically capture and record the date of a cell's last change in value (date stamp). I have an item price list and if a particular cell gets updated I want to automatically record the date of change of that cell. I realize that after I change cell A1 I could tab to cell B1 and enter Ctrl+; but if I have a hundred new prices to enter I don't want to do that (plus me or the data entry person might forget).

For instance,

A B
1 $32.17 8/17/08
2 $43.20 9/12/09

If I go in and update cell A1 to $33.98 today I would like cell B1 to read 2/16/10. But I don't want cell B2 to change.


Thanks

I am trying to calculate time based off a non-conventional quarter hour time system

example;
8:00 to 8:07 = 8.0 hrs
8:08 to 8:23 = 8.25 hrs
8:24 to 8:38 = 8.5 hrs
8:39 to 8:53 = 8.75 hrs
8:53 to 8:59 = 9.0 hrs

I am having trouble writing an equation that would sum the clock-in and clock-out times (2 per day) and display the total time in these quarter hours and adding an additional hour if it is >= to *:53. Any help would be great.

Hi Excel experts,
I am working on a worksheet, and would like to have an entire row transferred to another worksheet based upon a certain cell's value.

Having searched through the many solved threads on this site, I attempted to customize some of the code to my worksheet. Not being proficient in Macro/VBA, I failed. I figured I would ask for help, and see if anyone can provide what I am looking for.

Basically, I am attempting to construct a "work in process" file, and would like all completed work to be deleted from the work in process sheet, and transferred to a sheet that contains a running list of all work completed.

Attached is an example of what I am working on. I would like Column Q (Status) to determine if a row can be moved to a sheet that contains the list of all work completed, and eliminated from the original sheet. Once Status is updated to "Complete", it would be helpful to be able to run a macro/click a button that would perform the transfer.

Can anyone assist?

Thanks!

I just worked with a data set where I needed to create a unique key based on existing information where no unique key was set up as a field. I accomplished it by concatenating (using the & [concatenation] operator) several fields based on what I hypothesized and observed about their content.

I'm thinking there has to be a more automated way to discover the best unique key of existing fields and their data. I thought I'd post this as a challenge because I don't know the "right" (or better) answer.

Anyone have any ideas?

I have never really used VBA and so am completely stuck at this problem. I need to create a macro which auto-populates a master worksheet from the individual user sheets in a shared workbook.

Sheet 1 is the master sheet "Team Stats". There will be an undetermined number of individual worksheets to accomodate new staff.

Each worksheet will be identical, using columns A-I with row 1 having the headings:

Date, Name, Reference, Value, Price, Age, Purchased?, Destination, Add. Products (the last 3 columns will have a drop-down list which will be used to enter data into the cell).

There will be a varying number of rows in each of the individual sheets.

If possible I would like the macro to run every time data is entered into one of the individual worksheets. If this is not then it would be fien to update every time the workbook is opened.

If anyone can help it would really cut down the time I spend collating these stats every day!

I need to create a IF statement where it will count the character length and if not 6 then add leading zeros to field to make a fixed 6 character length .. so if field is 489 then the if statment would make it 000489

Hi,

How do I enter the value in a cell (say B4) into a formula as a constant so it doesn't change when I copy it down the column?

For example,

B4 = 2.4 (a constant)

This is the result I want:

F6 =C8 + B4*4.243

F7 =C9 + B4*4.243

F8 =C10 + B4*4.243

B4 remains constant as I copy F6 down.

What's the correct formula for F6 so I can copy it down and keep B4 fixed?

Thanks.

Hi everyone,

I found an excellent macro this morning that allows the user to filter a pivot table based on the value found in a specific cell. This cell essentially acts as a search bar, allowing the user to type in what they are looking for rather than select it from a drop-down list.

The macro works perfectly for my purposes except in one regard: I can no longer perform a "show all" filter. If I leave the "search bar" cell blank, the pivot table shows nothing. I'm sure that there is an easy fix for this but I'm still learning the basics of how to write and use macros. How can I change the code so that when I leave the cell blank, the pivot table shows all? The search bar cell is D2.

Thanks for your time!

I would like the contents of a selected active cell to be displayed in a certain other cell, say R4. When another cell is selected and active, that cell's contents should be displayed.

I have an array of 9 columns and 20 rows with equity symbols and conditionally formatted to show the severity of price movement in either direction.

Instead of typing in the value of whatever cell a trader is looking at I would like for them to just be able to click on the cell and have that symbol copied into R4 so some detailed information can be displayed for them.

Can't find a thing about this on any forum or msdn.

Hope I'm explaining this at least somewhat clearly.

Thanks.

Hi,

I would like to send SMS from a VBA macro to my mobile phone. Do anyone know how to do this?

I am ready to pay a cost per SMS if necessary.

(I asked the same question at another Excel forum without getting any reply.)