Paste Link But With A Locked ($a$1) Address |
Paste Link But With A Locked ($a$1) Address - Excel |
|
Is there a way to paste a range of cells as links, but have the links use the locked (I don't know the proper term) address of the target cell). I would have said "absolute" reference but the paste link doc already says it uses absolute references.
For example, if I copy cell A2 from sheet1, and I paste as a link, i get the reference sheet1!A2 in the target cell.
Is there any way to get it to paste sheet1!$A$2? I'd like to be able to recopy and paste the link and have it refer to the original A2 but as it is now, the A2 is adjusted to be relative to where I copy it.
Thanks, first time poster here.
( I searched for paste and link but couldn't wade through the 1700+ results.)
For example, if I copy cell A2 from sheet1, and I paste as a link, i get the reference sheet1!A2 in the target cell.
Is there any way to get it to paste sheet1!$A$2? I'd like to be able to recopy and paste the link and have it refer to the original A2 but as it is now, the A2 is adjusted to be relative to where I copy it.
Thanks, first time poster here.
( I searched for paste and link but couldn't wade through the 1700+ results.)
Excel VBA Course - From Beginner to Expert
200+ Video Lessons 50+ Hours of Instruction 200+ Excel Guides
Become a master of VBA and Macros in Excel and learn how to automate all of your tasks in Excel with this online course. (No VBA experience required.)
(80% Discount Ends Soon!)
Similar Topics
We have a number of Excel users in our office who cannot copy and paste
between Excel workbooks. They can copy and paste between worksheets. When
you highlight the section to copy and then go to the new workbook both the
paste
and paste special are "grayed out". This is true whether you right-click the
mouse, go to the edit menu, or use control keys. This occurs with any data
type and the most simple workbooks. I have seen some suggestions here but
none have worked for this particular problem. I have reset the menus and
renamed the .xlb files and neither helps. You can open the clipboard and the
paste will work, but there is no paste special option. Any help would be
greatly appreciated. Thanks!
between Excel workbooks. They can copy and paste between worksheets. When
you highlight the section to copy and then go to the new workbook both the
paste
and paste special are "grayed out". This is true whether you right-click the
mouse, go to the edit menu, or use control keys. This occurs with any data
type and the most simple workbooks. I have seen some suggestions here but
none have worked for this particular problem. I have reset the menus and
renamed the .xlb files and neither helps. You can open the clipboard and the
paste will work, but there is no paste special option. Any help would be
greatly appreciated. Thanks!
Hi,
I use filters a lot at my work. One thing I've noticed is that if I have something filtered and want to copy and paste only what I see from one column to another column right next to it, it will copy what is filtered, but then paste into the unfiltered portion.
Is there some way to copy only what I see when it's filtered, THEN paste only onto the adjancent cells which is also filtered?
For example let's say i have each of the number below in a cell (Fig 1). And then I hide rows 2 -3, so only 1 and 4 is showingI only see 1 & 4 in column A. I want to copy and paste 1 and 4 to the next column over one row so it looks like Fig. 2 when unhidden. Not like Fig. 3.
Fig. 1
1
2
3
4
Fig. 2
1 1
2
3
4 4
Fig. 3
1 1
2 4
3
4
I use filters a lot at my work. One thing I've noticed is that if I have something filtered and want to copy and paste only what I see from one column to another column right next to it, it will copy what is filtered, but then paste into the unfiltered portion.
Is there some way to copy only what I see when it's filtered, THEN paste only onto the adjancent cells which is also filtered?
For example let's say i have each of the number below in a cell (Fig 1). And then I hide rows 2 -3, so only 1 and 4 is showingI only see 1 & 4 in column A. I want to copy and paste 1 and 4 to the next column over one row so it looks like Fig. 2 when unhidden. Not like Fig. 3.
Fig. 1
1
2
3
4
Fig. 2
1 1
2
3
4 4
Fig. 3
1 1
2 4
3
4
I am trying to do a very simple copy and paste of a simple formula in Excel 2007 and nothing seems to be working. Excel will not let me copy and paste a formula and will only paste the value into to workbook. For instance, if I make a very simple spreadsheet such as:
A1 type in 10, A2 type in =A1 (calculated A2 to be 10)
B1 type in 5
And then click the copy on B1, and then click paste special on cell B2, the only options it gives me are text and unicode text and so no matter how I paste, cell b2 will always be populated with a value of 5. I cannot imagine a simpler copy and paste and no matter what I do I can't make this work.
All cells are formatted as general. It seems that all copy and pasting of formulas in my excel has been disabled. If I open any spreadsheet on my computer, I can't copy and paste formulas, but do the exact same thing on the exact same spreadsheet on any other computer and it works no problem.
Any help?
A1 type in 10, A2 type in =A1 (calculated A2 to be 10)
B1 type in 5
And then click the copy on B1, and then click paste special on cell B2, the only options it gives me are text and unicode text and so no matter how I paste, cell b2 will always be populated with a value of 5. I cannot imagine a simpler copy and paste and no matter what I do I can't make this work.
All cells are formatted as general. It seems that all copy and pasting of formulas in my excel has been disabled. If I open any spreadsheet on my computer, I can't copy and paste formulas, but do the exact same thing on the exact same spreadsheet on any other computer and it works no problem.
Any help?
I did a search in here but didn't find an answer so here goes nothing...
I have a spreadsheet with data from A1 to H1 down to A275 to H275. I select all of it, Copy, go into the Sheet2 tab and select A1, Paste Special -> Transpose and it give me the following error message:
Quote:
The information cannot be pasted because the Copy area and the paste area are not the same size and shape. Try one of the following:
- Click a single cell, and then paste.
- Select a rectangle that's the same size and shape, and then paste.
For the life of me, I can't figure out why it's not working! I have done this many times with other spreadsheets. Has anyone ever experienced this? If so, were you able to resolve it and how?
Many Thanks,
Mike
I have a spreadsheet with data from A1 to H1 down to A275 to H275. I select all of it, Copy, go into the Sheet2 tab and select A1, Paste Special -> Transpose and it give me the following error message:
Quote:
The information cannot be pasted because the Copy area and the paste area are not the same size and shape. Try one of the following:
- Click a single cell, and then paste.
- Select a rectangle that's the same size and shape, and then paste.
For the life of me, I can't figure out why it's not working! I have done this many times with other spreadsheets. Has anyone ever experienced this? If so, were you able to resolve it and how?
Many Thanks,
Mike
I was testing the following methods (suggested in another thread) to disable copy/paste on a particular worksheet -- now copy and paste is disabled entirely from Excel and, apparently, from each and every excel workbook I've got. HELP!!!!!
http://www.xcelfiles.com/VBA_Quick13.html
http://www.mrexcel.com/archive2/75500/87639.htm
Taxstar
http://www.xcelfiles.com/VBA_Quick13.html
http://www.mrexcel.com/archive2/75500/87639.htm
Taxstar
Hi guys,
Looking for some help and would appreciate your help. I want to prevent people cutting/copy/pasting on a spreadsheet I have developed. A couple of users keep doing so which in turn knackers my formulas. There will be occasions where I will need to be able to use these functions for maintenance and updates. Ideally I would like have a private marcro which I can run to enable these features as and when needed.
I've been at this all morning and feel like I'm going round in circles. I've tried various bits of code (sourced via google etc) & have ended up with a whole manner of outcomes but not the one I want.
To summaraise what I am looking for is some vba code which will do the following Disable cut,copy and paste when sheet is opened Enable cut,copy and paste when closed Have a macro which when run will allow me to cut/copy paste so as to implement updates when necessary.
Can anyone help?
Thanks in advance
Looking for some help and would appreciate your help. I want to prevent people cutting/copy/pasting on a spreadsheet I have developed. A couple of users keep doing so which in turn knackers my formulas. There will be occasions where I will need to be able to use these functions for maintenance and updates. Ideally I would like have a private marcro which I can run to enable these features as and when needed.
I've been at this all morning and feel like I'm going round in circles. I've tried various bits of code (sourced via google etc) & have ended up with a whole manner of outcomes but not the one I want.
To summaraise what I am looking for is some vba code which will do the following Disable cut,copy and paste when sheet is opened Enable cut,copy and paste when closed Have a macro which when run will allow me to cut/copy paste so as to implement updates when necessary.
Can anyone help?
Thanks in advance
When using the copy and paste function it is extremely slow to paste the
result. Also the file size seems to be increasing to a much larger size for
no reason.
Any feedback would be appreciated.
result. Also the file size seems to be increasing to a much larger size for
no reason.
Any feedback would be appreciated.
Hi all,
I have some formulae in A1, is it possible for cell B1 to display the value only of A1 without the link to the formulae. I dont want to have to run a macro, or paste values, more of a formula that could be assigned to cell B1 so whenever A1 is changed, so is B1 automatically.
Thanks,
Pedro.
I have some formulae in A1, is it possible for cell B1 to display the value only of A1 without the link to the formulae. I dont want to have to run a macro, or paste values, more of a formula that could be assigned to cell B1 so whenever A1 is changed, so is B1 automatically.
Thanks,
Pedro.
Hey guys,
I want to know how to copy part of a cell and paste it into a new cell.
Example:
a1= 8hAs7c
portion needed: 7c
I used this formula:
=RIGHT(A1,2)
This returns 7c like I want.
However in the next cell I want to source the middle two (As)
And in another cell I want the first two (8h)
How do I go about this?
I want to know how to copy part of a cell and paste it into a new cell.
Example:
a1= 8hAs7c
portion needed: 7c
I used this formula:
=RIGHT(A1,2)
This returns 7c like I want.
However in the next cell I want to source the middle two (As)
And in another cell I want the first two (8h)
How do I go about this?
Suddenly, I lost the ability to use copy and paste by right clicking my
mouse. Using Office 2000. Can you help? Thank you!!!
mouse. Using Office 2000. Can you help? Thank you!!!
I can't find this solutions anywhere. I know how to send emails from Excel using VBA. When I get to the Body section, I want to insert a clickable link to a website, and also a clickable link to send an email (not as important as the website). Can this be done? I have found code to insert links to files, but none for website links.
Hi
I am a new user and trying to setup a database in excel. I can select all addresses and copy but when trying to paste into excel it does so in 1 cell.
Is there a way I can paste the separate email id's into individual cells so I don't have to do it individually?
Many thanks
Patrick
I am a new user and trying to setup a database in excel. I can select all addresses and copy but when trying to paste into excel it does so in 1 cell.
Is there a way I can paste the separate email id's into individual cells so I don't have to do it individually?
Many thanks
Patrick
I have a spreadsheet that when I copy the formula, it copies correctly
(changes the cells it should subtract), however, the result stays the same.
It matches the formula I copied it from, even though the cells to calculate
are now different. I even did a paste special and said only formula, but
still, same result. If I actually type in the formula, it works fine, but I
have a lot I need to copy and paste. Is there a way I can fix this?
Thanks,
(changes the cells it should subtract), however, the result stays the same.
It matches the formula I copied it from, even though the cells to calculate
are now different. I even did a paste special and said only formula, but
still, same result. If I actually type in the formula, it works fine, but I
have a lot I need to copy and paste. Is there a way I can fix this?
Thanks,
I have a co-worker's file that he is having trouble with. He is using Excel 2000 SP3. When copying a cell with a formula in it of "=D6+C6" and pasting it into the next cell down, it will display the same value in the cell as the calculated value from above, but has the correct formula displayed in the formula bar of "=D7+C7".
Example:
A1: 50
A2: 10
B1: 60
B2: 20
A3: Formula: =A1+A2 Displays: 60
Right click A3, Copy, right click B3, paste
A3 displays 60
When I click save, it will change the display value to 80.
I am trying this on his workstation and mine. Mine has Office 2010, so I think there might be an issue with the file itself.
Also, not just copy and paste. I can also just click the top cell after filling in the formula and then drag the bottom right of the cell downward and it will do the same of filling in the correct formula, but have the incorrect value.
I know that I could get him to just click save each time before really looking at the results, but that is just a band aid to the problem.
Any ideas how to fix this?
Example:
A1: 50
A2: 10
B1: 60
B2: 20
A3: Formula: =A1+A2 Displays: 60
Right click A3, Copy, right click B3, paste
A3 displays 60
When I click save, it will change the display value to 80.
I am trying this on his workstation and mine. Mine has Office 2010, so I think there might be an issue with the file itself.
Also, not just copy and paste. I can also just click the top cell after filling in the formula and then drag the bottom right of the cell downward and it will do the same of filling in the correct formula, but have the incorrect value.
I know that I could get him to just click save each time before really looking at the results, but that is just a band aid to the problem.
Any ideas how to fix this?
Corporate edict.
I have a worksheet that is locked and protected now, except for cells in a certain collumn. I have named the cells in that column "MS96A".
If a user enters a date in a cell or range of cells anywhere in the column, the changed cells also need to be locked and protected (Once they enter a date, it is not allowed EVER to be changed again. Corporate requirement! *Shrug*).
What I am looking for is this. If the user selects that cell again, they will get the usual pop-up message, "The cell or chart that you are trying to change is protected..."
I think I am close, but I am getting an "End If without block If" error on the If Clause.
Sub Worksheet_Change(ByVal Target As Excel.Range)
Dim MRange As Range
Set MRange = Range("MS96A")
' If Not Intersect(Target, MRange) Is Nothing Then For Each cell In MRange Sheets("Sheet1").Unprotect Password:="temp"
cell.Interior.ColorIndex = 3
cell.Font.Color = vbBlack
Selection.Locked = True
Selection.FormulaHidden = False
Next cell
ActiveSheet.Protect Password:="temp", _
DrawingObjects:=False, _
Contents:=True, _
Scenarios:=False
ActiveSheet.EnableSelection = xlUnlockedCells
End Sub
I have a worksheet that is locked and protected now, except for cells in a certain collumn. I have named the cells in that column "MS96A".
If a user enters a date in a cell or range of cells anywhere in the column, the changed cells also need to be locked and protected (Once they enter a date, it is not allowed EVER to be changed again. Corporate requirement! *Shrug*).
What I am looking for is this. If the user selects that cell again, they will get the usual pop-up message, "The cell or chart that you are trying to change is protected..."
I think I am close, but I am getting an "End If without block If" error on the If Clause.
Sub Worksheet_Change(ByVal Target As Excel.Range)
Dim MRange As Range
Set MRange = Range("MS96A")
' If Not Intersect(Target, MRange) Is Nothing Then For Each cell In MRange Sheets("Sheet1").Unprotect Password:="temp"
cell.Interior.ColorIndex = 3
cell.Font.Color = vbBlack
Selection.Locked = True
Selection.FormulaHidden = False
Next cell
ActiveSheet.Protect Password:="temp", _
DrawingObjects:=False, _
Contents:=True, _
Scenarios:=False
ActiveSheet.EnableSelection = xlUnlockedCells
End Sub
Newbie here and I don't know where to start... I'm trying to set up a macro to when data is pasted to a TEMPLATE worksheet tab it will automatically copy and paste data to another sheet based on the month value.
For example:
If data contains 06/01/2011 in cell A1, then data needs to be pasted to "Jun" worksheet within the same workbook.
Can someone assist or can give some direction? Thank you
For example:
If data contains 06/01/2011 in cell A1, then data needs to be pasted to "Jun" worksheet within the same workbook.
Can someone assist or can give some direction? Thank you
Hello All
I wonder if you could help with this one, I have a list of data like this (no spaces or other characters)
JN551122B
What I need to do is split each of the characters in to its own cell
if JN551122B was in cell A1 I'd want to return:
B2 C2 D2 E2 F2 G2 H2 I2 J2
J N 5 5 1 1 2 2 B
The nearest I have got is the right function, but it brings over the preceeding characters, and I need each character in its own cell. Hopefully I could copy/paste a formula and change the reference for each cell value, i.e. 1 would return J, 2 = N, 3 = 5, 4 = 5 etc.
Thanks for your help!
I wonder if you could help with this one, I have a list of data like this (no spaces or other characters)
JN551122B
What I need to do is split each of the characters in to its own cell
if JN551122B was in cell A1 I'd want to return:
B2 C2 D2 E2 F2 G2 H2 I2 J2
J N 5 5 1 1 2 2 B
The nearest I have got is the right function, but it brings over the preceeding characters, and I need each character in its own cell. Hopefully I could copy/paste a formula and change the reference for each cell value, i.e. 1 would return J, 2 = N, 3 = 5, 4 = 5 etc.
Thanks for your help!
ok. vba newbie...
i want to select and entire row in excel in sheet 1, and paste the entire row into sheet 2. (2 different worksheets in the same workbook)
what code do i need to do this?
i want to select and entire row in excel in sheet 1, and paste the entire row into sheet 2. (2 different worksheets in the same workbook)
what code do i need to do this?
I know that you can do PASTE > VALUES in order to keep your conditional formatting on an existing sheet, but sadly the people in my office are prone to not understanding this ("It's a bit technical") and so they just pasting blocks of text from elsewhere and lose it all.....
Does anyone have any suggestions about how to maintain the formatting when people just do a traditional C&P ?
Thanks
Does anyone have any suggestions about how to maintain the formatting when people just do a traditional C&P ?
Thanks
Is there a trick to copy-paste a group of cells into Outlook? I don't want to paste as a picture (shows up as an attachment and is lost when someone else Replies), but formatting is skewed when pasted as an Excel object. Right now I'm recreating the table in Word, then pasting, which doesn't loose formatting.
A specific problem is cells which don't have borders show up with very light grey borders in Outlook. This, I do not want.
TiA
A specific problem is cells which don't have borders show up with very light grey borders in Outlook. This, I do not want.
TiA